AG Neovo PN-46D User manual

PN-46D LED-Backlit Display

User Manual

displays.agneovo.com

TABLE OF CONTENTS

SAFETY INFORMATION .............................................................................. 1

Federal Communications Commission (FCC) Notice (U.S. Only) ............................................................ 1

Polish Center for Testing and Certication Notice .................................................................................... 2

Electric, Magnetic and Electromagnetic Fields (“EMF”) ........................................................................... 2

Information for U.K. only ........................................................................................................................... 3

North Europe (Nordic Countries) Information ........................................................................................... 4

End-of-Life Disposal ................................................................................................................................. 5

Waste Electrical and Electronie Equipment-WEEE .................................................................................. 5

PRECAUTIONS ............................................................................................ 6

Cautions When Setting Up ....................................................................................................................... 6

Cautions When Using ............................................................................................................................... 7

Cleaning and Maintenance ....................................................................................................................... 7

Notice for the LCD Display ....................................................................................................................... 8

CHAPTER 1: PRODUCT DESCRIPTION ..................................................... 9

1.1 Package Contents .............................................................................................................................. 9

1.2 Preparing for the Installation .............................................................................................................. 10

1.3 Installing and Removing Table Stands (optional) ............................................................................... 10

1.4 Wall Mounting Installation ................................................................................................................... 11

1.4.1 VESA Grid ............................................................................................................................... 11

1.4.2 Ventilation Requirements for Enclosure Locating .................................................................... 12

1.5 Mounting in Portrait Position .............................................................................................................. 12

1.6 Installing OPS Device ......................................................................................................................... 13

1.7 LCD Display Overview ....................................................................................................................... 14

1.7.1 Control Panel ........................................................................................................................... 14

1.7.2 Input/Output Terminals ............................................................................................................ 16

1.8 Remote Control .................................................................................................................................. 17

1.8.1 General Functions ................................................................................................................... 17

1.8.2 Inserting the Batteries in the Remote Control ......................................................................... 19

1.8.3 Handling the Remote Control .................................................................................................. 19

1.8.4 Operating Range of the Remote Control ................................................................................. 19

CHAPTER 2: MAKING CONNECTIONS ...................................................... 20

2.1 Connecting the Power ........................................................................................................................ 20

2.2 Using the Switch Cover ...................................................................................................................... 21

2.3 Connecting a Computer ..................................................................................................................... 22

2.3.1 Using VGA Input ..................................................................................................................... 22

2.3.2 Using DVI Input ....................................................................................................................... 22

2.3.3 Using HDMI Input .................................................................................................................... 23

2.3.4 Using DisplayPort Input ........................................................................................................... 23

2.4 Connecting External Equipment (DVD/VCR/VCD) ............................................................................. 24

2.4.1 Using COMPONENT Video Input ........................................................................................... 24

2.4.2 Using Video Source Input ........................................................................................................ 24

2.4.3 Using HDMI Video Input ......................................................................................................... 25

TABLE OF CONTENTS

2.5 Connecting Audio Equipment ............................................................................................................. 25

2.5.1 Connecting External Speakers ............................................................................................... 25

2.5.2 Connecting an External Audio Device ..................................................................................... 26

2.6 Connecting Multiple Displays in a Daisy-chain Conguration ............................................................ 27

2.6.1 Display Control Connection ..................................................................................................... 27

2.6.2 Digital Video Connection ......................................................................................................... 27

2.6.3 Analog Video Connection ....................................................................................................... 28

2.7 IR Connection ..................................................................................................................................... 28

2.8 IR Pass-Through Connection ............................................................................................................. 29

2.9 Connecting to Wired Network ............................................................................................................. 30

CHAPTER 3: USING THE LCD DISPLAY .................................................... 31

3.1 Turning on the Power ......................................................................................................................... 31

3.2 Selecting the Input Source Signal ...................................................................................................... 31

3.3 Adjusting the Volume .......................................................................................................................... 32

3.4 Changing the Picture Format ............................................................................................................. 32

3.5 Choosing Your Preferred Picture Settings ......................................................................................... 33

3.6 Adjusting the Brightness Level ........................................................................................................... 33

