2. urban ambiance
  3. UQL3668

urban ambiance UQL3668 Installation guide

  • Hello! I've reviewed the installation instructions for the Urban Ambiance UQL3668 light fixture and the UQL3664 pendant. This document details how to assemble and install the light, including wiring and bulb installation. The fixture has an adjustable height from 12 to 50 inches and accepts a standard E26 base bulb. I'm ready to answer your questions about the installation.
  • What type of bulb is required?
    What is the maximum wattage for the light fixture?
    What is the adjustable height range of the fixture?
1 of 4
Crossbar Assembly
x 1
A
Package Contents
PARTS BAG
Ring
x 1
D
6”L Rod
x 2
F12”L Rod
x 2
G
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Light SourceTools Required
1 BULB REQUIRED
BULB NOT INCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Fixture Height Adjustable
12” to 50”
Outlet Box Screw
x 2
B
Wire Connector
x 3
C
Ceiling Canopy
Assembly
x 1
H
Table of
Contents
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
E
Shade
x 1
I
Fixture Body
x 1
Crossbar
Assembly
Ceiling Canopy
Assembly & Downrod Wiring Bulb
STEP 1 STEP 2 STEP 3 STEP 6
Ceiling Canopy
STEP 4
Ring & shade
STEP 5
Installation Instructions: UQL3668
www.urbanambiance.com
2 of 4
STEP 1 1 2 3
Step 1
Install crossbar assembly
Step 2 - 3
Test fitting ceiling canopy to
mounting screws
STEP 2
OPTION 1
1
OPTION 2 Semi-flush — 3668
Install rods
Optional Rods
8’ ceiling:
(2) 12”L rods
9’ ceiling:
(2) 6”L + (2) 12”L rods
Pendant — UQL3664
2
Tighten hex nut inside
of the ceiling canopy
3
Install Ceiling Canopy
1
Remove swivel
2
Install ceiling canopy
www.urbanambiance.com
3 of 4
STEP 3
*Green Ground Screw on
crossbar optional
White wire (neutral)
from outlet box White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 4
STEP 5 1
Remove socket collar Place the ring
2
OPTION 1
UQL3664
OPTION 2
UQL3668
3
Install shade with ring
OPTION 2
UQL3668
OPTION 1
UQL3664
www.urbanambiance.com
4 of 4
STEP 6 OPTION 2
UQL3668
OPTION 1
UQL3664
www.urbanambiance.com
/