Ohlins FGKT1393/94 Mounting Instruction

Hello! I am an AI chatbot trained to assist you with the Ohlins FGKT1393/94 Mounting Instruction. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Öhlins Front Fork Kit for KTM SX / SX-F models

FGKT 1393/1394

Application Speciﬁc Mounting Instructions

Issued 2012-08-22

Kit Contents (application speciﬁc)

Recommended Tools (application speciﬁc)

Hydraulic Stop Cup

Set-Up Data

Spring Recommendation

Part No. Pcs.

Front Fork kit FGKT1393/1394 1

Base plug (with o-rings) 15430-01 2

Spacer 2 mm 15443-02 14

Hydraulic Stop Cup N/A N/A

Spring Support washer N/A N/A

OEM Fork Cap Tool 50 mm, hexagon

Socket for OEM Base Plug 19 mm

Socket for Öhlins Base Plug 20 mm

FGKT 1393/1394 Cartridge kit uses STD/OEM Hydraulic stop

cup.

Rebound Damping 15 clicks

Compression Damping 15 clicks

Spring Preload 0 mm

(with spring length 467mm, 2pcs of plastic washers in each leg

will equal 0mm preload)

Fluid Volume (each leg) 0,360 litre

Cartridge Kit FGKT1393/1394 shall be used together with

Öhlins Front Fork Springs part no. 08765-xx. For rate

recommendations, see Owner’s Manual/ General Mounting

Instructions.

Note!

The fork springs need to be ordered separately depending on the

rider’s choice of spring rate.

Part No. Pcs.

Circlip 15440-01 2

Öhlins Sticker 00192-01 2

TTX Cartridge Sticker 00191-40 2

Owners Manual 07296-90 1

Spring preload range -2 to 8 mm

(can be adjusted by adding/removing washers 15443-02)

Fluid volume range (each leg) 0,300 - 0,400 litre

Öhlins Front Fork uid 01309-01