CHAPTER 4: ON SCREEN DISPLAY MENU ............................................... 34

4.1 Using the OSD Menu ......................................................................................................................... 34

4.2 OSD Menu Tree ................................................................................................................................. 36

CHAPTER 5: ADJUSTING THE LCD DISPLAY .......................................... 38

5.1 Picture Settings .................................................................................................................................. 38

5.2 Screen Settings .................................................................................................................................. 40

5.3 Audio Settings .................................................................................................................................... 42

5.4 PIP Settings ........................................................................................................................................ 43

5.5 Conguration1 Settings ...................................................................................................................... 45

5.6 Conguration2 Settings ...................................................................................................................... 47

5.7 Conguration3 Settings ...................................................................................................................... 51

5.8 Advanced Option Settings .................................................................................................................. 53

CHAPTER 6: APPENDIX .............................................................................. 56

6.1 Warning Messages ............................................................................................................................. 56

6.2 Supported Resolution ......................................................................................................................... 57

6.3 Cleaning ............................................................................................................................................. 58

6.4 Troubleshooting .................................................................................................................................. 59

6.5 Transporting the LCD Display ............................................................................................................ 60

CHAPTER 7: SPECIFICATIONS .................................................................. 61

7.1 Display Specications ........................................................................................................................ 61

7.2 Display Dimensions ............................................................................................................................ 62

7.2.1 PN-46D Dimensions ................................................................................................................ 62

1

Federal Communications Commission (FCC) Notice (U.S. Only)

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Use only an RF shielded cable that was supplied with the display when connecting this display to a computer

device.

To prevent damage which may result in re or shock hazard, do not expose this appliance to rain or excessive

moisture.

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-

CAUSING EQUIPMENT REGULATIONS.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

SAFETY INFORMATION

2

SAFETY INFORMATION

Electric, Magnetic and Electromagnetic Fields (“EMF”)

• We manufacture and sell many products targeted at consumers, which, like any electronic apparatus, in

general have the ability to emit and receive electromagnetic signals.

• One of our leading Business Principles is to take all necessary health and safety measures for our

products, to comply with all applicable legal requirements and to stay well within the EMF standards

applicable at the time of producing the products.

• We are committed to develop, produce and market products that cause no adverse health effects.

• We conrm that if its products are handled properly for their intended use, they are safe to use according to

scientic evidence available today.

• We play an active role in the development of international EMF and safety standards, enabling us to

anticipate further developments in standardization for early integration in its products.

Polish Center for Testing and Certication Notice

The equipment should draw power from a socket with an attached protection circuit (a three-prong socket).

All equipment that works together (computer, display, printer, and so on) should have the same power supply

source.

The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device

in the form of a fuse with a nominal value no larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply

socket, which should be located near the equipment and easily accessible.

A protection mark “B” conrms that the equipment is in compliance with the protection usage requirements of

standards PN-93/T-42107 and PN-89/E-06251.

3

SAFETY INFORMATION

Information for U.K. only

WARNING - THIS APPLIANCE MUST BE EARTHED.

(A)

(B)

Important:

This apparatus is supplied with an approved moulded 13A plug. To

change a fuse in this type of plug proceed as follows:

1 Remove fuse cover and fuse.

2 Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI

approved type.

3 Ret the fuse cover.

If the tted plug is not suitable for your socket outlets, it should be cut

off and an appropriate 3-pin plug tted in its place.

If the mains plug contains a fuse, this should have a value of 5A. If a

plug without a fuse is used, the fuse at the distribution board should

not be greater than 5A.

Note:

The severed plug must be

destroyed to avoid a possible shock

hazard should it be inserted into a

13A socket elsewhere.

4

SAFETY INFORMATION

How to connect a plug

The wires in the mains lead are coloured in accordance with the following code:

BLUE - “NEUTRAL” (“N”)

BROWN - “LIVE” (“L”)

GREEN & YELLOW - “EARTH” (“E”)

• The GREEN & YELLOW wire must be connected to the terminal in the plug which is marked with the letter

“E” or by the Earth symbol or coloured GREEN or GREEN & YELLOW.

• The BLUE wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.

• The BROWN wire must be connected to the terminal which marked with the letter “L” or coloured RED.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not

simply over the three wires.

North Europe (Nordic Countries) Information

Placering/Ventilation

VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU

STÄLLER DIN UTRUSTNING PÅPLATS.

Placering/Ventilation

ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT

TILGÆNGELIGE.

Paikka/Ilmankierto

VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI

IRROTTAA PISTORASIASTA.

Plassering/Ventilasjon

ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE

FOR STØMTILFØRSEL ER LETTE Å NÅ.

5

SAFETY INFORMATION

End-of-Life Disposal

Your new Public Information Display contains materials that can be recycled and reused. Specialized

companies can recycle your product to increase the amount of reusable materials and to minimize the amount

to be disposed of.

Please nd out about the local regulations on how to dispose of your old display from your local dealer.

(For customers in Canada and U.S.A.)

This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations.

For additional information on recycling contact www.eia.org (Consumer Education Initiative).

Waste Electrical and Electronie Equipment-WEEE

Attention users in European Union private households

This marking on the product or on its packaging illustrates that, under European Directive

2012/19/EU governing used electrical and electronic appliances, this product may not be

disposed of with normal household waste. You are responsible for disposal of this equipment

through a designated waste electrical and electronic equipment collection. To determine the

locations for dropping off such waste electrical and electronic, contact your local government

ofce, the waste disposal organization that serves your household or the store at which you

purchased the product.

Attention users in United States:

Please dispose of according to all Local, State and Federal Laws. For the disposal or recycling information,

contact: www.mygreenelectronics.com or www.eiae.org.

End of Life Directives-Recycling

Your new Public Information Display contains several materials that can be recycled for new

users.

Please dispose of according to all Local, State, and Federal laws.

6

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Symbols used in this manual

This icon indicates the existence of a potential hazard that could result in personal injury

or damage to the product.

This icon indicates important operating and servicing information.

Notice

• Read this User Manual carefully before using the LCD display and keep it for future reference.

• The product specications and other information provided in this User Manual are for reference only. All

information is subject to change without notice. Updated content can be downloaded from our web site at

displays.agneovo.com.

• To register online, go to displays.agneovo.com.

• To protect your rights as a consumer, do not remove any stickers from the LCD display. Doing so may

affect the determination of the warranty period.

Cautions When Setting Up

• Do not place the LCD display near heat sources, such as a heater, exhaust vent, or in direct sunlight.

• Do not cover or block the ventilation holes in the housing.

• Place the LCD display on a stable area. Do not place the LCD display where it may subject to vibration or

shock.

• Place the LCD display in a well-ventilated area.

• Do not place the LCD display outdoors.

• To avoid the risk of shock or permanent damage to the set, do not expose the display to dust, rain, water or

an excessively moist environment.

• Do not spill liquid or insert sharp objects into the LCD display through the ventilation holes. Doing so may

cause accidental re, electric shock or damage the LCD display.

PRECAUTIONS

7

PRECAUTIONS

Warning:

Unplug the power cord

from the power outlet and

refer to qualied service

personnel under the following

conditions:

♦ When the power cord is

damaged.

♦ If the LCD display has been

dropped or the housing has

been damaged.

♦ If the LCD display emits smoke

or a distinct odor.

Cautions When Using

• Use only the power cord supplied with the LCD display.

• The power outlet should be installed near the LCD display and

be easily accessible.

• If an extension cord is used with the LCD display, ensure that the

total current consumption plugged into the power outlet does not

exceed the ampere rating.

• Do not allow anything to rest on the power cord. Do not place the

LCD display where the power cord may be stepped on.

• If the LCD display will not be used for an indenite period of time,

unplug the power cord from the power outlet.

• To disconnect the power cord, grasp and pull by the plug head.

Do not tug on the cord; doing so may cause re or electric shock.

• Do not unplug or touch the power cord with wet hands.

• When turning off the display by detaching the power cord, wait 6

seconds before re-attaching the power cord for normal operation.

• Do not knock or drop the display during operation or

transportation.

Cleaning and Maintenance

• To protect your display from possible damage, do not put

excessive pressure on the LCD panel. When moving your

display, grasp the frame to lift; do not lift the display by placing

your hand or ngers on the LCD panel.

• Unplug the display if you need to clean it with a slightly damp

cloth. The screen may be wiped with a dry cloth when the power

is off. However, never use organic solvent, such as, alcohol, or

ammonia-based liquids to clean your display.

• If your display becomes wet, wipe it with dry cloth as soon as

possible.

• If a foreign substance or water gets in your display, turn the

power off immediately and disconnect the power cord. Then

remove the foreign substance or water, and send the unit to the

maintenance center.

• In order to maintain the best performance of your display and

ensure a longer lifetime, we strongly recommend using the

display in a location that falls within the following temperature

and humidity ranges.

♦ Temperature: 0-40°C (32-104°F)

♦ Humidity: 20-80% RH

8

PRECAUTIONS

Notice for the LCD Display

• In order to maintain the stable luminous performance, it is recommended to use low brightness setting.

• Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD display may decrease

with time.

• When static images are displayed for long periods of time, the image may cause an imprint on the LCD

display. This is called image retention or burn-in.

♦ To prevent image retention, do any of the following:

• Set the LCD display to turn off after a few minutes of being idle.

• Use a screen saver that has moving graphics or a blank white image.

• Execute the ANTI-BURN-IN function of the LCD display. See “Conguration3 Settings, SCREEN

SAVER > ANTI-BURN-IN” section.

• Switch desktop backgrounds regularly.

• Adjust the LCD display to low brightness settings.

• Turn off the LCD display when the system is not in use.

♦ Things to do when the LCD display shows image retention:

• Turn off the LCD display for extended periods of time. It can be several hours or several days.

• Use a screen saver and run it for extended periods of time.

• Use a black and white image and run it for extended periods of time.

• There are millions of micro transistors inside the LCD display. It is normal for a few transistors to be

damaged and to produce spots. This is acceptable and is not considered a failure.

• IMPORTANT: Always activate a moving screen saver program when you leave your display unattended.

Always activate a periodic screen refresh application if the unit will display unchanging static content.

Uninterrupted display of still or static images over an extended period may cause “burn in”, also known

as “after-imaging” or “ghost imaging”, on your screen. This is a well-known phenomenon in LCD panel

technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will disappear gradually

over a period of time after the power has been switched off.

• WARNING: Severe “burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be

repaired. This is also not covered under the terms of your warranty.

9

1.1 Package Contents

When unpacking, check if the following items are included in

the package. If any of them is missing or damaged, contact your

dealer.

User Manual

Power cord

Note:

♦ The pictures are for reference

only. Actual items may vary

upon shipment.

POWER

SMART

VIDEO

SOURCE

PIP

INPUTON/OFF CHANGE

BRIGHTNESSCONTRAST

DISPLAY

AUTO

ADJUST

MUTE

VOL UP

VOL DOWN

EXIT

MENU

SET

AUDIO

SOURCE

Remote control

LCD Display

Note:

♦ Remote control is shipped with

the supplied AAA batteries.

♦ For all other regions, apply a

power cord that conforms to

the AC voltage of the power

socket and has been approved

by and complies with the safety

regulations of the particular

country.

♦ You might like to save the

package box and packing

material for shipping the

display.

Video signal cable

(D-SUB to D-SUB cable)

IR sensor cable

CHAPTER 1: PRODUCT DESCRIPTION

Power switch cover

and screw (M3x8) x1

10

PRODUCT DESCRIPTION

1.2 Preparing for the Installation

• Due to the high power consumption, always use the plug

exclusively designed for this product. If an extended line is required,

please consult your service agent.

• The product should be installed on a at surface to avoid tipping.

The distance between the back of the product and the wall should

be maintained for proper ventilation. Avoid installing the product in

the kitchen, bathroom or any other places with high humidity so as

not to shorten the service life of the electronic components.

• The product can normally operate only under 5000m in altitude. In

installations at altitudes above 3000m, some abnormalities may be

experienced.

1.3 Installing and Removing Table Stands

(optional)

To install table stands:

1 Ensure your display is powered off.

2 Spread a protective sheet on a at surface.

3 Grab the carrying handles and place the display face-down

on the protective sheet.

4 After inserting the stand in the guide block, tighten the

screws on both sides of the display.

Note:

♦ The longer side of the stand

should face the front of the

display.

To remove table stands:

1 Power off the display.

2 Spread a protective sheet on a at surface.

3 Grab the carrying handles and place the display face-down

on the protective sheet.

4 Remove screws using a screwdriver and place them in a

safe place for reuse.

Carrying handle

Table stand

Longer portions face to front

Thumbscrews

Warning:

♦ Do not press too hard on the

LCD panel or edge of the

frame, as this may cause the

device to malfunction.

♦ During unpacking, make sure

to hold the carrying handles

to remove the device from its

packaging.

11

PRODUCT DESCRIPTION

1.4 Wall Mounting Installation

To mount this display to a wall, you will have to obtain a standard

wall-mounting kit (commercially available). We recommend using

a mounting interface that complies with TUV-GS and/or UL1678

standard in North America.

To wall-mount the LCD display, screw the mounting bracket to the

VESA holes at the rear of the LCD display.

1.4.1 VESA Grid

Model Name VESA Grid

PN-46D 400(H) x 200(V) mm

200(H) x 200(V) mm

Caution:

To prevent the display from falling:

♦ For wall or ceiling installation, we recommend installing the

display with metal brackets which are commercially available.

For detailed installation instructions, refer to the guide received

with the respective bracket.

♦ To lessen the probability of injury and damage resulting from fall

of the display in case of earthquake or other natural disaster, be

sure to consult the bracket manufacturer for installation location.

Note:

♦ Avoid the wall-mounting kit to

block the ventilation holes on

the back of the display.

♦ Secure the LCD display on a

solid wall strong enough to bear

its weight.

♦ Lay a protective sheet on a

table, which was wrapped

around the display when it was

packaged, beneath the screen

surface so as not to scratch the

screen face.

♦ Ensure you have all

accessories for mounting this

display (wall mount, ceiling

mount, table stand, etc).

♦ Follow the instructions that

come with the base mounting

kit. Failure to follow correct

mounting procedures could

result in damage to the

equipment or injury to the user

or installer. Product warranty

does not cover damage caused

by improper installation.

♦ For the wall-mounting kit, use

M6 mounting screws (having

a length 10 mm longer than

the thickness of the mounting

bracket) and tighten them

securely.

400mm

200mm

12

PRODUCT DESCRIPTION

1.4.2 Ventilation Requirements for Enclosure Locating

To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.

100 mm 100 mm

100 mm

1.5 Mounting in Portrait Position

This display can be installed in portrait position.

1 Remove the table stand, if attached.

2 Rotate 90 degrees counter-clockwise.

90

13

PRODUCT DESCRIPTION

1.6 Installing OPS Device

To install OPS device into its slot on the LCD display, do the following:

1 Remove the screws on the handle, and then remove the handle.

2 Remove the screws on the OPS cover, and then remove the OPS cover.

3 Install the OPS device into its slot.

4 Secure the OPS device by screws.

5 Secure the handle using the screws.

Screws for Handle

Screws

for OPS

OPS Cover

Handle

14

PRODUCT DESCRIPTION

1.7 LCD Display Overview

1.7.1 Control Panel

[ ] Up

Move the highlight bar up to select an option

while OSD menu is on.

MENU

• Return to the previous menu while OSD

menu is on.

• Activate the OSD menu when OSD menu is

off.

[

] Down

Move the highlight bar down to select an

option while OSD menu is on.

INPUT

• Choose the input source.

• Used as the SET button while OSD menu

is on.

[

] Increase

• Increase the adjustment or select an option

while OSD menu is on.

• Increase the audio output level while OSD

menu is off.

MUTE

Switch the audio mute ON/OFF.

[

] Power

Turn the display on or put the display to

standby.

1

8

7

6

4

3

2

MUTE

INPUT MENU

1

9

2 3 4 5 6 7 8

[ ] Decrease

• Decrease the adjustment or select an option

while OSD menu is on.

• Decrease the audio output level while OSD

menu is off.

5

Note:

♦ When the Control Panel Lock mode is enabled, all control panel buttons functions will be locked. To

enable or disable the Control Panel Lock mode, press and hold both

and buttons simultaneously for

more than three seconds.

