7
English
Pairing
With the headset and phone in close proximity:
Step 1: When the headset is off, press and hold the multifunction button
until the headset indicator turns on permanently.
Step 2: Perform a device discovery (or scan) from the phone. For details
about device discovery consult your phone’s user guide.
Step 3: Select the Motorola HS805 in the list of discovered devices and confirm
by following the on-screen prompts.
Step 4: When requested by the phone, enter the passkey 0000 and confirm.
The device ID is now stored in the phone’s memory. Pairing is successful
when the headset indicator flashes rapidly.
Paired link to additional devices
Your headset can store pairing information for up to 8 different devices equipped
with Bluetooth wireless technology. Devices are stored in a “Paired Device
List” in memory in chronological order. When an attempt to pair to more than
8 devices is made, the oldest paired device is removed from the list.
The headset will automatically initiate a connection with the last device it
was connected to either by powering up the headset or by pressing the
multifunction button. If you want to connect the headset to another device in
the paired device list, you must initiate the connection from that device.
Whichever of the 8 devices initiates a connection to the headset
afterwards, that device then becomes the “last connected” device.
Placing and receiving calls
You can use the phone as usual to dial a number.
Your headset supports both Hands Free and Headset Profiles. Accessing call
functions depend on which profile your phone supports.
Note: some phones do not support all features listed. See your phone user'
guide.