2. urban ambiance
  3. UQL3930

urban ambiance UQL3930 Installation guide

  • Hello! I've reviewed the installation instructions for the Urban Ambiance UQL3930 light fixture. This document provides a step-by-step guide, covering everything from mounting the crossbar to installing the glass shade. It also highlights the importance of safety measures during installation, such as turning off the power. I'm ready to answer your questions about the installation process or the fixture itself.
  • What type of bulbs are required?
    Are bulbs included with the fixture?
    What should I do before installation?
1of3
Crossbar Assembly
x1
A
Package Contents
PARTS BAG
Fixture Body
x1
D
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
LightSourceToolsRequired
3BULBSREQUIRED
BULBSNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Outlet Box Screw
x2
B
Wire Connector
x3
C
Crossbar
Assembly
Table of
Contents
STEP 1
Glass Shade
x1
E
Bulbs
STEP 4
Fixture Body
STEP 3
Wiring
STEP 2
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
40W
MAX
Glass Shade
STEP 5
Installation Instructions: UQL3930
www.urbanambiance.com
2of3
STEP 1
1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to
mounting screws
STEP 2
*Green Ground Screw on
crossbar optional
White wire (neutral)
from outlet box White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 3
www.urbanambiance.com
3of3
STEP 4
1 2
Remove Lock Screws Install Bulbs
STEP 5
1 2
Install Glass to Ring Install Ring with Glass
www.urbanambiance.com
/