15

PRODUCT DESCRIPTION

Remote control sensor and power status indicator

• Receive command signals from the remote control.

• Indicate the operating status of the display without OPS:

- Lights green when the display is turned on

- Lights red when the display is in standby mode

- Lights amber when the display enters APM mode

- When SCHEDULE is enabled, the light blinks green and red

- If the light blinks red, it indicates that a failure has been detected

- Lights off when the main power of the display is turned off

• Indicate the operating status of the display with OPS:

- Lights green when the display is on, but the OPS is off

- Lights blue when the display and the OPS are on

- Lights red when the display is in standby mode

- Lights amber when the display enters APM mode

- When {SCHEDULE} is enabled, the light blinks green and red

- If the light blinks red, it indicates that a failure has been detected

- Lights off when the main power of the display is turned off

9

16

PRODUCT DESCRIPTION

1.7.2 Input/Output Terminals

AC IN

AC power input from the wall outlet.

DVI IN

DVI-D video input.

HDMI IN

HDMI video/audio input.

RJ-45

LAN control function for the use of remote

control signal from the control center.

IR IN/ IR OUT

IR signal input / output for the loop-through

function.

Note:

♦ This display’s remote control sensor

will stop working if the [IR IN] jack is

connected.

1

3/4

2

7

DisplayPort IN

DisplayPort video input.

Main power switch

Switch the main power on/off.

RS232C IN/ RS232C OUT

RS232C network output / input for the loop-

through function.

DVI OUT / VGA OUT

DVI or VGA video output.

1 2

3 4 5 6 7 8 9 10 12 13 14 15 1611

17

18

19

20

10

5/6

VGA IN (D-Sub)

VGA video input.

12

PC AUDIO IN

Audio input for PC source (3.5mm stereo

phone).

13

COMPONENT IN (BNC)

Component YPbPr video source input.

14

Y/CVBS

Video source input.

15

SPEAKER SWITCH

Select the internal or external speaker.

16

8

9

11

AUDIO IN

Audio input from external AV device (RCA).

17

AUDIO OUT (RCA)

Audio output from the AUDIO IN jack to an

external AV device.

18

EXT. SPEAKER TERMINAL

Audio output to external speakers.

19

OPS SLOT

Slot for installing the optional OPS module.

20

17

PRODUCT DESCRIPTION

1.8 Remote Control

1.8.1 General Functions

POWER

SMART

VIDEO

SOURCE

PIP

INPUTON/OFF CHANGE

BRIGHTNESSCONTRAST

DISPLAY

AUTO

ADJUST

MUTE

VOL UP

VOL DOWN

EXIT

MENU

SET

AUDIO

SOURCE

10

1

2

3

5

6

8

9

7

4

13

11

12

14

15

16

17

19

18

1

[ ]

POWER

Turn the display on or to put the display into

standby mode.

2

[ ] SMART

Activate Smart menu. Press the

button

repeatedly to select the desired option.

• STANDARD: Used for normal images (default

setting).

• HIGH BRIGHT: Used for moving image such

as Video.

• sRGB: Used for text based images (only for

PC mode).

• CINEMA: Used for movies (only for Video

mode).

3

[PIP] (Picture In Picture)

[ON/OFF]: Turn PIP mode ON/OFF.

[INPUT]: Select the input signal for the sub-

picture.

[CHANGE]: Toggle between the main picture and

sub-picture.

4

[CONTRAST]

Sharpen the picture quality. Press the

or

button to adjust the setting.

5

[DISPLAY]

Turn on/off the information OSD displayed on the

upper right corner of the screen.

6

[ ] Left/Decrease

• Decrease the adjustment or select an option

while OSD menu is on.

• Move the selection to the left while OSD menu

is on.

• Move the sub-picture to the left in the PIP

mode.

7

[SET]

Conrm an entry or selection.

8

[AUTO ADJUST]

Execute the Auto Adjust function.

Note:

♦ This function is available only if the input

source is VGA.

9

[MUTE]

Turn the mute function on/off.

Page is loading ...

AG Neovo PN-46D User manual

Related papers

Other documents