2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical supplies
  5. Electrical wallplates
  6. FLEXCO
  7. Segmented Transfer Plates

FLEXCO Segmented Transfer Plates Operating instructions

  • Hello, I've reviewed the document for the FLEXCO Transfer Plate Hardware Kit 56744. This document provides installation instructions for the stainless steel hardware kit intended to meet FDA compliance for food packaging and related applications. The kit includes components like a stainless steel bar, back plates and fasteners. I'm ready to answer any questions you have about the device or its installation.
  • What is the intended use of Kit 56744?
    What kind of applications is Kit 56744 suitable for?
    Can Kit 56744 have direct contact with food?
NOTE: This product is not intended for applications that have direct contact with food.
1. Reference Segmented Transfer Plate IOM (X4064 & 6041) for full installation details. is sheet is only to guide the installation of the
optional mounting hardware. Kit 56744 contains one 60" (1524 mm) stainless steel bar, two (2) stainless steel back plates and installation
hardware. It is intended to replace all galvanized and painted metal parts.
Segmented Transfer Plate (STP)
Stainless Steel Hardware (Kit 56744)
Instructions for Installation
2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 • USA
Tel: (800) 541-8028 • Fax: (630) 971-1180 • E-mail: info@flexco.com
Visit www.flexco.com for other Flexco locations and products.
©2021 Flexible Steel Lacing Company. 12/08/21. For reorder: X6309
Kit 56744 is intended for STP installations that require stainless steel hardware in order to meet FDA material compliance. Typical applications
include industrial baking, protein packaging, confectionary packaging, pet food packaging, and other food packing applications. Kit 56744 is also
suitable for single-use installations (SUI) in pharmaceutical and medical device manufacturing operations where the product is allowed to be
used once and then is discarded.
Item Description Quantity
1 Stainless Steel Bar 60” (1524 mm) 1
2 Nut Hex 10-24 Stainless 4
3 Screw FHCS 10-24x1.25 Stainless 4
4 Screw SHCS 10-24x5/8 Stainless 4
5 Stainless Steel Rear mounting Plate 2
6 Stainless Steel Shims 2
7 Washer Flat 10-24 .365 OD Stainless 4
1
2
3
6
4
5
7
2. Replace the indicated items with the new stainless steel components. All metal components of the STP (with the exception of the front plate)
must be replaced with stainless steel parts. is includes the support bar, end plates and hardware (fasteners, washers, shims).
3. Use food grade anti seize on all threaded joints.
Reuse End
Plastic Segment
Reuse Center
Plastic Segments
Reuse Front
Plate
Replace
Hardware
Replace Bar
Replace
Back Plate
Reuse End
Plastic Segment
Patents: www.flexco.com/patents
/