ERIA 81868 Smart siren User manual

81868 Smart siren
Brand
ERIA
Model
81868 Smart siren
Type
User manual

The ERIA 81868 Smart Siren is a reliable and easy-to-use siren that can be integrated into your smart home system to enhance security. It features a loud siren sound and bright LED lights that can be triggered by various events, such as motion detection or a triggered alarm. The siren can be easily paired with the Adurosmart Eria Hub or third-party ZigBee compatible hubs, allowing for remote control and monitoring through the Adurosmart app.

The ERIA 81868 Smart Siren is a reliable and easy-to-use siren that can be integrated into your smart home system to enhance security. It features a loud siren sound and bright LED lights that can be triggered by various events, such as motion detection or a triggered alarm. The siren can be easily paired with the Adurosmart Eria Hub or third-party ZigBee compatible hubs, allowing for remote control and monitoring through the Adurosmart app.

8. Use the included pin to press
the button that is located
behind the safety hole.
The light willslowly ash
 continuously for 60 seconds.
(Device is in pairing mode)
USER MANUAL
SMART SIREN
1. Insert the siren with the plug into an outlet.
2B. If you have a then third party ZigBee compatible hub proceed to step 8.
2A. Download the Adurosmart App from the Apple App Store or from
Google Play or go to http://adurosmart.com/adurosmart-app/
IOS
Android
3. Open the Adurosmart Eria APP. 5. Select “Devices”.
9. Proceed by pressing on “Search”
to allow the Adurosmart ERIA hub
to nd the siren, the LED indicator
on the hub will this ash green
indicates that the hub is searching
for devices.
10. When the siren has been found and paired successfully the siren will stop
ashing and it will show up in your search results, press on “Done” to
complete the process .
4. On the bottom right corner
press on "Settings".
Rooms
SecuritySecurityAutomationsAutomations SettingsSettingsRooms
Add Room
Living room
About & Feedback
Automations
Scenes
Rooms
Devices
Hub
[email protected]
Voice Assistants
Help center
SecurityAutomations Settings
Rooms
6. On the top right corner
press on the "+" symbol
then press on "Add device".
7. Press on "Sirens”.
Class
Lights
Sensors
Thermostats
Plugs
Door Locks
Lighting Controllers
Sirens
Devices
Click the “Add Device” button to add
devices
Add Devices
Pull down to refresh
B. If you have a third party hub,
then this is the moment to initiate
the search from your Smart Home
hub app.
For troubleshoots, instruction video's or more information
please visit us at www.adurosmart.com/faq
Chat with one of our support agents at
www.adurosmart.com
The Netherlands: +31 523687532
Support@Adurosmart.eu
NEED HELP? CALL US
LED FUNCTION TABLE
Connection mode Lights will ash once per second
for approximately 60 seconds.
(after 60 seconds the Lights will
stop ashing)
Connection Successful Lights will stop ashing , the siren
will appear in your smart home
APP.
Siren reset Lights will ash fast.(for 2 seconds)
Siren triggered
(when the siren is triggered)
Siren will sound and lights will ash
Search
Insrall code
Sirens
1. Make sure the thermostat is in paring mode.
2.Click the “Search” button to start searching
for new devices.
Search result Done
Se arch ing…
Warning Device 21
Siren-2231
www.adurosmart.com/manuals/smartsiren
  • Page 1 1

ERIA 81868 Smart siren User manual

81868 Smart siren
Brand
ERIA
Model
81868 Smart siren
Type
User manual

The ERIA 81868 Smart Siren is a reliable and easy-to-use siren that can be integrated into your smart home system to enhance security. It features a loud siren sound and bright LED lights that can be triggered by various events, such as motion detection or a triggered alarm. The siren can be easily paired with the Adurosmart Eria Hub or third-party ZigBee compatible hubs, allowing for remote control and monitoring through the Adurosmart app.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents