WAGO Up/Down Counter Ex i User manual

Brand: WAGO

Model: Up/Down Counter Ex i

Type: User manual

Pos: 2 /Dokumentation allgemein/Einband/Einband Handbuch - Fronts eite 20 15 - mit Doc Var iabl en ( Sta ndar d) @ 9\ mod_1285229289866_0.docx @ 64941 @ @ 1

WAGO-I/O-SYSTEM 750

Manual

750-

633

Up/Down Counter Ex i

Version 1.3.0

HW-Version 03, SW-

Version 01

Pos: 3 /A lle Ser ien ( All ge mein e M odul e)/ Rec htlic h es, A llg emei nes /Im pre ssu m f ür St and ard han dbüc her - al lg. Ang abe n, A nsc hrift en, Telef onnu mmer n und E-Mai l-A dresse n @ 3\mod_1219151118203_21.docx @ 21060 @ @ 1

2 WAGO-I/O-SYSTEM 750

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

WAGO Kontakttechnik GmbH & Co. KG

Hansastraße 27

D-32423 Minden

Phone: +49 (0) 571/8 87 – 0

Fax: +49 (0) 571/8 87 – 1 69

E-Mail: [email protected]

Web: http://www.wago.com

Technical Support

Phone: +49 (0) 571/8 87 – 5 55

Fax: +49 (0) 571/8 87 – 85 55

E-Mail: [email protected]

Every conceivable measure has been taken to ensure the accuracy and

completeness of this documentation. However, as errors can never be fully

excluded, we always appreciate any information or suggestions for improving the

documentation.

E-Mail: [email protected]

We wish to point out that the software and hardware terms as well as the

trademarks of companies used and/or mentioned in the present manual are

generally protected by trademark or patent.

WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH.

=== Ende der Lis te f ür T e xtmar ke Ei nb and _vor ne = ==

WAGO-I/O-SYSTEM 750 Table of Contents 3

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 5 /D ok ument ati on al lg em ein/V erz eic hni sse /Inh alts ver zei chni s - Übersc hrift oG und Ver zeich nis @ 3\mod_1219151230875_21.docx @ 21063 @ @ 1

Table of Contents

1 Notes about this Documentation ................................................................. 5

1.1 Validity of this Documentation ................................................................. 5

1.2 Copyright ................................................................................................... 5

1.3 Symbols ..................................................................................................... 6

1.4 Number Notation ....................................................................................... 8

1.5 Font Conventions ...................................................................................... 8

2 Important Notes ........................................................................................... 9

2.1 Legal Bases ............................................................................................... 9

2.1.1 Subject to Changes ............................................................................... 9

2.1.2 Personnel Qualifications ....................................................................... 9

2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with

Underlying Provisions .......................................................................... 9

2.1.4 Technical Condition of Specified Devices ......................................... 10

2.2 Safety Advice (Precautions) .................................................................... 11

3 Device Description ..................................................................................... 13

3.1 View ........................................................................................................ 15

3.2 Connectors ............................................................................................... 16

3.2.1 Data Contacts/Internal Bus ................................................................. 16

3.2.2 Power Jumper Contacts/Field Supply ................................................ 17

3.2.3 CAGE CLAMP

Connectors ............................................................. 18

3.3 Display Elements .................................................................................... 19

3.4 Operating Elements ................................................................................. 19

3.5 Schematic Diagram ................................................................................. 20

3.6 Technical Data ........................................................................................ 21

3.6.1 Device Data ........................................................................................ 21

3.6.2 Supply ................................................................................................. 21

3.6.3 Communication .................................................................................. 21

3.6.4 Counter ............................................................................................... 22

3.6.5 Inputs .................................................................................................. 22

3.6.6 Outputs ............................................................................................... 22

3.6.7 Explosion Protection Inputs ............................................................... 23

3.6.8 Explosion Protection Outputs ............................................................. 24

3.6.9 Connection Type ................................................................................ 24

3.6.10 Climatic Environmental Conditions ................................................... 25

3.7 Approvals ................................................................................................ 26

3.8 Standards and Guidelines ........................................................................ 28

4 Process Image ............................................................................................. 30

4.1 Operating Mode 1 – Up Counter with Enable Input and Operating

Mode 2 – Up/Down Counter with U/D Input ......................................... 30

4.1.1 Set Counter ......................................................................................... 31

4.1.2 Disable Counter .................................................................................. 31

4.1.3 Set Output ........................................................................................... 31

4.1.4 Example .............................................................................................. 31

4.2 Operating Mode 3 – Frequency Counter ................................................. 33

4 Table of Contents WAGO-I/O-SYSTEM 750

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

4.2.1 Set Measuring Method, Frequency Range and Measured Value

Display ................................................................................................ 34

4.2.2 Set Watchdog Time ............................................................................ 34

4.2.3 Set Output ........................................................................................... 35

4.2.4 Example .............................................................................................. 35

4.3 Operating Mode 4 – Peak-Time Counter ................................................ 36

4.3.1 Set Output ........................................................................................... 36

4.3.2 Example .............................................................................................. 37

5 Mounting ..................................................................................................... 39

5.1 Mounting Sequence ................................................................................. 39

5.2 Inserting and Removing Devices ............................................................ 40

5.2.1 Inserting the I/O Module .................................................................... 40

5.2.2 Removing the I/O Module .................................................................. 41

6 Connect Devices ......................................................................................... 42

6.1 Connecting a Conductor to the CAGE CLAMP

................................... 42

6.2 Power Supply Concept ............................................................................ 43

6.2.1 Power Supply Concept in Marine Applications ................................. 45

6.3 Connection Example ............................................................................... 47

7 Parameterizing ........................................................................................... 48

7.1 Parameterization with WAGO-I/O-CHECK ........................................... 48

7.1.1 Up/Down Counter Ex i 750-633 (Parameter Dialog Box) ................. 48

7.1.1.1 Up/Down Counter Ex i 750-633 Toolbar ...................................... 49

7.1.1.2 Up/Down Counter Ex i 750-633 Parameter ................................... 50

8 Use in Hazardous Environments .............................................................. 51

8.1 Marking Configuration Examples ........................................................... 52

8.1.1 Marking for Europe According to ATEX and IECEx ........................ 52

8.1.2 Marking for America (NEC) and Canada (CEC) ............................... 56

8.2 Installation Regulations ........................................................................... 59

8.2.1 Special Notes Regarding Explosion Protection .................................. 59

8.2.2 Special Notes Regarding ANSI/ISA Ex ............................................. 61

9 Appendix ..................................................................................................... 62

9.1 Rated Surge Voltage ............................................................................... 62

List of Figures ...................................................................................................... 63

List of Tables ........................................................................................................ 64

=== Ende der Lis te f ür T e xtmar ke V erz eic hnis _vor ne == =

WAGO-I/O-SYSTEM 750 Notes about this Documentation 5

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 7 /A lle Ser ien ( All ge mein e M odul e)/ Über sc hrif ten/ Ebe ne 1/Hi nwei s e zu dies er D o kume ntati on - Über schr ift 1 @ 4\mod_1237987661750_21.docx @ 29029 @ 1 @ 1

1 Notes about this Documentation

Pos: 8 /A lle Ser ien ( All ge mein e M odul e)/ Sic her heit s- und sonstige Hinweise/Hinweis/Hinweis: Dokumentation aufbewahren @ 4\mod_1237987339812_21.docx @ 2 902 6 @ @ 1

Always retain this documentation!

This documentation is part of the product. Therefore, retain the documentation

during the entire service life of the product. Pass on the documentation to any

subsequent user. In addition, ensure that any supplement to this documentation is

included, if necessary.

Pos: 9 /A lle Ser ien ( All ge mein e M odul e)/ Über sc hrif ten/ Ebe ne 2/G ültig kei tsb ereic h - Über schr ift 2 @ 12\mod_1338912448776_21.docx @ 96469 @ 2 @ 1

1.1 Validity of this Documentation

Pos: 10 /Serie 750 (WAGO-I/O-SYST EM) /Hi nwei se z ur Do kume nt ati on/G ülti gkei tsb erei ch/G ült ig keit sber ei ch D oku men tati on I /O-Modul 750-xxxx, ohne Variantenangabe @ 14\mod_1358944037947_21.docx @ 109346 @ @ 1

This documentation is only applicable to the I/O module 750-633

(Up/Down Counter Ex i).

Pos: 11 /S eri e 7 50 ( WA GO-I/ O-SYST EM) /Hi n weis e zur D okum ent ati on/Hi nw eise /Ac htu ng: H in weis zur D oku ment ati on I/ O-M odule 75 0-xxxx @ 4\mod_1237986979656_21.docx @ 29023 @ @ 1

The I/O module 750-633 shall only be installed and operated according to the

instructions in this manual and in the manual for the used fieldbus

coupler/controller.

Consider power layout of the WAGO-I/O-SYSTEM 750!

In addition to these operating instructions, you will also need the manual for the

used fieldbus coupler/controller, which can be downloaded at www.wago.com.

There, you can obtain important information including information on electrical

isolation, system power and supply specifications.

Pos: 12.1 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en/ Ebe ne 2/ Ur heb ersc hut z - Ü bersc hr ift 2 @ 23\ mod_1435647042188_21.docx @ 184808 @ 2 @ 1

1.2 Copyright

Pos: 12 .2 /All e Seri en (A llg emei ne M od ule) /R echtl ich es, Allg em ei nes/U rh ebers chu tz ausf ührl ich @ 4\mod_1235565145234_21.docx @ 27691 @ @ 1

This Manual, including all figures and illustrations, is copyright-protected. Any

further use of this Manual by third parties that violate pertinent copyright

provisions is prohibited. Reproduction, translation, electronic and phototechnical

filing/archiving (e.g., photocopying) as well as any amendments require the

written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.

Non-observance will involve the right to assert damage claims.

Pos: 12.3 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

6 Notes about this Documentation WAGO-I/O-SYSTEM 750

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 12.4 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en/ Ebe ne 2/ S ymbol e - Ü ber schr if t 2 @ 13\ mod_1351068042408_21.docx @ 105270 @ 2 @ 1

1.3 Symbols

Pos: 12 .5.1 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- und so nsti ge H in weis e/G efa hr/G efa hr: _War nu ng vor P ers on ensc hä den allg emei n_ - Erl äuter ung @ 13\ mod_1343309450020_21.docx @ 101029 @ @ 1

Personal Injury!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will

result in death or serious injury.

Pos: 12 .5.2 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- und so nsti ge H in weis e/G efa hr/G efa hr: _War nu ng vor Pers onensc häde n durch el ektri schen S trom_ - Erläuterung @ 13\mod_1343309694914_21.docx @ 101030 @ @ 1

Personal Injury Caused by Electric Current!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will

result in death or serious injury.

Pos: 12 .5.3 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- und so nsti ge H in weis e/W arn ung/ War nung : _ War nu ng vor P ers one nsch äde n al lg emei n_ - Erläuterung @ 13\mod_1343309877041_21.docx @ 101035 @ @ 1

Personal Injury!

Indicates a moderate-risk, potentially hazardous situation which, if not avoided,

could result in death or serious injury.

Pos: 12 .5.4 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- und sonsti ge Hin weise/ Vorsic ht/V orsic ht: _War nung vor Pers one nschäd en allg emein _ - Erläut eru ng @ 1 3\mod_1343310028762_21.docx @ 101038 @ @ 1

Personal Injury!

Indicates a low-risk, potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

Pos: 12 .5.5 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- und so nsti ge H in weis e/A chtu ng/ Ach tung : _ War nung v or Sac hsc h äden allg em ein _ - Erläuterung @ 13\mod_1343310134623_21.docx @ 101041 @ @ 1

Damage to Property!

Indicates a potentially hazardous situation which, if not avoided, may result in

damage to property.

Pos: 12 .5.6 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- und sonsti ge Hin weise/ Achtu ng/A chtung : _War nung v or Sachsc häd en durc h elektr ostati sch e Aufla dung_ - Erläut erung @ 13\mod_1343310227702_21.docx @ 101044 @ @ 1

Damage to Property Caused by Electrostatic Discharge (ESD)!

Indicates a potentially hazardous situation which, if not avoided, may result in

damage to property.

Pos: 12 .5.7 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- und sonstige Hinweise/Hinweis/Hinweis: _Wichtiger Hinweis allgemein _ - Erläuterung @ 13\mod_1343310326906_21.docx @ 101047 @ @ 1

Important Note!

Indicates a potential malfunction which, if not avoided, however, will not result in

damage to property.

Pos: 12 .5.8 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- und sons ti ge Hi n weis e/Inf or mati on/I nf orma tio n: _ Wei ter e Inf or mati on allg emei n_ - Erl äuter ung @ 13 \mod_1343310439814_21.docx @ 101051 @ @ 1

WAGO-I/O-SYSTEM 750 Notes about this Documentation 7

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Additional Information:

Refers to additional information which is not an integral part of this

documentation (e.g., the Internet).

Pos: 12.6 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

8 Notes about this Documentation WAGO-I/O-SYSTEM 750

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 12.7 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en/ Ebe ne 2/ Dar st ellu ng der Z ahl ens yst eme - Über sc hrift 2 @ 23\mod_1435647128078_21.docx @ 184811 @ 2 @ 1

1.4 Number Notation

Pos: 12.8 /All e Seri en ( All ge meine Mo dul e)/R ec htli ches , All ge mei nes /Za hlens ys te me @ 3\mod_1221059454015_21.docx @ 21711 @ @ 1

Table 1: Number Notation

Number Code

Example

Note

Decimal

100

Normal notation

Hexadecimal

0x64

C notation

Binary

'100'

'0110.0100'

In quotation marks, nibble separated with

dots (.)

Pos: 12.9 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en/ Ebe ne 2/ Sc hri ftk on venti one n - Ü bersc hri ft 2 @ 23\mod_143564718600 5_21. doc x @ 18481 4 @ 2 @ 1

1.5 Font Conventions

Pos: 12.1 0 / Alle Ser ie n (All ge mein e M odul e) /Re chtl ich es, Allg em ein es/Sc hr ift konv enti onen @ 3\mod_1221059521437_21.docx @ 21714 @ @ 1

Table 2: Font Conventions

Font Type

Indicates

italic

Names of paths and data files are marked in italic-type.

e.g.: C:\Program Files\WAGO Software

Menu items are marked in bold letters.

e.g.: Save

A greater-than sign between two names means the selection of a

menu item from a menu.

e.g.: File > New

Input

Designation of input or optional fields are marked in bold letters,

e.g.: Start of measurement range

“Value”

Input or selective values are marked in inverted commas.

e.g.: Enter the value “4 mA” under Start of measurement range.

[Button]

Pushbuttons in dialog boxes are marked with bold letters in square

brackets.

e.g.: [Input]

[Key]

Keys are marked with bold letters in square brackets.

e.g.: [F5]

Pos: 13 /Doku ment ation all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 9

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 14 /A ll e Ser ien (Al lg emei ne M od ule)/ Üb ers chrif te n/Eb ene 1/Wi cht ige Erl äu ter unge n - Ü bersc hrift 1 @ 4\mod_1241428899156_21.docx @ 32170 @ 1 @ 1

2 Important Notes

Pos: 15.1 /All e Seri en ( All ge meine Mo dul e)/R ec htli ches , All ge mei nes /Wi chtig e Er l äuter ung en - Ei nleit ung @ 3\mod_1221059818031_21.docx @ 21717 @ @ 1

This section includes an overall summary of the most important safety

requirements and notes that are mentioned in each individual section. To protect

your health and prevent damage to devices as well, it is imperative to read and

carefully follow the safety guidelines.

Pos: 15.2 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en/ Ebe ne 2/ Rec htl ic he Gr un dlag en - Über schri ft 2 @ 3\mod_1221060626343_21.docx @ 21726 @ 2 @ 1

2.1 Legal Bases

Pos: 15.3 /All e Seri en ( All ge meine Mo dul e)/R ec htli ches , All ge mei nes /Änd er ungs vor beh alt - Über schr ift 3 und In halt @ 3\mod_1221060036484_21.docx @ 21720 @ 3 @ 1

2.1.1 Subject to Changes

WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any

alterations or modifications. WAGO Kontakttechnik GmbH & Co. KG owns all

rights arising from the granting of patents or from the legal protection of utility

patents. Third-party products are always mentioned without any reference to

patent rights. Thus, the existence of such rights cannot be excluded.

Pos: 15.4 /Serie 750 (WAGO-I/O-SYST EM)/ Wic htige Erl äuter unge n/Pers onalq uali fikati on/Per sonal qual ifik ation 7 50-xxxx - Ü bers chri ft 3 un d In halt @ 3\mod_1224061208046_21.docx @ 24063 @ 3 @ 1

2.1.2 Personnel Qualifications

All sequences implemented on WAGO-I/O-SYSTEM 750 devices may only be

carried out by electrical specialists with sufficient knowledge in automation. The

specialists must be familiar with the current norms and guidelines for the devices

and automated environments.

All changes to the coupler or controller should always be carried out by qualified

personnel with sufficient skills in PLC programming.

Pos: 15.5 /Serie 750 (WAGO-I/O-SYST EM)/ Wic htige Erl äuter unge n/Bes timmu ngsg emäße V erwe ndung/ Besti mmung sgemäße Verwendung 750-xxxx - Übers chri ft 3 und Inh alt @ 3\mod_1224064151234_21.docx @ 24070 @ 3 @ 1

2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with

Underlying Provisions

Fieldbus couplers, fieldbus controllers and I/O modules found in the modular

WAGO-I/O-SYSTEM 750 receive digital and analog signals from sensors and

transmit them to actuators or higher-level control systems. Using programmable

controllers, the signals can also be (pre-) processed.

The devices have been developed for use in an environment that meets the IP20

protection class criteria. Protection against finger injury and solid impurities up to

12.5 mm diameter is assured; protection against water damage is not ensured.

Unless otherwise specified, operation of the devices in wet and dusty

environments is prohibited.

Operating the WAGO-I/O-SYSTEM 750 devices in home applications without

further measures is only permitted if they meet the emission limits (emissions of

interference) according to EN 61000-6-3. You will find the relevant information

in the section “Device Description” > “Standards and Guidelines” in the manual

for the used fieldbus coupler/controller.

Appropriate housing (per 2014/34/EU) is required when operating the WAGO-

I/O-SYSTEM 750 in hazardous environments. Please note that a prototype test

10 Important Notes WAGO-I/O-SYSTEM 750

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

certificate must be obtained that confirms the correct installation of the system in

a housing or switch cabinet.

Pos: 15.6 /All e Seri en ( All ge meine Mo dul e)/R ec htli ches , All ge mei nes /Te chni sc her Z us tand der Ger ät e - Ü bersc hri ft 3 und Inh alt @ 3\ mod_1221060446109_21.docx @ 21723 @ 3 @ 1

2.1.4 Technical Condition of Specified Devices

The devices to be supplied ex works are equipped with hardware and software

configurations, which meet the individual application requirements. WAGO

Kontakttechnik GmbH & Co. KG will be exempted from any liability in case of

changes in hardware or software as well as to non-compliant usage of devices.

Please send your request for modified and new hardware or software

configurations directly to WAGO Kontakttechnik GmbH & Co. KG.

Pos: 15.7 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 11

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 15.8 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en/ Ebe ne 2/ Sic her hei tshi n weise - Üb ersc hrift 2 @ 6\ mod_1260180299987_21.doc x @ 4 672 4 @ 2 @ 1

2.2 Safety Advice (Precautions)

Pos: 15.9 /All e Seri en ( All ge meine Mo dul e)/ Sich erh eits- und s onsti ge H in weis e/Ei nl eit ung Sich erh eits hin weis e H ard ware @ 6\mod_1260180170493_21.docx @ 46720 @ @ 1

For installing and operating purposes of the relevant device to your system the

following safety precautions shall be observed:

Pos: 15.1 0. 1 /Al le S eri en ( Allg em ein e Mo dul e)/Si ch erh eits- und s o nstig e H inw eise /G efa hr/G efahr : N ich t an G erät en unter S pann ung ar beite n! @ 6\ mod_1260180365327_21.docx @ 46727 @ @ 1

Do not work on devices while energized!

All power sources to the device shall be switched off prior to performing any

installation, repair or maintenance work.

Pos: 15.1 0. 2 /S erie 750 ( W AGO -I/O-SY ST EM) /Wic htig e Er l äuter ung en /Sic her hei ts- un d s onsti ge H in wei se/G ef ahr/ Gefa hr: Ei nbau 07 50-x xxx nur i n Gehäus en, Sc hrän ken oder el ektri sche n Betri ebsrä umen! @ 6\mod_1260180556692_21.docx @ 46731 @ @ 1

Install the device only in appropriate housings, cabinets or in electrical

operation rooms!

The WAGO-I/O-SYSTEM 750 and its components are an open system. As such,

install the system and its components exclusively in appropriate housings,

cabinets or in electrical operation rooms. Allow access to such equipment and

fixtures to authorized, qualified staff only by means of specific keys or tools.

Pos: 15.1 0. 3 /Al le S eri en ( Allg em ein e Mo dul e)/Si ch erh eits- und s o nstig e H inw eise /G efa hr/G efahr : U nfal l verh ütung s vorsc hri ft en b each ten! @ 6\mod_1260180657000_21.docx @ 46735 @ @ 1

Pos: 15 .10. 4 /Alle S eri en ( Allg em ein e Mo dul e)/Si ch erh eits- und s o nstig e H inw eise /G efa hr/G efahr : A uf nor mger ec hte n Ansc hl uss ac hten! @ 6\mod_1260180753479_21.docx @ 46739 @ @ 1

Pos: 15.1 1. 1 /Al le S eri en ( Allg em ein e Mo dul e)/Si ch erh eits- und sonstige Hinweise/Achtung/Achtung: D efekt e oder bes chädig te Ger äte aus tausc hen! @ 6\mod_1260180857358_21.docx @ 46743 @ @ 1

Replace defective or damaged devices!

Replace defective or damaged device/module (e.g., in the event of deformed

contacts), since the long-term functionality of device/module involved can no

longer be ensured.

Pos: 15.1 1. 2 /Al le S eri en ( Allg em ein e Mo dul e)/Si ch erh eits- und s o nstig e H inw eise /A chtu ng/A cht ung : G erät e vor kriec hen den und isol i ere nden Sto ffen sc hütz en! @ 6\ mod_1260181036216_21.docx @ 46747 @ @ 1

Protect the components against materials having seeping and insulating

properties!

The components are not resistant to materials having seeping and insulating

properties such as: aerosols, silicones and triglycerides (found in some hand

creams). If you cannot exclude that such materials will appear in the component

environment, then install the components in an enclosure being resistant to the

above-mentioned materials. Clean tools and materials are imperative for handling

devices/modules.

Pos: 15 .11. 3 /Al le S eri en ( Allg em ein e Mo dul e)/Si ch erh eits- und s o nstig e H inw eise /A chtu ng/A cht ung : R einig ung nur mi t zul äs sig en M at erial ien! @ 6\mod_1260181203293_21.docx @ 46751 @ @ 1

Clean only with permitted materials!

Clean soiled contacts using oil-free compressed air or with ethyl alcohol and

leather cloths.

Pos: 15.1 1. 4 /Al le S eri en ( Allg em ein e Mo dul e)/Si ch erh eits- und sonstige Hinweise/Achtung/Achtung: Kein Kontaktspray verwenden! @ 6\mod_1260181290808_21.docx @ 46755 @ @ 1

12 Important Notes WAGO-I/O-SYSTEM 750

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Do not use any contact spray!

Do not use any contact spray. The spray may impair contact area functionality in

connection with contamination.

Pos: 15.1 1. 5 /Al le S eri en ( Allg em ein e Mo dul e)/Si ch erh eits- und s o nstig e H inw eise /A chtu ng/A cht ung : V erpol ung en der Dat en- und V ersorgungsleitungen vermeiden! @ 6\mod_1260184045744_21.docx @ 46767 @ @ 1

Do not reverse the polarity of connection lines!

Avoid reverse polarity of data and power supply lines, as this may damage the

devices involved.

Pos: 15.1 1. 6 /Al le S eri en ( Allg em ein e Mo dul e)/Si ch erh eits- und s o nstig e H inw eise /A chtu ng/A cht ung : El ektr ost atis ch e En tla dung v ermei de n! @ 6\mod_1260181364729_21.docx @ 46759 @ @ 1

Avoid electrostatic discharge!

The devices are equipped with electronic components that may be destroyed by

electrostatic discharge when touched. Please observe the safety precautions

against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the

devices, please ensure that environmental factors (personnel, work space and

packaging) are properly grounded.

Pos: 16 /Doku ment ation all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 13

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 17 /A ll e Ser ien (Al lg emei ne M od ule)/ Üb ers chrif te n/Eb ene 1/G erät e besc hrei bung - Ü ber schri ft 1 @ 3\mod_1233756084656_21.docx @ 27 096 @ 1 @ 1

3 Device Description

Pos: 18.1 .1 /Ser ie 7 50 ( WAG O-I/ O-SYSTEM)/Gerätebeschreibung/Einleitung/Anwendung/SO/Anwendung 750-0633 @ 11 \mod_1315486144478_21.docx @ 78978 @ @ 1

The counter module 750-633 (Up/Down Counter Ex i) receives the binary signals

from Namur sensors operating in hazardous environments of Zones 0 and 1.

The counter module supports 4 operation modes:

- Operation mode 1: Up-counter with enable input

- Operation mode 2: Up/down counter

- Operation mode 3: Frequency counter with enable input

- Operation mode 4: Peek time counter

The operation mode can be selected via the configuration and commissioning tool

WAGO-I/O-CHECK.

Pos: 18.1 .2 /Ser ie 7 50 ( WAG O-I/ O-SYSTEM)/Wichtige Erläuterungen/Sicherheits- und sons tige Hi nwei s e/War nung / Warn ung: E x i I nst allati o n des WA GO-I/ O-SY STEM 7 50 nur in Zone 2 oder im nicht -ex-Bereic h @ 5\mod_1245851655116_21.docx @ 35947 @ @ 1

Installation only in zone 2 or in non-hazardous environments!

The installation of the WAGO-I/O-SYSTEM 750 fieldbus couplers/controllers

and I/O modules is only to be done in zone 2 or in non-hazardous environments.

Pos: 18.1 .3 /Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G eräte bes chr eibu ng/Ei nlei tu ng/I/ O-B esc hreibu ng/SO/ I/O-Bes chr eibung 750-0633 @ 11\mod_1315486215262_21.docx @ 78981 @ @ 1

The counter is capable of counting binary pulses at the CLK input (clock).

Counting is edge-triggered, i.e. if clock signal changes from I < 1.2 mA to

I > 2.1 mA, the counter value will be incremented.

Using the operation modes “Counter with Enable Input” the U/D(GATE) input

enables counting. If the input is set (I > 2.1 mA), counting is enabled, if the input

is reset (I < 1.2 mA), counting is disabled.

Using operation mode “Up/Down Counter” the U/D(GATE) input determines the

counting direction. If the input is set (I > 2.1 mA), the counter counts up, if the

input is reset (I < 1.2 mA), the counter counts down. The counter can be set or

reset with the control byte.

The digital output DO is activated directly via the control byte or depending on a

pre-defined the counter value. The output is short-circuit-protected.

Pos: 18.1 .4 /Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G eräte bes chr eibu ng/Ei nlei tu ng/I/ O-B esc hrei bung /All ge mein /V er weis a uf Kapi tel "A nschl üsse" @ 8\ mod_1276775378035_21.docx @ 57956 @ @ 1

The assignment of the connections is described in the “Connectors” section.

Pos: 18.1 .5 /Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G eräte bes chr eibu ng/Ei nlei tu ng/I/ O-B esc hrei bung /All ge mein /V er weis a uf Kapi tel " G erät e an schl ieß en" > " Ansc hl ussb eis piel (e) " @ 5\mod_1246015203281_21.docx @ 36298 @ @ 1

Connection examples are shown in section “Connect Devices” > … >

“Connection Example(s)”.

Pos: 18.1 .6 /Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G eräte bes chr eibu ng/Ei nlei tu ng/L ED-Anzeige/LED Zustand Eingänge U/D/Gate, CLK und Ausgang DO @ 11\mod_1315483866345_21.docx @ 78960 @ @ 1

Three green status-LED indicate the status of the inputs U/D(GATE) and CLK

and of the digital output DO.

Pos: 18.1 .7 /Ser ie 7 50 ( WAG O-I/ O-SYST EM) /Gerä teb esc hrei bung /Ei nlei tung /LED -Anz eig e/LED F ehl er K urzs chl uss /Dr aht bruc h Ei ng äng e U/D /G ate, C L K @ 11\mod_1315484211229_21.docx @ 78964 @ @ 1

Two red error-LED indicate a short circuit or a wire break at the inputs U/D(Gate)

and CLK.

Pos: 18 .1.8 /S erie 750 (WAGO-I/O-SYST EM) /Ger äte besc hrei bung /Ei nlei tung /LED -Anz eige/ Ver weis auf Kapit el "Anzei geel emen te" @ 5\mod_1246010525000_21.docx @ 36194 @ @ 1

The meaning of the LEDs is described in the “Display Elements” section.

Pos: 18.1 .9 /Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G erä teb esc hrei bung /Ei nlei tu ng/V ersor g ung/ Vers org ung 24 V, 0 V über Leis tu ngs kon tak te E x i @ 4\mod_1242218496140_21.docx @ 33110 @ @ 1

The Ex i I/O module receives the 24 V voltage supply for the field level from an

upstream Ex i I/O module or from an Ex i power supply module via the power

14 Device Description WAGO-I/O-SYSTEM 750

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

contacts used as blade contacts. It then provides this potential to subsequent I/O

modules via the power contacts used as spring contacts.

Pos: 18.1 .1 0 /S erie 750 ( W AGO -I/O-SY ST EM)/ Gerät ebe schr eib ung/ Einl eit ung/ Ver sorg ung /Gal v anisc he T ren nung F eld/ Sys tem @ 3\ mod_1233756478750_21.docx @ 27102 @ @ 1

The field voltage and the system voltage are electrically isolated from each other.

Pos: 18.1 .1 1 /S erie 750 ( W AGO -I/O-SY ST EM)/ Gerät ebe schr eib ung/ Einl eit ung/ Ver sorg ung /An ordnung in Ex i-Segm ent beli ebig @ 4\ mod_1241506600203_21.docx @ 32297 @ @ 1

Any configuration of the I/O module is possible within an intrinsically safe

segment when configuring the fieldbus node. An arrangement in groups within the

group of potentials is not necessary.

Pos: 18.1 .1 2 /S erie 750 ( W AGO -I/O-SY STEM )/Ger ätebe schr eibung /Einl eitung /Ein satzb ereic h/Ein satzb ereic h 750- xxxx all e Ko ppler /C ontr oll er o hne Ec ono my-Ko ppler @ 3\mod_1232541867468_21.docx @ 26525 @ @ 1

The I/O module 750-633 can be used with all fieldbus couplers/controllers of the

WAGO-I/O-SYSTEM 750 (except for the economy types 750-320, -323, -324

and -327).

Pos: 18.2 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 15

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 18.3 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en/ Ebe ne 2/ A nsich t - Ü bers chr ift 2 @ 4\mod_1240984217343_21.docx @ 31958 @ 2 @ 1

3.1 View

Pos: 18.4 /Serie 750 (WAGO-I/O-SYST EM)/ Ger ätebesc hrei bung/A nsic ht/S onder klemm en/Ans icht 75 0-0633 - Abb. @ 10 \mod_1314618398247_21.docx @ 77440 @ @ 1

Figure 1: View

Pos: 18.5 /Serie 750 (WAGO-I/O-SYST EM)/ Ger äteb esc hrei bung /Ans ic ht/A nsi cht C ag eCl amp® _ Lege nde mit LEDs , mit 1 E ntrieg el ung slas ch e @ 1 5\mod_1370867188922_21.docx @ 122225 @ @ 1

Table 3: Legend for Figure “View”

Pos.

Description

Details See Section

Marking possibility with Mini-

WSB

---

Status LEDs

“Device Description” > “Display Elements”

Data contacts

“Device Description” > “Connectors”

CAGE CLAMP

connectors

“Device Description” > “Connectors”

Power jumper contacts

“Device Description” > “Connectors”

Release tab

“Mounting” > “Inserting and Removing

Devices”

Pos: 18.6 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

16 Device Description WAGO-I/O-SYSTEM 750

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 18.7 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en/ Ebe ne 2/ A nsc hlüss e - Ü ber schr ift 2 @ 4 \mod_1240984262656_21.docx @ 31961 @ 2 @ 1

3.2 Connectors

Pos: 18.8 /Serie 750 (WAGO-I/O-SYST EM) /Ger äte besc hrei bu ng/A nsc hlüss e/D ate nkon takt e/Kl em menbus - Ü bersc hrift 3 @ 6\ mod_1256294684083_21.docx @ 43660 @ 3 @ 1

3.2.1 Data Contacts/Internal Bus

Pos: 18.9.1 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/Datenkontakte - Feld bus kop pler/- con troll er , Ab bil dung u nd B esc hrei bung @ 3\ mod_1231771259187_21.docx @ 26002 @ @ 1

Communication between the fieldbus coupler/controller and the I/O modules as

well as the system supply of the I/O modules is carried out via the internal bus. It

is comprised of 6 data contacts, which are available as self-cleaning gold spring

contacts.

Figure 2: Data Contacts

Pos: 18.9 .2 /Ser ie 7 50 ( WAG O-I/ O-SYSTEM)/Wichtige Erläuterungen/Sicherheits- und sons tige Hi nwei s e/Ach tu ng/A cht ung : Bus kle mm en ni cht auf Gol df eder kon tak te l eg en! @ 7\mod_1266318463636_21.docx @ 50695 @ @ 1

Do not place the I/O modules on the gold spring contacts!

Do not place the I/O modules on the gold spring contacts in order to avoid soiling

or scratching!

Pos: 18.9 .3 /Ser ie 7 50 ( WAG O-I/ O-SYST EM)/ Wichtig e Erläut erungen/Sicherheits- und sonstige Hinweise/Achtung/Achtung: ESD - Auf g ute Erd ung der U mgeb ung acht en! @ 7\mod_1266318538667_21.docx @ 50708 @ @ 1

Ensure that the environment is well grounded!

The devices are equipped with electronic components that may be destroyed by

electrostatic discharge. When handling the devices, ensure that the environment

(persons, workplace and packing) is well grounded. Avoid touching conductive

components, e.g. data contacts.

Pos: 18.1 0 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enwec hs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 17

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 18.1 1 / Ser ie 7 50 ( WAG O-I/ O-SYST EM) /Ger äte besc hrei bu ng/A nsc hlüss e/L eist ungs ko ntakt e/F eldv ers orgung - Ü bers chri ft 3 @ 6\mod_1256294692864_21.docx @ 43664 @ 3 @ 1

3.2.2 Power Jumper Contacts/Field Supply

Pos: 18.1 2. 1 /S erie 750 ( W AGO -I/O-SY ST EM) /Wic htig e Er l äuter ung en /Sic her hei ts- un d s onsti ge H in wei se/V ors ich t/V orsic ht: Ver let zu ngsg efa hr d urc h sc har fka ntige Mes ser kon ta kte! @ 6\mod_1256193279401_21.docx @ 43414 @ @ 1

Risk of injury due to sharp-edged blade contacts!

The blade contacts are sharp-edged. Handle the I/O module carefully to prevent

injury.

Pos: 18.1 2. 2 /S erie 750 ( W AGO -I/O-SY ST EM) /Ger äte bes chr eib ung/ Ans chl üss e/L eist ungs kon tak te 2 LK ( M esser /Fe der ) - Ei nlei tu ng @ 15\ mod_1371721641099_21.docx @ 123714 @ @ 1

The I/O module 750-633 has 2 self-cleaning power jumper contacts that supply

and transmit power for the field side. The contacts on the left side of the I/O

module are designed as blade contacts and those on the right side as spring

contacts.

Pos: 18.1 2. 3 /S erie 750 ( W AGO -I/O-SY ST EM) /Ger äte bes chr eib ung/ Ans chl üss e/L eist ungs kon tak te 2 LK ( M esser /Fe der ) - Abbildung, doppelte Breite @ 15\mod_1371721756578_21.docx @ 123718 @ @ 1

Figure 3: Power Jumper Contacts

Pos: 18.1 2. 4 /S erie 750 ( W AGO -I/O-SY ST EM) /Ger äte bes chr eib ung/ Ans chl üss e/L eist ungs kon tak te 2 LK ( M esser /Fe der ) - Legende @ 15\mod_1371721352500_21.docx @ 123710 @ @ 1

Table 4: Legend for Figure “Power Jumper Contacts”

Contact

Type

Function

Spring contact

Potential transmission (U

) for field supply

Spring contact

Potential transmission (0 V) for field supply

Blade contact

Potential feed-in (0 V) for field supply

Blade contact

Potential feed-in (U

) for field supply

Pos: 18.1 2. 5 /S erie 750 ( W AGO -I/O-SY ST EM) /Wic htig e Er l äuter ung en /Sic her hei ts- un d s onsti ge H in wei se/H in weis /Hi nwei s: M axi mal er St ro m E x i E ins peis ung 75 0-06xx 1,0 A @ 7\mod_1274358256668_21.docx @ 56898 @ @ 1

Do not exceed maximum current via power contacts!

The maximum current available from the 750-606 or 750-625/000-001 Ex-i

Supply Module is 1 A.

When configuring the system, ensure that this current is not exceeded.

If exceeded, an additional potential feed module must be used.

Pos: 18.1 3 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

18 Device Description WAGO-I/O-SYSTEM 750

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 18.1 4 / Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G erät ebe schr eib ung /A nsc hlüss e/C AGE C L AMP-A nschlüsse - Ü bersc hrift 3 @ 6\mod_1256296337770_21.docx @ 43674 @ 3 @ 1

3.2.3 CAGE CLAMP

Connectors

Pos: 18.1 5 / Ser ie 7 50 ( WAG O-I/ O-SYST EM )/G erät ebe schr eib ung /A nsc hlüss e/S ond erkl em men/ Ans chl üss e CC 75 0-063 3 @ 10\mod_1314618802781_21.docx @ 77444 @ @ 1

Figure 4: CAGE CLAMP

Connectors

Table 5: Legend for Figure “CAGE CLAMP

Connectors”

Designation

Connector

Function

U/D 1

In mode 2:

Direction input Up/Down

In mode 1 and 3:

Enable input Gate

In mode 4:

Gate input

0 V

3+7+8

Field supply 0 V

Digital output 24 V

CLK

Clock input

Pos: 18.1 6 / Ser ie 7 50 ( WAG O-I/ O-SYST EM )/ Wichti g e Erl äuter ung en /Sic her hei ts- und s ons tige Hi nwei se /Hin wei s/Hi n weis: Gesc hir mt e Sig nal lei tung en f ür C LK un d U/D (G ATE) v erwe nde n! @ 12 \mod_1340256527042_21.docx @ 98164 @ @ 1

Use shielded signal lines!

Only use shielded signal lines for CLK and U/D (GATE) inputs. Only then can

you ensure that the specified accuracy and interference immunity can be achieved

even in the presence of interference acting on the signal cable.

Pos: 18.1 7 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 19

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 18 .18 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften /Eb ene 2/ Anzei ge ele ment e - Ü bersc hrift 2 @ 4\ mod_1240984390875_21.docx @ 31964 @ 2 @ 1

3.3 Display Elements

Pos: 18.1 9 / Ser ie 7 50 ( WAG O-I/ O-SYST EM) /Ger äte besc hrei bu ng/A nzeig eel eme nte/ Son der kle mmen/ Anzei ge elem ent e 750-0633 @ 10\mod_1314620083861_21.docx @ 77450 @ @ 1

Figure 5: Display Elements

Table 6: Legend for Figure “Display Elements”

LED

Designation

State

Function

State

U/D (GATE)

Off

No active signal at input U/D

(GATE)

Green

Active signal at input U/D (GATE)

Error

U/D (GATE)

Off

No error at input U/D (GATE) or

diagnostics not active

Red

Error at input U/D (GATE)

short circuit or wire break

State

Off

Output not active (0 V)

Green

Output active (+24 V)

State

CLK

Off

No active signal at input CLK

Green

Active signal at input CLK

Error

CLK

Off

No error at input CLK or diagnostics

not active

Red

Error at input CLK

short circuit or wire break

Pos: 18.2 0 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften /Eb ene 2/ Bedie nel em ente - Üb ersc hrift 2 @ 4\ mod_1239191655456_21.docx @ 30439 @ 2 @ 1

3.4 Operating Elements

Pos: 18 .21 /S eri e 7 50 ( WAG O-I/ O-SYST EM) /G erät ebe schr eib ung /Bedi en el eme nte/ Bedi en elem ente I/ O-Modul 75x-xxxx nicht vor hande n @ 4\mod_1236322031125_21.docx @ 28063 @ @ 1

The I/O module 750-633 has no operating elements.

Pos: 18.2 2 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

20 Device Description WAGO-I/O-SYSTEM 750

750-633 Up/Down Counter Ex i

Manual

Version 1.3.0 HW-Version 03, SW-Version 01

Pos: 18.2 3 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften /Eb ene 2/ Sche mati sc hes S ch alt bild - Ü b erschr if t 2 @ 4 \mod_1240984441312_21.docx @ 31967 @ 2 @ 1

3.5 Schematic Diagram

Pos: 18.2 4 / Ser ie 7 50 ( WAG O-I/ O-SYST EM)/ Gerät ebesc hreib ung/ Schem atisc he Schal tbild er/S onder klemm en/Sc hem atische s Schal tbil d 750-0633 @ 10\mod_1314620807208_21.docx @ 77454 @ @ 1

Figure 6: Schematic Diagram

Pos: 18.2 5 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

Page is loading ...