Argos 4557188 User manual

Type
User manual
Amy white bunk Trundle - 190x90 cm
Dimensions
Length - 186cm
Depth - 93cm
Height - 12cm
Weight - 11kg
Issue 1 - 15/05/14
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@ exa.dk
Assembly Instructions - Please keep for future reference 1876965
1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close
to its nal position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your oor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
Components - Parts
Please check you have all the parts listed below
2
Slat x3 (90.0x6.5x1.5cm)
1
Drawer front x1 (185.6x8.9x2.0cm)
4
Slat x13 (89.7x6.5x1.5cm)
2
Drawer back x1 (184.0x6.5x2.0cm)
3
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055
No. 12-01509001 No. 12-01508971
No. 12-02018401
No. 1331-18561-20
3
Please check you have all the ttings listed below
Ø26mm Castor white wheel x5
Tools required
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
B
3,5x12mm Chipboard screw x10
C
Components - Fittings
Phillips
screwdriver
(medium)
Ruler/tape
measure
3,5x30mm Chipboard screw x41
No. 3902-35012
No. 3901-35030
No. 4003-002
4
Assembly Instructions
Step 1
Attach the slats 1 to the
drawer back 3 and to
the drawer front 4 with
screws B.
Please make sure that
all are in right angle (90
degrees) before you
continue!
920 mm
5 mm
40 mm
40 mm
upside down
upside down
upside down
Please make sure that
all are in right angle
(90 degrees)
before you continue!
upside
B
B
BB
1 1 1
3
4
1
34
B
B
B
B
B
B
B
B
B
B
B
B
Assembly Instructions
Step 2
Attach the slats 2 to
the drawer front 4 and
the drawer back 3 with
screws B.
5
upside
83 mm
2
1
B
BB
3
2
3
4
4
B
B
6
Assembly Instructions
Step 3
Attach the castor wheels
A to the slats 1 with
the screws C.
Assembly is complete.
If you need help or have damaged or missing parts,
call the Customer Helpline:
0045 7668 8055
E-mail: order@ exa.dk
50 mm
Ref.no. 44-00029-20 A Stand: 150514 Page 7 (82-20001-20)
C
C
C
C
A
C
C
2
1
3
2
1
4
3
2
1
3
2
1
4
A A
1
40 mm
upside down
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Argos 4557188 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI