Farallon Communications R9100 User manual

Category
Networking
Type
User manual
Netopia
R9100 Ethernet Router
for DSL and Cable Modems
User’s Reference Guide
Copyright
©1997–98, Netopia, Inc., v.0300
All rights reserved. Printed in the U.S.A.
This manual and any associated artwork, software, and product designs are copyrighted with
all rights reserved. Under the copyright laws such materials may not be copied, in whole or
part, without the prior written consent of Netopia, Inc. Under the law, copying includes
translation to another language or format.
Netopia, Inc.
2470 Mariner Square Loop
Alameda, CA 94501-1010
U.S.A.
Patents
PhoneNET technology contained in Netopia is covered by U.S. Patent Numbers 4,901,342
and 5,003,579.
Other U.S. and foreign patents are pending.
Part Number
For additional copies of this electronic manual, order Netopia part number 6120339-PF-03
Printed Copies
For printed copies of this manual, order Netopia part number TER9100/Doc
(P/N 6120339-00-02)
G
B
Part I: Getting Started
Chapter 1Introduction..........................................................1-1
Overview....................................................................... 1-1
Features and capabilities ............................................... 1-1
How to use this guide .................................................... 1-2
Chapter 2Setting Up Internet Services .................................2-1
Finding an Internet service provider................................. 2-1
Unique requirements............................................ 2-1
Pricing and support.............................................. 2-1
Endorsements ..................................................... 2-2
Deciding on an ISP account............................................ 2-2
Setting up an account using a Netopia R9100........ 2-2
Obtaining an IP address........................................ 2-2
SmartIP............................................................... 2-2
Obtaining information from the ISP.................................. 2-2
Local LAN IP address information to obtain............ 2-3
Chapter 3Making the Physical Connections..........................3-1
Find a location............................................................... 3-1
What you need .............................................................. 3-2
Identify the connectors and attach the cables.................. 3-2
Netopia R9100 Ethernet Router back panel ports............ 3-3
Netopia R9100 Ethernet Router status lights................... 3-4
Chapter 4Connecting to Your Local Area Network.................4-1
Overview....................................................................... 4-1
Network Model..................................................... 4-2
Readying computers on your local network....................... 4-4
Welcome to the Netopia R9100 Ethernet Router
User’s Reference Guide
. This guide is designed to
be your single source for information about your Netopia R9100 Ethernet Router. It is intended to
be viewed on-line, using the powerful features of the Adobe Acrobat Reader. The information
display has been deliberately designed to present the maximum information in the minimum space
on your screen. You can keep this document open while you perform any of the procedures
described, and find useful information about the procedure you are performing.
This Table of Contents page you are viewing consists of hypertext links to the chapters and
headings listed. If you are viewing this on-line, just click any link below to go to that heading.
CC
CC
oo
oo
nn
nn
tt
tt
ee
ee
nn
nn
tt
tt
ss
ss
ii User’s Reference Guide
Connecting to an Ethernet network.................................. 4-5
10Base-T............................................................. 4-5
Adding an external modem ............................................. 4-7
Connecting to a LocalTalk network ................................. 4-8
Wiring guidelines for PhoneNET cabling.................. 4-9
Chapter 5Setting up your Router with the SmartStart Wizard5-1
Before running SmartStart............................................. 5-2
Setting up your Router with the SmartStart Wizard........... 5-3
SmartStart Wizard configuration screens............... 5-3
Easy option.......................................................... 5-4
Advanced option .................................................. 5-5
Sharing the Connection.................................................. 5-6
Configuring TCP/IP on Windows 95, 98, or NT
computers........................................................... 5-6
Configuring TCP/IP on Macintosh computers........ 5-10
Chapter 6Console-Based Management.................................6-1
Connecting through a Telnet session............................... 6-2
Configuring Telnet software................................... 6-3
Connecting a console cable to your router ....................... 6-3
Navigating through the console screens .......................... 6-4
Chapter 7Easy Setup...........................................................7-1
Easy Setup console screens........................................... 7-1
Accessing the Easy Setup console screens............ 7-1
Quick Easy Setup connection path .................................. 7-3
If your ISP supports DHCP .................................... 7-3
If your ISP doesn’t support DHCP.......................... 7-3
More Easy Setup options ............................................... 7-5
WAN Ethernet Configuration .................................. 7-5
IP Easy Setup ...................................................... 7-6
Easy Setup Security Configuration ......................... 7-7
Contents iii
G
Part II: Advanced Configuration
Chapter 8WAN and System Configuration .............................8-1
WAN configuration.......................................................... 8-1
Creating a new Connection Profile................................... 8-3
Default Answer Profile for Dial-in Connections .................. 8-7
How the Default Answer Profile works.................... 8-7
System configuration screens ........................................ 8-9
Navigating through the system configuration screens...... 8-10
System configuration features............................. 8-11
Network protocols setup..................................... 8-11
Filter sets (firewalls)........................................... 8-12
IP address serving ............................................. 8-12
Date and time.................................................... 8-12
Console configuration......................................... 8-12
SNMP (Simple Network Management Protocol)..... 8-13
Security............................................................. 8-13
Upgrade feature set ........................................... 8-13
Logging ............................................................. 8-14
Installing the Syslog client .................................. 8-14
Chapter 9IP Setup and Network Address Translation ............9-1
Network Address Translation features ............................. 9-1
Using Network Address Translation ................................. 9-3
Associating port numbers with nodes.................... 9-5
Network Address Translation guideline................... 9-5
IP setup........................................................................ 9-6
IP subnets......................................................... 9-10
Static routes...................................................... 9-12
IP address serving....................................................... 9-16
IP Address Pools................................................ 9-19
DHCP NetBIOS Options....................................... 9-21
MacIP (KIP forwarding) setup .............................. 9-23
iv User’s Reference Guide
Chapter 10IPX Setup.........................................................10-1
IPX features ................................................................ 10-1
IPX definitions ............................................................. 10-1
Internetwork Packet Exchange (IPX) ..................... 10-1
IPX address....................................................... 10-2
Socket .............................................................. 10-2
Routing Information Protocol (RIP) ....................... 10-2
Service Advertising Protocol (SAP)....................... 10-2
NetBIOS............................................................ 10-3
IPX spoofing....................................................... 10-3
IPX setup screen ......................................................... 10-3
IPX routing tables ........................................................ 10-5
Chapter 11AppleTalk Setup................................................11-1
AppleTalk networks...................................................... 11-1
AppleTalk protocol.............................................. 11-1
MacIP................................................................ 11-3
AURP................................................................. 11-3
Routers and seeding .......................................... 11-3
Installing AppleTalk...................................................... 11-4
Configuring AppleTalk................................................... 11-6
EtherTalk setup.................................................. 11-6
LocalTalk setup ................................................. 11-7
AURP setup ....................................................... 11-8
Chapter 12Monitoring Tools...............................................12-1
Quick View status overview .......................................... 12-1
General status................................................... 12-2
Status lights...................................................... 12-2
Statistics & Logs......................................................... 12-3
General Statistics .............................................. 12-4
Event histories ............................................................ 12-5
Routing tables............................................................. 12-7
Served IP Addresses.................................................. 12-10
Contents v
G
System Information.................................................... 12-12
SNMP....................................................................... 12-12
The SNMP Setup screen................................... 12-13
SNMP traps..................................................... 12-14
SmartView ................................................................ 12-16
SmartView overview ........................................ 12-16
Navigating SmartView....................................... 12-16
General Machine information page.................... 12-17
Event history pages.......................................... 12-17
Standard HTML web-based monitoring pages ..... 12-19
Chapter 13Security ...........................................................13-1
Suggested security measures....................................... 13-1
User accounts............................................................. 13-1
Dial-in console access.................................................. 13-3
Enable SmartStart/SmartView/Web server................... 13-4
Telnet access.............................................................. 13-4
About filters and filter sets ........................................... 13-4
What’s a filter and what’s a filter set?.................. 13-4
How filter sets work............................................ 13-5
How individual filters work................................... 13-7
Design guidelines............................................. 13-11
Working with IP filters and filter sets............................ 13-12
Adding a filter set............................................. 13-13
Viewing filter sets............................................. 13-16
Modifying filter sets.......................................... 13-17
Deleting a filter set........................................... 13-17
A sample IP filter set........................................ 13-17
IPX filters .................................................................. 13-21
IPX packet filters.............................................. 13-22
IPX packet filter sets ........................................ 13-23
IPX SAP filters.................................................. 13-25
IPX SAP filter sets ............................................ 13-27
vi User’s Reference Guide
Firewall tutorial.......................................................... 13-29
General firewall terms ...................................... 13-29
Basic IP packet components............................. 13-29
Basic protocol types......................................... 13-29
Firewall design rules......................................... 13-30
Filter basics..................................................... 13-32
Example filters................................................. 13-33
Chapter 14Utilities and Diagnostics...................................14-1
Ping............................................................................ 14-2
Trace Route................................................................. 14-4
Telnet client................................................................. 14-5
Disconnect Telnet console session ............................... 14-6
Factory defaults........................................................... 14-6
Transferring configuration and firmware files with TFTP.... 14-6
Updating firmware.............................................. 14-7
Downloading configuration files ........................... 14-8
Uploading configuration files ............................... 14-9
Transferring configuration and firmware files with
XMODEM..................................................................... 14-9
Updating firmware............................................ 14-10
Downloading configuration files ......................... 14-11
Uploading configuration files ............................. 14-11
Restarting the system................................................ 14-12
Part III: Appendixes
Appendix ATroubleshooting..................................................A-1
Configuration problems .................................................. A-1
Console connection problems ............................... A-2
Network problems................................................ A-2
How to reset the router to factory defaults ...................... A-3
Power outages............................................................... A-3
Technical support .......................................................... A-4
Contents vii
G
How to reach us................................................... A-4
Appendix BUnderstanding IP Addressing ..............................B-1
What is IP?.................................................................... B-1
About IP addressing....................................................... B-1
Subnets and subnet masks .................................. B-2
Example: Using subnets on a Class C IP internet.... B-3
Example: Working with a Class C subnet................ B-5
Distributing IP addresses ............................................... B-5
Technical note on subnet masking......................... B-6
Configuration ....................................................... B-7
Manually distributing IP addresses ........................ B-8
Using address serving.......................................... B-8
Tips and rules for distributing IP addresses............ B-9
Nested IP subnets....................................................... B-11
Broadcasts.................................................................. B-13
Packet header types........................................... B-13
Appendix CUnderstanding Netopia NAT Behavior...................C-1
Network configuration..................................................... C-1
Background................................................................... C-1
Exported services ................................................ C-5
Important notes................................................... C-6
Configuration................................................................. C-7
Summary...................................................................... C-8
Appendix DBinary Conversion Table......................................D-1
Appendix EFurther Reading..................................................E-1
Appendix FTechnical Specifications and Safety Information...F-1
Pinouts for Auxiliary port modem cable............................ F-1
Description.................................................................... F-2
Power requirements ............................................. F-2
Environment ........................................................ F-2
Software and protocols......................................... F-3
viii User’s Reference Guide
Agency approvals........................................................... F-3
Regulatory notices ............................................... F-3
Important safety instructions ................................ F-4
Glossary..................................................................................GL-1
Index ..................................................................................Index-1
Limited Warranty and Limitation of Remedies ................................1
PP
PP
aa
aa
rr
rr
tt
tt
II
II
::
::
GG
GG
ee
ee
tt
tt
tt
tt
ii
ii
nn
nn
gg
gg
SS
SS
tt
tt
aa
aa
rr
rr
tt
tt
ee
ee
dd
dd
User’s Reference Guide
Introduction 1-1
CC
CC
hh
hh
aa
aa
pp
pp
tt
tt
ee
ee
rr
rr
11
11
II
II
nn
nn
tt
tt
rr
rr
oo
oo
dd
dd
uu
uu
cc
cc
tt
tt
ii
ii
oo
oo
nn
nn
Overview
The Netopia R9100 Ethernet Router is a full-featured, stand-alone, multiprotocol broadband router for
connecting diverse local area networks (LANs) to the Internet and other remote networks. Combining the
Netopia R9100 with a cable or DSL modem provides businesses with a low-cost connection to the Internet
while retaining the power of a router. Once your Netopia R9100 Ethernet Router is connected to your computer
and an Internet connection device such as a cable or a DSL modem, and your account is activated by your
network service provider, you will have a high-speed connection between your PC or LAN and the telephone
company’s network of high-speed digital facilities.
This section covers the following topics:
“Features and capabilities” on page 1-1
“How to use this guide” on page 1-2
Features and capabilities
The Netopia R9100 Ethernet Router provides the following features:
Continuous-availability networking eliminates dialing and provides lower, more predictable transmission
costs.
Interconnects with most cable modems or DSL modems or bridges that have an Ethernet port.
8 port Ethernet hub
Connectivity to support Ethernet LANs via built-in 8 port 10Base-T hub with uplink port.
Status lights (LEDs) for easy monitoring and troubleshooting.
Support for IP routing for Internet and intranet connectivity.
IP address serving over Ethernet (or a WAN link via dynamic WAN client serving via the Auxiliary port with
optional dial-in kit) that allows local or remote network nodes to acquire an IP address automatically and
dynamically from a designated pool of available addresses.
Support for console-based management over Telnet or serial cable connection.
Support for remote configuration by your reseller, your network administrator, or technicians at Netopia,
Inc. via external modem or via IP network.
Wall-mountable, bookshelf (side-stackable), or desktop-stackable design for efficient space usage.
SmartIP™, combining NAT and DHCP makes it simple and economical to connect a workgroup of users to
the Internet or a remote IP network by using Network Address Translation and a single IP address.
1-2 User’s Reference Guide
Analog dial-in using an external modem connected to the Auxiliary port. (Available as a separate add-on kit;
order TER/AD1.)
AppleTalk support (available as a separate add-on AppleTalk kit (order TER/AT1), including a firmware
feature set enhancement and custom HD-15 dual RJ-11 PhoneNET® connector) allows for LocalTalk to
Ethernet routing, assigning IP addresses to Macintosh users, IP functionality for LocalTalk users, and AURP
tunneling for connectivity between remote AppleTalk networks.
SmartView tool allows for real-time monitoring of router status lights (LEDs), through one or more
information forms on a Web-based Java applet. Internet browsers such as Netscape Navigator and
Microsoft’s Internet Explorer can be used for SmartView.
How to use this guide
This guide is designed to be your single source for information about your Netopia R9100 Ethernet Router. It is
intended to be viewed on-line, using the powerful features of the Adobe Acrobat Reader. The information display
has been deliberately designed to present the maximum information in the minimum space on your screen. You
can keep this document open while you perform any of the procedures described, and find useful information
about the procedure you are performing.
If you prefer to work from hard copy rather than on-line documentation, you can also print out all of the manual,
or individual sections. The pages are formatted to print on standard 8 1/2 by 11 inch paper. We recommend
that you print on three-hole punched paper, so you can put the pages in a binder for future reference. For your
convenience, a printed copy can be purchased from Netopia. Order part number TER9100/Doc.
This guide is organized into chapters describing the Netopia R9100’s advanced features. You may want to read
each chapter’s introductory section to familiarize yourself with the various features available.
Use the guide’s table of contents and index to locate informational topics.
Setting Up Internet Services 2-1
CC
CC
hh
hh
aa
aa
pp
pp
tt
tt
ee
ee
rr
rr
22
22
SS
SS
ee
ee
tt
tt
tt
tt
ii
ii
nn
nn
gg
gg
UU
UU
pp
pp
II
II
nn
nn
tt
tt
ee
ee
rr
rr
nn
nn
ee
ee
tt
tt
SS
SS
ee
ee
rr
rr
vv
vv
ii
ii
cc
cc
ee
ee
ss
ss
This chapter describes how to obtain and set up Internet services.
This section covers the following topics:
“Finding an Internet service provider” on page -1
“Deciding on an ISP account” on page -2
“Obtaining information from the ISP” on page -2
Finding an Internet service provider
Internet access is available from Internet Service Providers (ISPs). Typically, there are several ISPs in each
area. To locate ISPs in your area, consult your telephone book, local computer magazines, the business section
of a local newspaper, or the following URL on the Internet: ‘http://thelist.internet.com’. Also see Netopia’s
home page at ‘http://www.netopia.com’ for a list of ISPs with special programs and promotions for Netopia
customers.
You could select a cable television company that offers cable modem service as an ISP. Another alternative
could be a traditional ISP that partners with a Competitive Local Exchange Carrier (CLEC) telephone service
provider to provide a Digital Subscriber Line (DSL).
ISPs typically support Internet connection devices compatible with their service. So-called “cable modems” are
an example of such devices. You should choose the connection device that your chosen ISP supports, or you
could choose an ISP based on the type of device and connection you prefer.
Most most cable and DSL modems have a 10Base-T Ethernet connection port for connecting a PC. The Netopia
R9100 Ethernet Router uses this connection port to connect all the computers on your LAN to the Internet.
If your area has more than one ISP, the following considerations will help you decide which ISP is best suited for
your requirements.
Unique requirements
Make sure the ISP can meet any unique requirements you may have, such as:
Dynamic or static IP addressing
Custom domain name
Multiple e-mail addresses
Web site hosting
Pricing and support
Compare pricing, service, and technical support service among various ISPs.
2-2 User’s Reference Guide
Endorsements
Consider recommendations from colleagues and reviews in publications.
Deciding on an ISP account
Your ISP may offer various Internet access account plans. Typically, these plans vary by usage charges and the
number of host IP addresses supplied. Evaluate your networking needs and discuss them with your ISP before
deciding on a plan for your network.
The following checklist is a guide to ensure that you obtain the Internet service you require.
Setting up an account using a Netopia R9100
Check whether your ISP has the Netopia R9100 on its list of supported products that have been tested with a
particular configuration. If the ISP does not have the Netopia R9100 on such a list, describe the Netopia R9100
in as much detail as needed, so your ISP account can be optimized. As appropriate, refer your ISP to Netopia’s
Web site www.netopia.com for more information or call us at 1-800-NETOPIA. Our representative can call your
ISP and introduce them to the product. As necessary, we can provide them with the technical background they
need to support the product.
Obtaining an IP address
Typically, each network computer that requires Internet access requires its own unique IP address.
Consider expected growth in your network when deciding on the number of addresses to obtain. Alternatively,
you can use the Network Address Translation and DHCP features of SmartIP.
If some or all of your networked computers require simultaneous Internet access, and you don’t want to use
DHCP, obtain a block of IP host addresses large enough for each computer to have its own address, plus one
for the Netopia R9100.
SmartIP
The Netopia R9100 Ethernet Router supports the SmartIP™ feature, which includes Network Address
Translation.
Network Address Translation provides Internet access to the network connected to the Netopia R9100 using
only a single IP address. These routers translate between the internal or local area network (LAN) addresses
and a single external IP address, and route accordingly.
For more information on Network Address Translation, see Chapter 9, “IP Setup and Network Address
Translation.”
Obtaining information from the ISP
After your account is set up, the ISP should send you the IP parameter information that will help you configure
the Netopia R9100.
Setting Up Internet Services 2-3
Local LAN IP address information to obtain
Your ISP will need to provide you with the following information:
The default gateway IP address
Remote IP address
Local WAN IP address and subnet mask
Primary and secondary domain name server (DNS) IP addresses
Domain name (usually the same as the ISP’s domain name unless you have registered for your own
individual domain name)
Refer to the section “Quick Easy Setup connection path” on page 7-3 for a handy worksheet.
Note:
The default gateway, WAN address and mask, DNS, and domain name are all obtainable via WAN DHCP,
if your ISP supports it.
With Network Address Translation
If you are using SmartIP (NAT), you should obtain the following:
If you are connecting to a remote site using Network Address Translation on your router, your provider will
not define the IP address information on your local LAN. You can define this information based on an IP
configuration that may already be in place for the existing network. Alternatively, you can use the default IP
address range used by the router, where 192.168.1.1 is the default IP address of the router.
Without Network Address Translation
If you are
not
using Network Address Translation, you will need to obtain all of the local LAN IP address
information from your ISP and you will need to pay for an IP address for each device on the network.
If you are not using SmartIP (NAT), you should obtain:
The Ethernet IP address for your Netopia R9100
The Ethernet IP subnet mask for your Netopia R9100
An IP address for each device on your network, in the same network range as the Netopia R9100.
2-4 User’s Reference Guide
Making the Physical Connections 3-1
CC
CC
hh
hh
aa
aa
pp
pp
tt
tt
ee
ee
rr
rr
33
33
MM
MM
aa
aa
kk
kk
ii
ii
nn
nn
gg
gg
tt
tt
hh
hh
ee
ee
PP
PP
hh
hh
yy
yy
ss
ss
ii
ii
cc
cc
aa
aa
ll
ll
CC
CC
oo
oo
nn
nn
nn
nn
ee
ee
cc
cc
tt
tt
ii
ii
oo
oo
nn
nn
ss
ss
This section tells you how to make the physical connections to your Netopia R9100 Ethernet Router. This
section covers the following topics:
“Find a location” on page 3-1
“What you need” on page 3-2
“Identify the connectors and attach the cables” on page 3-2
“Netopia R9100 Ethernet Router back panel ports” on page 3-3
“Netopia R9100 Ethernet Router status lights” on page 3-4
Find a location
When choosing a location for the Netopia Router, consider:
Available space and ease of installation
Physical layout of the building and how to best use the physical space available for connecting your Netopia
Router to the LAN
Available wiring and jacks
Distance from the point of installation to the next device (length of cable or wall wiring)
Ease of access to the front of the unit for configuration and monitoring
Ease of access to the back of the unit for checking and changing cables
Cable length and network size limitations when expanding networks
For small networks, install the Netopia R9100 near one of the LANs. For large networks, you can install the
Netopia R9100 in a wiring closet or a central network administration site. In most cases the router will be near
the cable or DSL modem which is near the cable or DSL wall outlet. You could route a line from the wall outlet
to a wiring closet if you store the modem and router there.
3-2 User’s Reference Guide
What you need
Locate all items that you need for the installation.
Included in your router package are:
The Netopia R9100 Ethernet Router
A power adapter and cord with a mini-DIN8 connector
Two RJ-45 cables (one for the Ethernet port on your PC; one for the Line port on the router)
A dual DB-9 and mini-DIN8 to DB-9 console cable (for a PC or a Macintosh)
The Netopia CD containing an Internet browser, Adobe Acrobat Reader for Windows and Macintosh, ZTerm
terminal emulator software and NCSA Telnet for Macintosh, and documentation
You will need:
A Windows 95, 98, or NT–based PC or a Macintosh computer with Ethernet connectivity for configuring the
Netopia R9100. This may be built-in Ethernet or an add-on card, with TCP/IP installed and configured. See
“Hardware and operating system requirements” on page 3-1.
An Internet modem such as a cable modem or DSL bridge connected to the appropriate wall outlet for your
Internet service source. Your Internet connection device must have a 10 Base-T Ethernet port for
connecting it to the router’s Line port.
Identify the connectors and attach the cables
Identify the connectors and switches on the back panel and attach the necessary Netopia Router cables.
The figure below displays the back of the Netopia R9100 Ethernet Router.
Netopia R9100 Ethernet Router back panel
1. Connect the mini-DIN8 connector from the power adapter to the power port, and plug the other end into an
electrical outlet.
2. Connect one end of one of the RJ-45 cables to the Line 1 port (not the Line 2 port), and the other end to
your Internet modem’s Ethernet port. DO NOT CONNECT IT DIRECTLY TO A TELCO LINE OUTLET.
Ethernet
Normal
Auxiliary Console Power
Line 1
8 port Ethernet hub
Crossover switch
Line 1 port
Auxiliary port
Console port
Power port
8
1
1
Uplink
Line 2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244

Farallon Communications R9100 User manual

Category
Networking
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI