1
2
3 4
1
2
3
4
!
Use the correct fastening method (Concrete dowels for concrete, drywall Anchors
for drywall etc.) to attach the wall bracket. Make sure it is mounted straight as
shown in the picture.
Mount the speaker bracket to the speaker, make sure the orientation is the same
as in the picture. Before step 3, connect the speaker cables.
Fasten the speaker bracket to the wall bracket and use a screwdriver to lock the
screws in place.
You are now done with your installation. Happy Listening!
Using Flush Mount with SPIRITSeries
/