Weatherables PKPI-3-3X8 Operating instructions

Chelsea 3 x 8 - 3" Picket Wide Spacing w/ Straight Top

3" typ.

23"

Updated 10/03/08

* Sizes may vary slightly

* Pickets are grayed for illustration only!

* Put a small amount of glue around the inside of the picket before inserting cap.

Installation Instructions

Note: Your gate is the same as a panel, allow enough room for it to swing freely on the bottom.

Install posts as per post instructions in customer packet

Insert all bottom rails (the rail with metal) into posts

Insert all top rails into posts being sure the smaller (3" slots) slots face skyward

Insert the pickets through the top rail (will need to use some force) into the bottom rail

Be sure to install the picket sizes as per drawing

After all of the pickets are installed you may glue the caps

96" Center to Center*

Material per 3' X 8' section

Qty Item Dimension

37"

1.75" x 3.5" x 95.75"

1 Bottom Rail 1.75"x 3.5" x 95.75" *

1 Top Rail 1.75"x 3.5" x 95.75" *

1 Alum U Chan Fits 1.75"x 3.5" x 95.75"

15 Picket Caps Fits 7/8"x 3"

15 Pickets 7/8"x 3" x 34" *

This manual is also suitable for

Download PDF