Argos Flexa 3395884 Assembly Instructions Manual

Brand
Argos
Model
Flexa 3395884
Type
Assembly Instructions Manual
Drawer set White for Daybed.
Dimensions
Length - 186cm
Depth - 46,5cm
Height - 23cm
Weight - 12 kg
Issue 1 - 11/11/14
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@fl exa.dk
Assembly Instructions - Please keep for future reference
3395884
1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fi ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your fl oor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
Components - Parts
Please check you have all the parts listed below
Drawer back x3
(57,5x17x1.5cm)
3
No. 12-01505751
Drawer base x3
(58.6x44,5x0.3cm)
1
No. 4309-0305861
Drawer front x3
(61,8x21,5x1.5cm)
2
No. 15-01506182-20
Drawer side left x3
(45x17x1.5cm)
4
No. 12-01504502
Drawer side right x3
(45x17x1.5cm)
5
No. 12-01504501
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055
2
Please check you have all the fi ttings listed below
7x34mm for ø5 Minifi x bolt x12
Tools required
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more fi ttings
may be supplied than are required.
ø15x9.5mm Minifi x cam x12
B
E
3,5x15mm Chipboard screw x8
C
D
Components - Fittings
3.5x12mm Chipboard screw x24
3
F
No. 4001-022-20
ø26x28.5mm Castor x12
4,0x45mm Chipboard screw x3
ø40x30mm Knob x3
No. 3903-40045
H
G
4.0x40mm Chipboard screw x18
No. 3901-40040
I
Phillips
screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
J
8x30mm Dowel x12
No. 3930-08030
40x20x17mm Angle x4
No. 4008-024
No. 3901-35015
No. 4003-002
No. 3933-15010
No. 4020-005
No. 3902-35012
Assembly Instructions
Step 1
Attach the dowels
G
to
the drawer sides
5
and
4
.
It may be necessary
to tap the dowels in
very gently with a small
hammer.
Attach minifi x bolts
A
to
drawer fronts
2
.
Repeat for all drawer
sides and drawer fronts.
Attach the knobs
F
to
the drawer fronts
2
with
screws
I
.
Repeat for all three
drawer fronts.
Attach the drawer sides
5
and
4
to the drawer
front
2
with the minifi x
cams
B
.
Repeat for all three
drawers.
Step 2
Step 3
2
4
5
2
5
4
2
B
B
I
F
A
A
G
G
A
G
F
I
B
4
Assembly Instructions
Step 4
Push the drawer base
1
carefully into the drawer.
Repeat for all three
drawers.
Attach the drawer back
3
to the drawer sides
5
and
4
with screws
H
.
Repeat for all three
drawers.
Attach the castors
D
to
the drawer sides
5
and
4
with the screws
J
.
Follow the measurement.
Repeat for all three
drawers.
5
Step 6
Step 5
1
5
4
5
4
3
5
5
4
D
J
J
D
D
J
D
J
D
H
H
H
J
D
35 mm
Place one stop bracket
E
to the list for slats on
the bedside. Follow the
measurement. Make
sure that the bracket
E
is fl ush with the backside
of the bedside. Fasten
the stop bracket
E
with screws
C
. Attach
another bracket
E
to
the other end of the list.
Attach two more brackets
E
to the list placed 572
mm from the brackets
E
at the ends of the list.
Assembly is complete.
Assembly Instructions
Step 7
6
20 mm
5
C
E
E
C
E
C
E
C
E
C
If you need help or have damaged or missing parts,
call the Customer Helpline:
0045 7668 8055
E-mail: order@fl exa.dk
Ref.no. 44-01427-20 A Stand: 111114 Page 7 (82-20101-20)
E
C
572 mm
C
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Argos Flexa 3395884 Assembly Instructions Manual

Brand
Argos
Model
Flexa 3395884
Type
Assembly Instructions Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents