2. Computers & electronics
  3. Computer cables
  4. Signal cables
  5. KERN
  6. TYKUP-06-A

KERN TYKUP-06-A Installation guide

  • Hello, I have reviewed the Installation Instructions for the KERN KUP-06 Interface Adapter. This document details how to install and use the adapter to transfer weighing data wirelessly via Bluetooth. The adapter connects to the balance's 15-pin sub-D port and is recognized automatically. It uses BLE for data transfer and requires compatible software to access. I am ready to answer your questions about its setup and features.
  • What is the purpose of the KUP-06 adapter?
    What type of Bluetooth does the KUP-06 adapter use?
    How is the adapter recognized by the appliance?
KERN & Sohn GmbH
Ziegelei 1
72336 Balingen-Frommern
Germany
+0049-[0]7433-9933-0
+0049-[0]7433-9933-149
[email protected]
Installation Instructions
Interface Adapter with Cable for Blue-
tooth
KERN KUP-06
Type TYKUP-06-A
Version 1.2
2023-06
GB
The current version of these instructions can also be found online under:
https://www.kern-sohn.com/shop/de/DOWNLOADS/
under the rubric Instruction manuals
TYKUP-06-A-IA-e-2312
2 TYKUP-06-A-IA-e-2312
Interface Adapter with Cable for Blue-tooth
Version 1.2 2023-06
Installation Instructions
Contents
1 Declaration of Conformity ......................................................................... 2
2 Scope of delivery ........................................................................................ 2
3 General information ................................................................................... 2
4 Installation .................................................................................................. 3
1 Declaration of Conformity
The valid Declaration of Conformity EC/UE is available at:
www.kern-sohn.com/ce
2 Scope of delivery
• Interface Adapter with Cable for Bluetooth
• Installation Instructions
3 General information
Transmit frequency: 2402-2480MHz
Maximum transmit power: < 20dBm
Cable length: 0.15 m
• Weighing data can be transferred via Bluetooth.
• Only KERN KUP-adapters may be connected to the 15-pol-sub-
D-connection of the balance!
TYKUP-06-A-IA-e-2312 3
4 Installation
1. Switch off the appliance
2. Plug in the interface adapter at the KUP connection
3. Switch on the appliance. The interface adapter is automatically recognized by the
appliance.
The KUP adapter is compatible with Bluetooth Low Energy (BLE) and is visible under
"KERN BLE" with a unique MAC address for Bluetooth Master devices.
To access this, please use an appropriate software program / app which supports
Bluetooth Low Energy (BLE). Applications exclusively using Bluetooth Classic (BLC)
will not work.
The following profile must be adjusted:
Service UUID
0000fff0-0000-1000-8000-00805f9b34fb
Read characteristic UUID
0000fff1-0000-1000-8000-00805f9b34fb
Write characteristic UUID
0000fff2-0000-1000-8000-00805f9b34fb
/