CMA Dishmachines AH Datasheet

Category
Dishwashers
Type
Datasheet

CMA Dishmachines AH is a single rack straight dishwasher made entirely of stainless steel, assuring long life and years of trouble free operation. It features a unique spray arm system with upper and lower stainless steel wash arms with reinforced end caps. Pull-pins allow the wash arms to be easily removed for cleaning. A pump purging system improves results by eliminating soil and chemical carryover during the rinse cycle. Top mounted controls include built-in chemical pumps and a deliming system that ensures proper chemical usage. Auto start/stop makes operation safe and easy.

CMA Dishmachines AH is a single rack straight dishwasher made entirely of stainless steel, assuring long life and years of trouble free operation. It features a unique spray arm system with upper and lower stainless steel wash arms with reinforced end caps. Pull-pins allow the wash arms to be easily removed for cleaning. A pump purging system improves results by eliminating soil and chemical carryover during the rinse cycle. Top mounted controls include built-in chemical pumps and a deliming system that ensures proper chemical usage. Auto start/stop makes operation safe and easy.

Chemical Sanitizing
Single Rack Straight
Dishwasher
AH
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: 714-895-2141 • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
Printed in the U.S.A.
©
2008 CMA, Inc.
U
L
R
LISTED
COMMERCIAL
DISHWASHER
864T
Unique pull-pin design
allows wash arms to be
easily removed for
cleaning.
Built-in Poly Pro
TM
scrap
accumulator.
Top mounted controls
include built-in chemical
pumps and deliming
system that assures
proper chemical usage.
Bowl option available for
capsule dispensed
products.
Pump purging system
improves results by
eliminating soil and
chemical carryover
during rinse cycle.
Optional Temp-Sure
TM
heater assures a
continuous supply of
140
°
F hot water that
guarantees excellent
results.
FEA
TURES:
40 racks / 160 covers per hour.
All stainless steel construction assures long
life and years of trouble free operation.
Unique spray arm system features upper
and lower stainless steel wash arms with
reinforced end caps. Specially designed
pull-pins allow wash arms to be easily
removed for cleaning.
Pump purging system improves results by
eliminating soil and chemical carryover
during rinse cycle.
Top mounted controls include built-in
chemical pumps and deliming system that
assures proper chemical usage.
Auto start/stop makes operation safe and
easy.
Integrated scrap tray prevents food soil from
entering drain system.
Water inlet comes with built-in strainer, pre-
vents debris from clogging the water valve.
Dishmachine comes with 2 dishracks.
Stainless steel impeller offers extended life
and service.
®
CE
F 7"
Summary Specifications: Model AH
CMA Energy Mizer model AH low temperature, chemical sanitizing commercial dishwasher meets NSF, UL and CSA sanitation and
construction standards WITHOUT
the use of BOOSTER or
T
ANK HEATERS. The model AH is constructed entirely of stainless steel.
Each unit automatically washes, rinses and sanitizes food service utensils in standard 19-3/4" x 19-3/4" racks. Unit comes standard
with upper and lower stainless steel wash arms. The model AH incorporates a pump purging system that improves results by elim-
inating soil and chemical carryover during rinse cycle.
Available Options
Solid/Powder Dual Bowl Dispenser
CMA Temp-Sure
TM
(Self contained 12kW heater)
Sanitizer Alarm
Stainless Steel Dishtables
Alternative Cycle Times
Alternative Electrical Available for Export
MODEL AH USA METRIC
OPERATING CAPACITY
RACKS PER HOUR
(NSF RATED) 40 40
OPERATING CYCLE
WASH TIME-SEC 45 45
RINSE TIME-SEC 30 30
DWELL TIME-SEC 15 15
TOTAL CYCLE TIME 90 90
WASH TANK CAPACITY 1.7 GAL. (6.45 L)
PUMP CAPACITY 52 GPM (197 LPM)
OPERATING TEMPERATURE
REQUIRED 120°F (49°C)
RECOMMENDED 140°F (60°C)
W
A
TER CONSUMPTION
PER RACK
1.7 GAL.
(6.45 L)
PER HOUR 74 GPH (280 LPH)
WATER REQUIREMENTS
WATER INLET 3/4" (1.9cm)
DRAIN-I.P.S. 2" (5.1cm)
Specifications:
WASH PUMP MOTORS HP 11
DIMENSIONS
DEPTH 25-3/4" (65.4cm)
WIDTH 25-3/4" (65.4cm)
HEIGHT 56"-57" (142.2cm-144.8cm)
STANDARD
TABLE HEIGHT 34" (86cm)
MAXIMUM CLEARANCE
FOR DISHES 17" (43cm)
STANDARD DISHRACK 1 1
DIMENSIONS 19-3/4"X19-3/4" (50X50cm)
ELECTRICAL RATING VOLTS AMPS
115 16
SHIPPING WEIGHT
APPROXIMA
TE
270# (122.5kg)
USA METRIC
DISHMACHINE 
L
5" Min.
11-1/2" Adj. 12-1/2" Scrap
Tray Drain Facing Floor
6-1/2"
25-3/4"
25-3/4"
10-1/2"
3"
56"
Adj.
57"
74"
TOP VIEW
Counter
Top
34"
Adj.
35"
1-1/2"
Cleanout
FRONT VIEW
RIGHT VIEW
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: 714-895-2141 • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
Printed in the U.S.A.
©
2008 CMA, Inc.
Door Opening 20-1/2"
Chemical Sanitizing
Single Rack Straight
Dishwasher
AH
W
ater Inlet 3"
Off The top
Electrical Hook Up
3" Off The top
8-1/2"
Drain
W
ARNING:
Plumbing connections must be made by a qualified ser
vice company who will comply with all available Federal, State, and Local Health,
Plumbing and Safety codes.
®
  • Page 1 1
  • Page 2 2

CMA Dishmachines AH Datasheet

Category
Dishwashers
Type
Datasheet

CMA Dishmachines AH is a single rack straight dishwasher made entirely of stainless steel, assuring long life and years of trouble free operation. It features a unique spray arm system with upper and lower stainless steel wash arms with reinforced end caps. Pull-pins allow the wash arms to be easily removed for cleaning. A pump purging system improves results by eliminating soil and chemical carryover during the rinse cycle. Top mounted controls include built-in chemical pumps and a deliming system that ensures proper chemical usage. Auto start/stop makes operation safe and easy.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI