Cascadia T0144 Installation guide

Cascadia
Brand
Cascadia
Model
T0144
Type
Installation guide

This manual is also suitable for

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
T0144 / T0145
Hardware Package (included):
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
141101
Turn off the power at the main fuse or circuit breaker box.
Turn on the power at the main fuse or circuit breaker box.
1. Attach two fixture mounting screws to the mounting plate, and secure them with two lock nuts.
2. Attach the mounting plate to the outlet box using two mounting screws.
3. Pull out the wires and grounding wire from the outlet box. Make wire connections using the wire nuts. as follow:
---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting plate with the green
grounding screw. Then connect it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
4. Attach the main fixture to the mounting plate by inserting the fixture mounting screws, and secure it with two ball nuts.
5. Install bulb (not included). See relamping label at socket area or packaging for maximum allowed wattage.
Mounting Screw (B)
Fixture Mounting
Screw (D)
Green Grounding
Screw (C)
Wire Nut (E)
Mounting Plate (A)
Installation Steps
Ball Nut (G)
Outlet Box
House Grounding Wire
Wire Nut (E)
Fixture Mounting Screw (D)
Mounting Plate (A)
Green Grounding Screw (C)
Mounting Screw (B)
Lock Nut (F)
Bulb Type A Max.100W
(not included)
Socket
Main Fixture
Ball Nut (G)
Lock Nut (F)
The following parts are available for re-order if damaged or missing.
Spare Parts List:
A: 13"
B: 11-7/8"
141101
Assembly Kit
5174MM (1 SET) for T0144
5175MM (1 SET) for T0145
Mounting Screw (B)
Fixture Mounting
Screw (D)
Green Grounding
Screw (C)
Wire Nut (E)
Mounting Plate (A)
Ball Nut (G)
Lock Nut (F)
  • Page 1 1
  • Page 2 2

Cascadia T0144 Installation guide

Cascadia
Brand
Cascadia
Model
T0144
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents