Pocket MP3 player III 256 Installation Guide
ENGLISH
3
1 INTRODUCTION
Your Pocket MP3 player III 256 combines a digital audio player, USB Flash memory drive, SD/MMC
card reader, Digital Voice Recorder and FM Radio Tuner.
This installation guide is a summary of the installation instructions. The full user guide with an
explanation of the functionality of the MP3 player is stored on the enclosed CD-rom in PDF format.
After you finish using the player, put the user guide away in a safe place for further reference.
2 WARNING
• The Pocket MP3 player III can be damaged when you remove the unit from the USB port during
file transmission.
• To prevent fire or shock hazard, do not expose the unit to rain or moisture.
• To reduce the risk of electric shock, do not disassemble the unit.
• TOPCOM is not responsible for any loss of data stored on the Pocket MP3 player III. Therefore it
is important to backup all stored data on your PC.
3 BATTERY PLACEMENT AND USB CHARGING
The Pocket MP3 player III will charge the installed battery
when connected to the USB port.
For the first time use, it takes 4 to 5 hours to fully charge
the battery.
1. Press the battery cover and slide it away from earphone
connector.
2. Install the enclosed rechargeable NiMh battery following the
polarity as shown.
3. Connect the MP3 player to your USB port
4. The display indicates that the unit is charging.
5. When the battery is full, the charging icon disappears.
Only connect the unit to the USB port with a “AAA” rechargeable
NiMh
battery installed. Do not charge this unit through the USB port when a
regular “AAA” alkaline battery is installed.
+
Charging Battery....
USB CONNECT