2. Baxton Studio
  3. Panama-Clear/Natural-ET

Baxton Studio Panama-Clear/Natural-ET Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Panama table. This document provides a clear, step-by-step guide to help you assemble your table, covering everything from the initial parts inventory to the final steps of attaching the foot caps and metal plate. I'm ready to assist with any questions you might have about assembling the product.
  • What should I do before starting assembly?
    What surface should I use to assemble the product?
    When should I tighten the bolts?
ASSEMBLY INSTRUCTION
PARTS LIST
FITTINGS
1. - 1 Pc. 2. - 4 Pcs.
1.
3. - 1 Pc.
A.M8-12Pcs. B.M8-12Pcs. C.M6-1Pc. D.M6-1Pc. E.M4-1Pc. F.M5-1Pc. G.-1Pc. H.-1Pc.
I.M6-4Pcs. J.-4Pcs.
2
3
F
A
B
A
F
1
I
J
2.
3.
E
D
G
H
C
1. We suggest that you spend a short time reading through these instructions and follow the sample
step by step example.
2. Do not discard any of the packaging until you have checked that you have all the parts and
fittings.
3. Assemble this product on a flat surface.
4. Assemble all parts loosely before tightening any bolts
STEP 1 :Assemble parts list no. 3 and legs together
STEP 2 : Screw legs on the plate
STEP 3 :Assemble the foot caps on the legs
STEP 4 :Assemble the metal plate on the legs' center
/