2. FLEXCO
  3. Segmented Transfer Plate

FLEXCO Segmented Transfer Plate Operating instructions

  • I've reviewed the installation instructions for the FLEXCO Drop Bracket Kit 56732. This kit includes two long mount brackets and installation hardware to support STP installations. It’s designed for situations where a longer backplate is needed, such as in power curves or inclined conveyors. I'm ready to answer your questions about the product and its installation.
  • What does Kit 56732 include?
    What is Kit 56732 intended for?
    Does this kit include the stainless steel front plate?
1. Reference Segmented Transfer Plate IOM (X4064 & 6041) for full installation details. is sheet is only to guide the installation of the optional
mounting bracket. Kit 56732 contains two long mount brackets and installation hardware.
NOTE: Kit 56732 is intended for STP installations that require a longer backplate. Typical applications include power curves, horizontal to
horizontal conveyors and horizontal to incline/decline where there is not sucient conveyor structure to support the universal mount backplate.
is kit does not include Item code GR538 stainless stee front plate. is item is included on your STP kit.
STP Long Drop Bracket (Kit 56732)
Instructions for Installation
2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 • USA
Tel: (630) 971-0150 • Fax: (630) 971-1180 • E-mail: info@flexco.com
Visit www.flexco.com for other Flexco locations and products.
©2020 Flexible Steel Lacing Company. 06-29-21. For Reorder: X6304
2. Position the bracket between the pulleys. 3. Insert the backplate between the pulleys
and align the vertical slot with the horizontal
conveyor slots.
4. Secure the backplate using the provided
hardware. e backplate can also be welded
to the structure. Follow welding instruction
mentioned on X4064
5. Install the transfer plate and follow steps 1
to 14 of IOM X4064. Once STP has been ad-
justed to proper height; tighten the fasteners
until the washers are compressed and plus ¼
to ½ a turn.
/