Spytec Zetta Z12 Quick start guide

Brand: Spytec

Model: Zetta Z12

Type: Quick start guide

Zetta Z12

Quick start guide

www.spytecinc.com

Intelligent Security Camcorder

Preparing Device for First Time Use

1. Insert your Micro SD card into the slot located

next to the USB Port.

2. Connect the USB power adapter for 6-8 hours

to fully charge the clock.

3. Use the switch next to the LED indicator to

select one of the three Modes: Surveillance

(Far left), On-the GO (Center) or Custom (Far

right).

4. To start recording, press and hold the power

button until the green LED turns on, and then

release the button. When you see the green

LED flashing, the camcorder is recording.

5. To stop recording, press and hold the power

button until the green LED turns o.

Download Software Widget

1. Download the Zetta Z12 software widget for

the correct operating system. http://www.zet-

ta.com.hk/index.php/supports/downloads

2. Click on the downloaded file to start installa-

tion. Choose language and click next. Accept

the license agreement and click next to finish

installation.

Custom Mode Configuration

Connecting Device to Computer

1. Connect the large end of the USB cable into an

available USB port on the computer.

2. Connect the smaller end of the cable into the

USB port on the camcorder.

3. The camcorder will appear in My Computer as

a device.

1. Set the device switch to Custom Mode (place

switch to the far right).

2. Click on the Zetta Widget to start the program.

Make sure time is set correctly by clicking on

“Sync Date Time to DVR”.

3. Click on Settings on the left column to find

the 7 preset custom modes. Select the desired

mode and click on “Sync Setting to DVR” to

save the new settings to the camcorder.

www.spytecinc.com

Zetta Z12

Quick start guide

Intelligent Security Camcorder

1
2
3
4

Spytec Zetta Z12 Quick start guide

Brand: Spytec

Model: Zetta Z12

Type: Quick start guide

Related papers

Other documents