AV Access HDEX60-DM User manual

Type
User manual

AV Access HDEX60-DM is a dual HDMI KVM extender kit that allows you to transmit dual HDMI signals up to 1080P@60Hz 4:4:4 8bit to two HDMI displays via a single Cat 5e/6/6a/7 cable. It supports one-way PoC, so only one power adapter is needed to be connected to the receiver to power both units. With one USB host port in the transmitter and four USB 2.0 device ports in the receiver, the kit also supports USB 2.0 pass-through, including two ports with 5V/1A current output for high-power USB devices like cameras or hard disks.

AV Access HDEX60-DM is a dual HDMI KVM extender kit that allows you to transmit dual HDMI signals up to 1080P@60Hz 4:4:4 8bit to two HDMI displays via a single Cat 5e/6/6a/7 cable. It supports one-way PoC, so only one power adapter is needed to be connected to the receiver to power both units. With one USB host port in the transmitter and four USB 2.0 device ports in the receiver, the kit also supports USB 2.0 pass-through, including two ports with 5V/1A current output for high-power USB devices like cameras or hard disks.

HDEX60-DM
1080P Dual HDMI KVM Extender with USB2.0
User Manual
Disclaimers
The information in this manual has been carefully checked and is believed to be
accurate. AV Access Technology Limited assumes no responsibility for any
infringements of patents or other rights of third parties which may result from its
use.
AV Access Technology Limited assumes no responsibility for any inaccuracies that
may be contained in this document. AV Access Technology Limited also makes no
commitment to update or to keep current the information contained in this
document.
AV Access Technology Limited reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright
Copy, Reproduce, Distribute and/or Edit of this document or part of it as well as
utilization of its contents and communication thereof to others without express
authorization are prohibited. Offenders will be held liable for payment of damages.
All rights created by patent grant or registration of a utility model or design patent
are reserved. Copyright ©2022 AV Access Technology Limited All rights reserved.
Trademarks Notice
All products or service names mentioned in this document may be trademarks of
the companies with which they are associated.
Contact Us
Important Safety Instructions
Do not expose this device to rain, moisture, dripping or splashing. No objects
filled with liquids, such as vases, shall be placed on the device.
Do not install or place this unit in a bookcase, built-in cabinet, or in another
confined space. Ensure the unit is well ventilated.
To prevent risk of electric shock or fire hazard due to overheating, do not
obstruct the unit’s ventilation openings with newspapers, tablecloths,
curtains, or similar items.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other device (including amplifiers) that produce heat.
Do not place sources of naked flames, such as lighted candles, on the unit.
Clean this device only with dry cloth.
Unplug this device during lightning storms or when unused for long periods
of time.
Protect the power cord from being walked on or pinched, particularly at
plugs.
Only use attachments / accessories specified by the manufacturer.
Refer all servicing to qualified service personnel.
www.avaccess.com
1
info@avaccess.com
Table of Contents
Introduction .......................................................................................................... 2
Overview .................................................................................................................................. 2
Features .................................................................................................................................... 2
Package Contents .................................................................................................................. 2
Panel .......................................................................................................................................... 3
Installation and Application ................................................................................ 4
Brackets Installation .............................................................................................................. 4
Application .............................................................................................................................. 5
Specifications ....................................................................................................... 6
Trouble Shooting .................................................................................................. 7
Warranty ............................................................................................................... 8
Introduction
www.avaccess.com
2
info@avaccess.com
Introduction
Overview
This product is a 60m dual HDMI KVM extender kit. The kit supports visual lossless
compression function, and it can transmit dual HDMI signals up to 1080P@60Hz
4:4:4 8bit to two HDMI displays via a single Cat 5e/6/6a/7 cable. With one USB host
port in transmitter and four USB 2.0 device ports in receiver, the kit also supports
USB 2.0 pass-through. Two of the USB device ports support 5V/1A current output,
which can be used with high-power USB devices, such as USB camera or USB hard
disk. One-way PoC, integrates power into the Cat 5e/6/6a/7 cable, only one power
adapter is needed to be connected to the receiver to power both units.
Features
Transmits dual 1080P HDMI signal along with USB 2.0 up to 60m/197ft over a
single Cat 5e/6/6a/7 cable.
Visually lossless video quality, supports 1080p@60Hz 4:4:4 8bit and HDCP
1.4.
Supports USB 2.0 ports with full bandwidth up to 480Mbps.
Two of the USB device ports support 5V/1A higher current output, which
can be used with high-power USB devices, such as USB camera or USB hard
disk.
Supports one-way PoC, one power adapter is needed to be connected to
the receiver to power both units
Plug and play, no driver needed.
Package Contents
Transmitter x 1
Receiver x1
DC 12V Power Adapter (with US, UK and EU Pins) x 1
USB 2.0 type-A to type-B Cable x 1
Mounting Brackets (with Screws) x 4
User Manual x 1
Introduction
www.avaccess.com
3
info@avaccess.com
Panel
Transmitter
1 2 3 54 6 7 5
No.
Name
Description
1 Status LED On: HDMI data is being transmitted.
Off: No signal.
2
UTP Out
Connect to UTP In port of the receiver.
3 DC 12V
Connect to the provided power adapter. With one-way PoC
supported, one power adapter is needed to be connected to
the receiver to power both units.
4 Power LED On: The device is powered on.
Off: The device is powered off.
5 HDMI In (1&2)
Connect to HDMI sources.
HDMI In 1 and 2 signals are extended to HDMI Out 1 and 2
respectively.
6
USB Host
Connect to a host PC.
7 USB Host LED
Breathing Status: No USB device is connected.
Solid on: USB device is linked.
Flashing: USB data is being transmitted.
Receiver
1 2 3 54 6 5
7
No.
Name
Description
1 Status LED On: HDMI data is being transmitted.
Off: No signal.
2
UTP In
Connect to UTP Out port of the transmitter.
3 DC 12V
Connect to the provided power adapter.
With one-way PoC
supported, one power adapter is needed to be connected to
the receiver to power both units.
4 Power LED On: The device is powered on.
Off: The device is powered off.
5
HDMI Out (1&2)
Connect to HDMI displays. HDMI Out 1 and 2 output signals
Installation and Application
www.avaccess.com
4
info@avaccess.com
No.
Name
Description
from HDMI In 1 and 2 respectively.
6 USB Device
Connect to USB devices.
Note: USB ports support the USB 2.0 stan
dard with a
maximum of 1A for the top two ports and 0.5A on the bottom
two ports. Before connecting a USB 3.0 device, confirm the
compatibility with USB 2.0.
7 USB Device LED
Breathing Status: No USB device is connected.
Solid on: USB devices are linked.
Flashing: USB data is being transmitted.
Installation and Application
Brackets Installation
Note: Before installation, please ensure the extender is disconnected from the
power source.
Steps to install the device in a suitable location
1. Attach the installation bracket to the enclosure using the screws that were
provided in the package separately. The bracket height can be adjusted
up/down or bracket face up or down.
2. The bracket is attached to the enclosure as shown.
3. Repeat steps 1-2 for the other side of the unit.
4. Attach the brackets to the surface you want to hold the unit against using
the screws (provided by others).
5. Repeat steps 1-4 to install the receiver.
Installation and Application
www.avaccess.com
5
info@avaccess.com
Application
Users can connect a PC to USB Host port of the transmitter. Insert the PC to HDMI
In 1/2 port of the transmitter. All USB devices connected to the receiver will be
connected to the PC. The display connected to HDMI Out 1/2 of the receiver will
display the signal from HDMI In 1/2.
Note:
The Cat 5e/6/6a/7 cable used must be within 60m/197ft.
With one-way PoC supported, one power adapter is needed to be
connected to the receiver to power both units.
The two USB 2.0 ports supports 1A can be connected to high-power USB
devices such as USB camera, USB hard disk.
Specifications
www.avaccess.com
6
info@avaccess.com
Specifications
Technical
Video Signal Type HDMI with 1080P@60Hz, 4:4:4 8bit, HDCP 1.4
Input/Output Resolution 1080P@60/50/30/25Hz; 720P@60/50Hz; 480P@60Hz
Audio Format PCM 2.0
Max Data Rate 6.75 Gbps
General
Operating Temperature 0°C to 45°C (32°F to 113°F)
Storage Temperature -20°C to 70°C (-F to 158°F)
Humidity 20% to 90%, non-condensing
Power Consumption 5.7W (Maximum)
Device Dimensions
(W x H x D) 140 mm ×25 mm ×80.2 mm/ 5.51'' x 0.98'' x 3.16''
Product Weight Transmitter/Receiver: 0.33kg/0.73lb
Transmission Distance
Note: T568B straight-through Category cable is recommended.
Cable Type Range Supported Video
Cat 5e/6/6a/7 60m/197ft 1080P@60Hz 4:4:4 8bit
HDMI Input/Output: 10m/33ft
Warranty
www.avaccess.com
8
info@avaccess.com
Warranty
Products are backed by a limited 1-year parts and labor warranty. For the following
cases AV Access Technology Limited shall charge for the service(s) claimed for the
product if the product is still remediable and the warranty card becomes
unenforceable or inapplicable.
1. The original serial number (specified by AV Access Technology Limited) labeled
on the product has been removed, erased, replaced, defaced or is illegible.
2. The warranty has expired.
3. The defects are caused by the fact that the product is repaired, dismantled or
altered by anyone that is not from an AV Access Technology Limited authorized
service partner. The defects are caused by the fact that the product is used or
handled improperly, roughly or not as instructed in the applicable User Guide.
4. The defects are caused by any force majeure including but not limited to
accidents, fire, earthquake, lightning, tsunami and war.
5. The service, configuration and gifts promised by salesman only but not
covered by normal contract.
6. AV Access Technology Limited preserves the right for interpretation of these
cases above and to make changes to them at any time without notice.
Thank you for choosing products from AV Access.
AV Access Technology Limited
V1.0.1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

AV Access HDEX60-DM User manual

Type
User manual

AV Access HDEX60-DM is a dual HDMI KVM extender kit that allows you to transmit dual HDMI signals up to 1080P@60Hz 4:4:4 8bit to two HDMI displays via a single Cat 5e/6/6a/7 cable. It supports one-way PoC, so only one power adapter is needed to be connected to the receiver to power both units. With one USB host port in the transmitter and four USB 2.0 device ports in the receiver, the kit also supports USB 2.0 pass-through, including two ports with 5V/1A current output for high-power USB devices like cameras or hard disks.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI