Channel Vision VB-1 User manual

Channel Vision
Brand
Channel Vision
Model
VB-1
Type
User manual

Channel Vision VB-1 is a Video Balun Kit that allows you to convert a baseband signal via BNC male connector to an 18-22 gauge twisted pair (Cat5) via the screws or RJ-45 connector. It is capable of a run of 800’ to 1600’ and is a 2-part system with one part (VBS78-PW) placed at the camera location, and the second part (VBS78-SP) placed at the modulator/monitor location. The VBS78-SP is the powered unit and the VBS78-PW extracts power at the camera location. The kit also includes a transformer and an RJ-45 Connector Part # J-01-8S-C5.

Channel Vision VB-1 is a Video Balun Kit that allows you to convert a baseband signal via BNC male connector to an 18-22 gauge twisted pair (Cat5) via the screws or RJ-45 connector. It is capable of a run of 800’ to 1600’ and is a 2-part system with one part (VBS78-PW) placed at the camera location, and the second part (VBS78-SP) placed at the modulator/monitor location. The VBS78-SP is the powered unit and the VBS78-PW extracts power at the camera location. The kit also includes a transformer and an RJ-45 Connector Part # J-01-8S-C5.

Channel Vision
Limited Warranty
Channel Vision Technology will repair or replace any defect
in material or workmanship which occur during normal use of
this product with new or rebuilt parts, free of charge in the
USA, for two years from the date of original purchase. This is
a no hassle warranty with no mail in warranty card needed.
This warranty does not cover
damages in shipment, failures
caused by other products not supplied by Channel Vision
Technology, or failures due to accident, misuse, abuse, or
alteration of the equipment. This warranty is extended only to
the original purchaser, and a purchase receipt, invoice, or
other proof of original purchase date will be required before
warranty repairs are provided.
Mail in service can be obtained during the warranty period by
calling (800) 840-0288 toll free. A return Authorization
number must be obtained in advance and can be marked on
the outside of the shipping carton.
This warranty gives you specific legal rights, and you may
have other rights (which vary from state to state). If a problem
with this product develops during, or after, the warranty
period, please contact Channel Vision, your dealer, or any
factory-authorized service center.
Descriptions:
The Video Balun Kit is designed to convert a
baseband signal via BNC male connector to an
18-22 gauge twisted pair (Cat5) via the screws
or RJ-45 connector. It is capable of a 800’ to
1600’ run. One part (VBS78-PW) is placed at
the camera location, and the second part
(VBS78-SP) is placed at the modulator/monitor
location.
Specifications:
Cat5 minimum
BNC male connector
2-part system
VBS78-SP: powered unit
VBS78-PW: extracts power at camera location
Dimension: 2-1/4” x 2-1/4”
Camera current must not exceed 250mA
Cam Options
Night vision:5125(B/W)
6125(Color)
Standard B/W:5125/5005
Color Cams:6007/6005
BNC Male Connector
VQ-4
(QUAD)
CVT or E-Series
Modulators
BS78-SP
Transformer
supplied
BS78-PW
Camera
PW Extracts power from the (SP)
CAT 5 Minimum
RJ-45 Connector Part # J-01-8S-C5
1,000 ' B/W CAM
800' for Clolor
Output of SP can also be installed
direct into a CCTV monitor
option
VBS78-SP
VBS78-PW
VB-1 Kit
(VBS78-SP & VBS78-PW)
Video Balun Kit
234 FISCHER AVENUE z COSTA MESA, CA 92626
(714) 424-6500
z (800) 840-0288 z (714) 424-6510 FAX
HTTP://WWW.CHANNELVISION.COM z E-MAIL: SALES@CHANNELVISION.COM
  • Page 1 1

Channel Vision VB-1 User manual

Channel Vision
Brand
Channel Vision
Model
VB-1
Type
User manual

Channel Vision VB-1 is a Video Balun Kit that allows you to convert a baseband signal via BNC male connector to an 18-22 gauge twisted pair (Cat5) via the screws or RJ-45 connector. It is capable of a run of 800’ to 1600’ and is a 2-part system with one part (VBS78-PW) placed at the camera location, and the second part (VBS78-SP) placed at the modulator/monitor location. The VBS78-SP is the powered unit and the VBS78-PW extracts power at the camera location. The kit also includes a transformer and an RJ-45 Connector Part # J-01-8S-C5.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents