Tokai CD-103 User manual

Page is loading ...

7

DESCRIPTION DE L’APPAREIL & IDENTIFICATION DES COMMANDES

Vue avant

Vue arrière

1. CAPTEUR TELECOMMANDE INFRA-ROUGE

2. BOUTON ALIMENTATION (POWER)

3. INDICATEUR DE VEILLE (STANDBY)

4. BOUTON LECTURE/PAUSE (PLAY/PAUSE)

5. BOUTON STOP/USB/SD

6. AFFICHAGE LCD

7. BOUTON PRECEDENT (BACK)

8. BOUTON SUIVANT (NEXT)

9. BOUTON VOLUME

10. BOUTON Répétition/Program/Heure

(REP/PROG/TIME)

11. BOUTON FONCTION (FUNCTION)

12. PRISE ENTRÉE AUXILIAIRE (AUX IN)

13. PRISE CASQUE (PHONES)

14. FENTE POUR CARTE MEMOIRE SD/MMC

15. PORT COMPATIBLE USB

16. ENCEINTES GAUCHE ET DROITE

17. FIL ANTENNE FM

18. BORNES DE CONNEXION ENCEINTES GAUCHE et

DROITE

19. PORTE COMPARTIMENT CD

20. PRISE ENTREE SECTEUR (AC IN)

Page is loading ...

20

BEFORE WE BEGIN

Thank you for purchasing the TOKAI CD-103 a Bluetooth Micro system with a digital FM RADIO

with auto scanning and until 30 FM presets.

This is your assurance of quality, performance and value. Our engineers have included many useful and

convenient features in this product. Please be sure to read this instruction Manual completely to make sure

you are getting the maximum benefit from each feature.

This product was manufactured using the highest quality components and standards of workmanship. It was

tested by inspectors and found to be in perfect working order before it left our factory. For future reference,

record the serial number in the space provided.

Model No: TOKAI CD-103

Serial Number: _________________________________________________________

EXCLUSIVE IMPORTER

This product was imported by the Company: LEMA S.A.S.

For any questions concerning the conformity of the product, thank you to send your request to:

LEMA S.A.S.

28, Boulevard Zéphirin Camélinat

92230 GENNEVILLIERS

FRANCE

21

WARNINGS

TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

LIGHTNING FLASH WITH ARROWHEAD SYMBOL -

Within an equilateral triangle, is intended to alert the user to the presence of uninsulated

dangerous voltage within the products enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

EXCLAMATION POINT - within an equilateral triangle is used to indicate that a specific

component shall be replaced only by the component specified in that documentation for safety

reason.

DRIPPING WARNING

The product shall not be exposed to dripping or

splashing and that no objects filled with liquids,

such as vases, shall be placed on the product.

VENTILATION WARNING :

The normal ventilation of the product shall not be

impeded for intended use.

Class ll equipment symbol. This symbol indicates

that the power adaptor has a double insulation system.

IMPORTANT! It is recommended not to leave a mobile phone near the unit in order to avoid

electromagnetic interference in the speakers.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING LABEL INFORMING OF

RADIATION :

This label is placed inside the unit.

As shown in the illustration. To warn against further

measures on the unit. The equipment contains a

laser radiating laser rays according to the limit of

laser product of class 1.

22

SAFETY INTRUCTIONS

1. READ INSTRUCTIONS --- All the safety and

operating instructions should be read before the product

is operated, followed and retained for future reference.

2. CLEANING --- Unplug this product from the wall

outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

3. WATER AND MOISTURE --- Do not use this product

near water - for example, near a bath tub, wash bowl,

kitchen sink, or laundry tub; in a wet basement; or near a

swimming pool; and the like.

4. ACCESSORIES --- Do not place this

product on an unstable cart, stand, tripod,

bracket, or table. The product may fall,

causing serious injury to a child or adult

and serious damage to the product. Use

only with a bracket, or table recommended by the

manufacturer, or sold with the product. Any mounting of

the product should follow the manufacturer instructions,

and should use a mounting accessory recommended by

the manufacturer. A Product and Cart Combination

should Be Moved with Care - Quick stops, excessive force

and uneven surfaces may cause the product and cart

combination to overturn.

5. VENTILATION --- Slots and openings in the cabinet

are provided for ventilation and to ensure reliable

operation of the product and to protect it from

overheating, and these openings must not be blocked or

covered. The openings should never be blocked by

placing the product on a bed, sofa, rug or other similar

surface. This product should not be placed in a built-in

installation, such as a bookcase or rack, unless proper

ventilation is provided or the manufacturer* instructions

have been adhered to.

6. POWER SOURCES --- This product should be

operated only from the type of power source indicated on

the marking label. If you are not sure of the type of

power supply to your home, consult your product dealer

or local power company. For products intended to

operate from battery power, or other sources, refer to the

operating instructions.

7. POWER-CORD PROTECTION --- Power-supply

cords should be routed so that they are not likely to be

walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs,

convenience receptacles, and the point where exit from

the product.

8. NON-USE PERIODS --- The power cord of the

product should be unplugged from the outlet when left

unused for long periods of time.

9. LIGHTNING --- For added protection for this product

during a lightning storm, or when it is left

unattended and unused for long periods of time, unplug it

from the wall outlet and disconnect the antenna or cable

system. This will present damage to the product due to

lightening and power-line surges.

10. OVERLOADING --- Do not overload wall outlets,

extension cords, or integral convenience receptacles as

this can result in a risk of fire or electric shock.

11. OBJECT AND LIQUID ENTRY --- Never push

objects of any kind into this product through openings as

they may touch dangerous voltage points or short-out

parts that could result in a fire or electric shock. Never

spill liquid of any kind on the product.

12. SERVICING --- Do not attempt to service this

product yourself as opening or removing covers may

expose you to dangerous voltage or other hazards. Refer

to all servicing to qualified service personnel.

13. DAMAGES REQUIRING SERVICE --- Unplug this

product from the wall outlet and refer servicing to

qualified service personnel under the following

conditions.

a) When the power-supply cord or plug is damaged.

c) If the product has been exposed to rain or water.

b) If liquid has been spilled, or objects have fallen into

the product.

d) If the product does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as an

improving adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the product to its

normal operation.

e) When the product exhibits a distinct change in

performance - this indicates a need for service.

14. REPLACEMENT PARTS --- When replacement

parts are required, be sure the service technician has

used replacement parts specified by the manufacturer or

have the same characteristics as the original part,

Unauthorized substitutions may result in fire electric

shock and other hazards.

15. HEAT --- the product should be situated away from

sources such as radiators, heat registers, stoves or other

products that produce heat

23

HEADPHONE JACK

If you don’t want to disturb other people during your listening, you can plug your earphones/headphone into

the PHONE jack. The audio from the speaker will be muted and you can enjoy your listening from your

earphones/headphone.

Establish a safe sound level :

Pay attention! Over time your hearing will adapt to continuous loud sounds and will give the impression that

the volume has in fact been reduced. What seems normal to you may in fact be harmful. To guard against

this before your hearing adapts, set the volume to a low level.

Slowly increase the level until you can hear comfortably and clearly and without distortion. Damage to your

hearing is accumulative and is irreversible. Any ringing or discomfort in the ears indicates that the volume is

too loud. Once you have established a comfortable listening level, do not increase the sound level.

SAFE SOUND CARE

Notes:

1. Reduce volume before plugging the earphones/headphone.

2. Speaker of the unit is automatically disconnected while earphone /headphones are

connected.

3. Adjust the volume to a comfortable listening volume level.

PREPARATION FOR USE

Unpacking and set up

Place the unit on a flat and stable surface so that it cannot be reversed.

 Carefully remove all the components from the carton and remove all packing materials from the unit.

 Make sure nothing is accidentally discarded with the packing materials.

 Remove any descriptive labels that may be found on either the front or top cabinet of the unit. Do not

remove any labels located on either the back or button cabinet of the unit.

 Press the CD door OPEN Button to open the CD compartment door. There is a white card in the CD

compartment which is intended to prevent the CD pickup from moving during shipment of the product,

Remove this card from the CD compartment before use.

 Save the carton and the packing materials, if possible, in the unlikely event that the unit ever needs to be

returned for service. Using the original carton and packing material is the only proper way to protect the unit

from shipping damage.

CD-103 Remote Control User manual

24

POWER SUPPLY

CONNECTING TO AC POWER

1.Connect the power cord to the AC mains inlet and the wall outlet. The power supply is now connected and

ready for use.

2.To switch off completely, unplug the power cord from the wall outlet.

 Unplug the power cord from the wall outlet to protect your set during heavy thunderstorms.

SPEAKER CONNECTIONS

Connect the Left and Right speakers (16) to the left and right speaker wire connectors (18) at the back of the

unit, before connecting the unit to AC Power.

25

DESCRIPTION OF THE UNIT

Front View

Rear View

1. REMOTE SENSOR

2. POWER BUTTON

3. STANDBY INDICATOR

4. PLAY/PAUSE BUTTON

5. STOP/USB/SD BUTTON

6. LCD DISPLAY

7. BACK BUTTON

8. NEXT BUTTON

9. VOLUME BUTTON

10. REPEAT/PROG./TIME BUTTON

11. FUNCTION BUTTON

12. AUX IN JACK

13. PHONE JACK

14. SD/MMC SLOT

15. USB Compatible PORT

16. LEFT & RIGHT SPEAKER BOXES

17. FM ANTENNA WIRE

18. SPEAKER WIRE CONNECTORS (L/R)

19. CD DOOR

20. AC SOCKET

26

BASIC OPERATIONS

1. REMOTE SENSOR

2. POWER BUTTON

-Press POWER button to turn on/off power.

3. STANDBY INDICATOR

4. PLAY/PAUSE BUTTON

- Start or pause MP3/CD/USB/BLUE play.

-In radio mode, press the play/pause button enter the

automatic channel scan mode.

5. STOP/USB/SD BUTTON

- Stop CD/MP3/USB/SD playback; erase a CD program.

- Press and hold more than 1.5 sec change USB1.1/SD

media.

6. LCD DISPLAY

- Show the FM dial frequency.

- Show the number of tracks.

7. BACK BUTTON

- BACK track selection.

- Press and hold more than 1.5 sec BACK search intra

track.

-In the radio mode, press BACK will enter the low end of

the manual channel scan mode.

8. NEXT BUTTON

- NEXT track selection.

- Press and hold more than 1.5 sec forward search intra

track.

- In the radio mode, press NEXT will enter the high-end

manual channel scan mode.

9. VOLUME KNOB

-Adjust volume level.

- Turn left (or right) & push within 1 sec. and then release

can adjust the volume level.

- Turn left (or right) and long push to quickly adjust the

volume level.

10. REPEAT/ PROGRAM/ TIME BUTTON

- Repeat a track CD/MP3/USB program.

- Repeat mode: normal->repeat 1->repeat all->

repeat album ->normal.

- for CD/MP3/USB status, when the unit is in the

stop mode, short press down this button can enter

on programming function for CD/MP3/USB.

- for Radio status, when the unit is in working status,

short press down this button can enter on

programming function for Radio.

-In the working status, short press this button

can on CD/MP3/USB/RADIO for programming.

Remark: the Max Programming track:

for CD song, the Max programming track is 20 tracks

for MP3 song, the Max programming track is 99 tracks

for Radio station, the Max programming is 30 stations

-In standby mode, to setup the time of the unit.

11. FUNCTION BUTTON

- Select source of sound CD/USB/BLUE/AUX/RADIO.

12. AUX JACK

-The built-in AUX jack.

13. PHONES JACK

-The built-in PHONES jack.

14. SD SOCKET

-The built-in SD MMC jack.

15. USB COMPATIBLE SOCKET

-The built-in USB jack.

16. LEFT&RIGHT SPEAKER BOXES

17. FM ANTENNA

-to improve FM reception.

18. SPEAKER WIRE CONNECTORS (L/R)

19. CD DOOR

20. AC LINE CORD

27

REMOTE CONTROL

* Please pull out the plastic paper from the battery door before use the remote control.

* When the remote control operation becomes unstable or the distance from which the remote control works is shorter. Replace the

batteries with new ones.

* Using the remote control unit

To use the remote unit, point at the REMOTE SENSOR and press the buttons gently and firmly . Remote control operation is possible

within approximate 18ft (6m). However, since the remote control range is less when the unit is used at an angle, use directly in front

of the REMOTE SENSOR , for maximum distance.

Do not expose the REMOTE SENSOR to strong light(direct sunlight or artificial lighting)and make sure that there are no obstacles

between the REMOTE SENSOR and the remote control unit.

USE REMOTE CONTROL OTHER IMPORTANT BUTTON

P-UP / P-DN

- in the radio mode, press these buttons to select desired preset station number.

- in the MP3 mode, press these buttons to select the NEXT/PREV folder/album.

RANDOM BUTTON

-In the player CD/MP3/USB/AUX, press the RANDOM button can be played at random. Press again to cancel.

BBS BUTTON

-In the player CD/MP3/USB/BT/AUX/RADIO, press the BASS button to enhance the heavy bass effect.

Press again to cancel.

EQ BUTTON

-In the CD/MP3/USB/BT/AUX/RADIO mode, press the EQ button to change music style among 5 equalizer levels.

-When playing the music, press this button to select the sound effect: classic-rock-popular-jazz-FLR.

MUTE BUTTON

-In the CD/MP3/USB/BT/AUX/ RADIO mode, press the MUTE button to mute the sound.

Press again to restore the sound.

INTRO BUTTON

-In the CD/MP3/USB mode, press the INTRO button to browse 10 seconds of each track of the repertoire, press again to

cancel this function.

1. POWER BUTTON

2. TIME BUTTON

3. INTRO BUTTON

4. MUTE BUTTON

5. RANDOM BUTTON

6. P-UP BUTTON

7. REPEAT BUTTON

8. PROGRAM BUTTON

9. BACK BUTTON

10. FUNCTION BUTTON

11. NEXT BUTTON

12. EQ BUTTON

13. PLAY/PAUSE BUTTON

14. P-DOWN BUTTON

15. BBS BUTTON

16. STOP BUTTON

17. NUMBER KEY

18. VOL- BUTTON

19. VOL+ BUTTON

28

USE CLOCK

To setup the time of the unit

1. Connect the AC ON (The following operation must be in standby mode).

2. Short press on the TIME button, the time digits will be flashing on the LCD display.

3. Press BACK, NEXT buttons to select the time format display by 12h or 24h.

4. Press TIME button to confirm.

5. Then you can set the hour and the minute with the same method of steps 3-4.

ON/OFF TIMER

After setup the time of unit, long press on the TIME button can setup the unit ON & OFF time, with the same

method of steps 3-4.

- Long press on TIME button “ON” will display 2 sec. then the digits of time will flash. Set the hour and

minute of the starting time with same method of steps 3-4.

- Press TIME to confirm, then “OFF” will display 2 sec. then the digits of time will flash. Set the hour and

minute of the Power OFF Time of the unit with same method of steps 3-4.

- Then the Audio source selection will flash : you can select Radio, CD, USB, SD, or AUX source with BACK

/ NEXT buttons, press TIME to confirm,

- Then the Volume level selection will flash, select the suitable volume level with BACK/NEXT buttons and

press TIME to confirm.

- After the settings are finished, the unit will show on the display the ON programmed time + OFF

programmed time + audio source + volume level, then return to normal Clock display.

RADIO OPERATION

RADIO

Radio reception

1. Press FUNCTION button select RADIO mode.

2. Tune to required station by press BACK or NEXT button.

Manual Tuning: Press BACK or NEXT and then release within 1 sec.

Auto Tuning: Press the play/pause button enter the automatic channel scan mode, and to be automatically

set.

To call back the auto preset channels, press Play/Pause button on the unit.

To Preset Channel :(FM 30 Preset memories)

(1) Press BACK or NEXT Select desired station.

(2) Press PROGRAM button once , the MEMORY number indicator begins steady in the display.

(3) Push PRESET- DOWN or PRESET-UP buttons (on the remote control) to select the desired number.

(4) Press PROGRAM button to save that station.

(5) Repeat steps (1) to (4) procedures to preset other stations.

3. After end of program. Press Play/Pause button to start play the frequency that you selected or press

number key on the remote control.

4. Push [VOL-]or [VOL +] to adjust the volume.

5. Extend ANTENNA wire to its full length to improve reception of FM broadcasting.

6. To turn OFF the radio press FUNCTION button to select another mode or press power button to switch OFF

the unit.

7. Switch ON again after shut down, the memory frequency still exists.

29

BLUETOOTH MODE

* The operational range between this unit and a Bluetooth device is approximately 10 meters, different

BLUETOOTH devices may be slightly different operation,

* Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the

device (IPHONE, IPAD, MOBILE PHONE,etc.) by reading the device instructions.

* Compatibility with all Bluetooth devices is not guaranteed.

* Any obstacle between this unit and a Bluetooth device can reduce the operational range.

* Keep this unit away from any other electronic device that may cause interference.

In order to avoid interferences, please de-activate Wi-Fi on your device (Smartphone, tablet, etc…)

when playing music using Bluetooth.

PAIRING YOUR BLUETOOTH DEVICE

Note: Prior to use Bluetooth function, your TOKAI micro system should be paired firstly with your

Bluetooth device (refer to Bluetooth operation of your external device).

Press FUNCTION button and select BLUE mode.

Search BLUETOOTH equipment“CD-103" model for connection.

Enable the Bluetooth function of your Bluetooth audio source device to make it discoverable (see your

device’s operation instructions to add or setup a Bluetooth device).

Select CD-103 on your Bluetooth device to make the pairing.

If required by the External Bluetooth audio source, enter default password “0000”.

PLAYBACK

1. Press PLAY/PAUSE button to play or pause playback.

2. Push [VOL-] or [VOL +] to adjust the volume level.

3. Press BACK or NEXT to select tracks.

LISTEN TO MUSIC FROM BLUETOOTH EXTERNAL DEVICE

- If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music

stored on the external device through the TOKAI CD-103. You can control music via the Micro System.

- If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the TOKAI CD-103 remote control

to play music and control playback of the music stored on the external device.

USE AUX

The auxiliary input of your Micro system allows you to connect an external source (such as : mp3 player,

discman, walkman) and play its content through your TOKAI CD-103.

1. Connect your external audio equipment to the AUX IN JACK (12).

2. Press FUNCTION to select AUX. The sound source of the Mp3 or discman or walkman will output from

the unit.

3. Push the volume control to adjust the Volume.

Note: The unit cannot control the player.

30

PLAYING USB / SD MEMORY CARD

The unit is designed to play MP3 audio files contained in a USB key, if the files are not in MP3 format, the files

cannot be read correctly.

-USB/Memory Card audio functions

1) Insert one USB key in the USB compatible port (15) or one SD/MMC memory card in the SD/MMC Slot (14).

The unit will read the USB and playback automatically if no CD disc loaded.

2) Press FUNCTION button or STOP/USB/SD button to choose the USB or SD state.

3) If playback of USB or SD/MMC cart does not start automatically, press PLAY/PAUSE button to start

playback and/or press again to pause the playback.

4) Use the NEXT, BACK buttons for SKIP next/back search.

5) You can program up to 99 Tracks (refer to PROGRAM Play mode under CD/MP3 PLAYER section).

6) Repeat mode: normal->repeat 1->repeat all->repeat album ->normal

(There is no repeat album mode in program PLAY mode)

7) Maximum Folder: the unit can support up to max. 99 Folders (in the USB / SD memory card)

8) Maximum File : the unit can support up to max. 999 Files (in the USB / SD memory card)

-Press and hold the [STOP] key more than 1.5sec at USB mode, system will change to SD mode.

Then“SD” will be displayed. At this moment, system will read the SD memory card.

- If a device is successfully read, then the corresponding device is ready to play a file.

- If a device fails to be read, then“NO”will appear on the Display to indicate that there is no device .

*Notice : If no device is connected or the player fails to read the device when user switch over USB to SD with

pressing [STOP] key, then“NO”is display and the system moves into the STOP mode.

Notice:

-When the unit has not a disc, inserting the USB/SD card will read the USB/SD card automatically,

it read the USB first while having a USB.

-The unit doesn’t support the HDD all and the portion USB with Mp3 player.

CD/MP3 PLAYER

CD/MP3 Player

This CD-player can play Audio Discs, MP3 CD-R, CD-RW. Do not try to play CD-ROM, CDi, VCD, DVD or

computer CD.

1. Press FUNCTION button to CD mode.

2. To open the CD door, press CD open/close button on the right side of the CD door.

3. Insert a mp3/CD or CD-R, with the printed side facing up and press CD door gently to close.

4. Press play/pause on the set to start playback.

5. Press the play/pause button again to pause the playback, press once more to resume playback.

6. To stop CD playback, press STOP button.

Note: CD/mp3 play will also stop when:

-you open the CD compartment;

-you select radio sound source;

-the CD/mp3 has reached to the end.

31

Selecting a different track

During playback you can use BACK or NEXT button to select a particular track.

 if you have selected a track number in the stop or pause position, press PLAY/PAUSE to start playback.

 Press NEXT once briefly for the next track, or press repeatedly until the desired track number appears in

the LCD display.

 Press BACK once briefly to return to the beginning of a current track.

 Press BACK more than once briefly for selecting a previous track.

Finding a passage within a track

1. Press and hold down BACK or NEXT.

 the CD is played at high speed.

2. When you recognize the passage you want release BACK or NEXT.

 normal playback will resume.

Different play modes: Repeat

Repeat-play the current track continuously.

Repeat all-plays the entire CD continuously.

Playing tracks in random order after press the RANDOM button, the tracks will be played in random order.

Program- plays your favorite tracks in a programmed playlist.

Notice: When connecting AUX while the CD is playing, the sound of AUX will output .But the CD will not stop working.

Repeat function during CD playback

1>playing tracks in Repeat mode after press REPEAT button one time, the LCD display will show (Repeat the current

track):

2>playing tracks in Repeat mode after press REPEAT button 2nd time, the LCD display will show (Repeat ALL tracks of

the CD):

3>playing tracks in Repeat mode after press REPEAT button 3rd time, the LCD display will show (Repeat ALBUM in CD

MP3 mode):

4>release tracks in playing mode after press REPEAT button 4th time, Repeat indicator goes off, the displaying will be

show (Repeat function is cancelled) :

Notice:

-If there is no folder in the CD disc, pressing REPEAT a third time, it will go to the step 4 directly.

-If the format of music isn't Mp3, the LCD will not display Mp3.

-If it is playing a USB, the LCD will display USB.

32

Different play modes: Program

Program- using main unit, program function can be operated when the unit is in stop position.

1>> when the unit is playing a CD DISC:

A>press“program”key of remote control one time in stop position, the LCD display will show:

B>Press BACK or NEXT to select your favorite track No. and then the LCD display of unit will show as following (track

number), then press“program”again to confirm the first track memory :

C>Repeat the above operation to program the next favorite tracks until max. 20 tracks, you can rotate BACK or NEXT

to select your favorite track.

D>Press PLAY button to play the programmed tracks once finished, the LCD display of unit will show:

E>press STOP button one time to stop the program play, press STOP button one more time to erase all programmed

tracks.

2>> when the unit is playing an Mp3 DISC:

A>press“program”key of remote control one time in stop position, the LCD display will show:

B>Press BACK or NEXT to select your favorite track No. and then the LCD display of unit will show as following, then

press“program”again to confirm.

C>Repeat the above operation to program the next favorite track until max. 99 tracks in CD MP3 disc, you can rotate

BACK or NEXT to select your favorite track.

D>Press PLAY button to play the programmed tracks, the LCD display of unit will show:

E>press STOP button to stop the program play, press STOP button one more time to erase the programmed tracks :

Notice:

-the former programmed tracks cannot be deposited by unit automatically;

-the max program function is 99 tracks. If you try to enter more than 99 tracks, program will be full and you cannot

continue program function.

-If it is playing a USB, the LCD will display USB.

33

PROGRAM METHOD

(1)Press the [PROG.] key at STOP mode, system will go to PROGRAM mode.

-The PRG icon and P01 will blink at 2Hz. This prompts the user to enter the first song in the program PLAY list.

(2)The user can select the desire tracks by using [NEXT], [BACK] keys.

Once these keys are pressed, the Display will show the selected track.

(3)After select the desired track, press [PROG.] key again and it will be stored in the memory. In Mp3 mode, Maximum 99 and

in CD mode, Maximum 20 tracks can be programmed when repeat steps (2) to (3) procedure.

(4)If press the [STOP] key during the program mode, then the selected TRACKs will be stored in the memory and return to

STOP mode (Continuous Play mode)

(5)If press the [PLAY] key during the program mode, it will start the program PLAY mode. Playback will start from P01 Track.

Erasing a program

You can erase the content of the memory by:

-Pressing the STOP button twice, while playing,

- Opening the CD door,

- Selecting another audio source mode.

MAINTENANCE & SAFETY

Precautions & General Maintenance

*Place the set on a hard and flat surface so that the system does not tilt.

*Do not expose the set, batteries or CDs to humidity, rain, sand or excessive heat caused by heating equipment or direct

sunlight.

*Do not cover the set. Adequate ventilation with a minimum gap of inches between the ventilation

holes and surrounding surfaces is necessary to prevent from heating.

*The mechanical parts of the set contain self-lubricating bearings and must not be oiled or

lubricated.

*To clean the set, use a soft dry cloth. Do not use any cleaning agents containing alcohol,

ammoniac, benzene or abrasives as these may harm the housing.

Care of the cabinet

1.To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.

2.The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning

and wiping the plastic parts.

3.Mild soap and a damp cloth may be used on the front panel.

CD player and CD handling

*The lens of the CD player should never be touched!

*Sudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Playing a CD is

then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture

evaporates.

*Always close the CD door to keep the CD compartment dust-free. To clean, dust the

compartment with a soft dry cloth.

*To clean the CD, wipe in a straight line from the centre towards the edges using a soft

lint-free cloth. Do not use cleaning agents as they may damage the disc.

*Never write on a CD or attach any stickers on it.

34

TROUBLE SHOOTING

If a fault occurs, first check the points listed below before taking the set for repair. Do not open the set as there is a risk

of electric shock. If you are unable to remedy a problem by following these hints, consult your dealer or service center.

WARNING: under no circumstances you should try to repair the set yourself, as this will invalidate the warranty.

PROBLEM

Possible Cause

SOLUTION

- No sound

- No power

 Volume not adjusted

 power cord not securely connected

 battery of the Remote Control is

dead, or badly inserted

- Adjust the volume,

- Connect the AC power cord properly,

- Replace the battery, install new battery

correctly.

Display does not

function properly/ NO

reaction to operation of

any of the controls

 Electrostatic discharge

- Switch off and unplug the set. Reconnect

after a few seconds

No disc indication

 No CD/MP3 inserted, or CD badly

loaded.

 CD badly scratched or dirty.

 CD-R is blank or the disc is not

finalized.

- Insert a CD,MP3,CD-R, or load CD disc

label side facing.

- Replace/clean CD, see Maintenance.

- Use a finalized CD-R.

CD/MP3/USB/SD

playback does not work

 CD/MP3/USB badly scratched /

dirty.

 Laser lens steamed up.

 USB or SD device is not installed or

installed incorrectly.

 Incompatible USB/SD device used.

- Replace/clean CD/MP3/USB (see

maintenance).

- Wait until lens has adjusted to room

temperature.

- Insert USB/SD device into the compatible

slot.

- Playback using any USB/SD device cannot

be guaranteed. Please try another USB/SD

device.

The CD/MP3 skips tracks

 CD/MP3 damaged or dirty.

 Program is active.

- Replace or clean CD/MP3.

- Quit program mode(s).

RADIO

Noise or Sound distorted

 Station is not tuned properly.

 FM wire antenna is not positioned

correctly.

 Station is too weak.

- Adjust tuning control,

- Extend the FM wire antenna fully.

- Try other strong stations.

No sound when playing

audio via Bluetooth

Your bluetooth device has not been

paired properly

Pair your Bluetooth device according to the

“Pairing your Bluetooth Device” section.

The volume of your Bluetooth device is

set at too low.

Increase the volume of your Bluetooth device.

The volume control of your TOKAI

micro system is set too low.

Increase the volume of your TOKAI micro

system, by pressing VOL+ button.

No sound when playing

audio via AUX-IN

Audio cable has not been connected

properly.

Check the connection of Audio cable between

your Micro system and the external audio

device.

Audio cable is damaged.

Use another audio cable for connection.

35

TECHNICAL SPECIFICATIONS

S CARACTERISTIQUES

Model CD-103

Power supply AC 100~240 V, 50/60 Hz

Power consumption 18 W

Standby mode consumption 0.6 W

Output power 40 W (2x20W) = 2x5 W RMS

Operation temperature +5°C - + 35°C

Headphone impedance 4 ~ 32 Ohms

CD section

Optical pick-up 3-Beam Laser

Frequency response 100Hz – 16KHz

Radio Frequency range FM 87.5 ~ 108 MHz

Preset stations up to 30 stations

Connections AUXILARY 3.5MM

USB COMPATIBLE PORT

MMC/SD/SDHC/SDXC memory card reader

EARPHONE 3.5MM

BLUETOOTH A2DP - VERSION 1.2

AVRCP – VERSION 1.0

ACCESSORIES AC Power cord

Remote control (including 1 flat CR-2025 battery)

User Manual

Net weight Unit 0,95 Kg / Speakers 2 x 1,32 Kg

Dimensions unit 480 (L) x 228 (W) x 229 (H) mm

IMPORTANT: Due to continual revision and improvement on our products design, specifications are subject

to change without further notice.

36

END OF LIFE DISPOSAL

We company LEMA SAS hereby states that the unit under reference CD-103, complies with the essential

requirements and other relevant provisions of the Council Directive R&TTE 1999/05/CE. The Declaration of

Conformity is available on request at the website www.tokai.fr (heading: Contact).

This unit complies with European Council Directive 2006 / 95 CE (Electromagnetic

Compatibility & Low Voltage Directives)

Warning! This logo set on the product means that the recycling of this apparatus comes within the

framework of the Directive 2002/96/CE of January 27, 2003 concerning the Waste of Electrical and

Electronic Equipment (WEEE).

This symbol means that used electrical and electronic products should not be mixed with general

household waste. There is a separate collection system for these products.

If you want to dispose of this equipment, please do not use the ordinary dust bin!

- The presence of dangerous substances in the electrical and electronic equipments can have potential

consequences on the environment and human health in the cycle of reprocessing this product.

- Therefore, at the end of its lifetime, this product shall not be disposed with other non-recycled waste. Used

electrical and electronic equipment must be treated separately and in accordance with legislation that

requires proper treatment, recovery and recycling of used electrical and electronic equipment.

- Local authorities and resellers have set special procedures for the purpose of collecting and recycling this

product (please contact your local authority for further details). You have the obligation to use the selective

waste collection systems put in place by your local authority.

- If your used electrical or electronic equipment has batteries or accumulators, please dispose of these

separately beforehand according to local requirements.

- By disposing of this product correctly you will help ensure that the waste undergoes the necessary

treatment, recovery and recycling and thus prevent potential negative effects on the environment and

human health which could otherwise arise due to inappropriate waste handling.

Page is loading ...

41

BESCHRIJVING VAN EENHEID EN BEDIENING

VOORAANZICHT

ACHTERAANZICHT

1. SENSOR AFSTANDSBEDIENING

2. AAN-UIT KNOP (POWER)

3. STANDBY-indicator

4. AFSPELEN/PAUZE-KNOP (PLAY/PAUSE)

5. STOP/USB/SD KNOP

6. LCD DISPLAY

7. TERUG KNOP (BACK)

8. VOLGENDE KNOP (NEXT)

9. VOLUME-KNOP

10. HERHAAL/PROGRAMMA/TIME –KNOP

(REP/PROG/TIME)

11. FUNCTIE-KNOP(FUNCTION)

12. AUX. AANSLUITING (AUX IN)

13. KOPTELEFOONAANSLUITING (PHONES)

14. GEHEUGENKAART-SLOT (SD/MMC)

15. COMPATIBEL USB-POORT (USB)

16. LINKS&RECHTS LUIDSPREKERS

17. FM ANTENNE

18. LUIDSPREKERS DRAADAANSLUITING (L) & (R)

19. CD-VAK OPENEN/SLUITEN-TOETS

20. AC-STROOM INGANG (AC IN)

Page is loading ...

77

DESCRIPCIÓN DEL DISPOSITIVO

Vista de frente

Vista posterior

1. SENSOR DEL MANDO A DISTANCIA

2. BOTÓN DE ENCENDIDO

3. INDICADOR DE ESTADO DE REPOSO

4. BOTÓN DE REPRODUCCIÓN/PAUSA

5. BOTÓN DE STOP/USB/SD

6. PANTALLA LCD

7. BOTÓN ANTERIOR

8. BOTÓN DE SIGUIENTE

9. BOTÓN DE VOLUMEN

10. BOTÓN DE REPETICIÓN/PROG./RELOJ

11. BOTÓN DE FUNCIÓN

12. Terminal AUX IN

13. Conexión AURICULARES

14. Ranura SD/MMC

15. Puerto compatible con USB

16. ALTAVOCES IZQUIERDO Y DERECHO

17. CABLE ANTENA FM

18. TERMINALES DE LOS CABLES DE LOS

ALTAVOCES (I/D)

19. BANDEJA DE CD

20. TOMA DE CORRIENTE AC

Page is loading ...

Tokai CD-103 User manual

Related papers

Other documents