K97
© 2008 AS America Inc.
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
254mm
(10)
660mm
(26)
C/L OF OUTLET
79mm
(3-1/8)
FINISHED WALL
184mm
(7-1/4)
19mm ± 6mm
(3/4 ± 1/4)
381mm
(15)
419mm
(16-1/2)
C/L
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
308mm
(12-1/8)
159mm
(6-1/4)
16mm
(5/8)
FINISHED
FLOOR
743mm
(29-1/4)
235mm
(9-1/4)
152mm
(6)
508mm
(20)
203mm
(8)
SUPPLY
AS
REQ'D
365mm
(14-3/8)
*
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: American Standard #5322.011 “Rise and
Shine” solid plastic closed front seat with cover.
❏ Seat: American Standard #5308.014 “Laurel”
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
COLONY™
ROUND FRONT 10" ROUGH-IN TOILET
VITREOUS CHINA
COLONY™ ROUND FRONT
10" ROUGH-IN TOILET
❑ 2388.010
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 10" roughing-in
• Round front siphon action jetted bowl
• Fully glazed 2" trapway
• American Standard Aquameter™ Water Control
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory ush tested
❑ 3338.012 Bowl
❑ 4310.016 Tank
Nominal Dimensions:
660 x 508 x 743mm
(26" x 20" x 29-1/4")
Fixture only, seat and supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
Revised 2/08