American Standard 4314.016 User manual

Type
User manual
K98
© 2008 AS America Inc.
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 356MM (14") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
356mm
(14)
762mm
(30)
C/L OF OUTLET
143mm
(5-5/8)
FINISHED WALL
286mm
(11-1/4)
19mm ± 6mm
(3/4 ± 1/4)
381mm
(15)
419mm
(16-1/2)
C/L
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
308mm
(12-1/8)
159mm
(6-1/4)
16mm
(5/8)
FINISHED
FLOOR
743mm
(29-1/4)
235mm
(9-1/4)
152mm
(6)
524mm
(20-5/8)
203mm
(8)
SUPPLY
AS
REQ'D
365mm
(14-3/8)
*
To Be Specied:
Color: White Bone Linen
Seat: American Standard #5322.011 “Rise and
Shine” solid plastic closed front seat with cover.
Seat: American Standard #5308.014 “Laurel
molded closed front seat with cover.
Alternate Seat:
Supply with stop:
COLONY
ROUND FRONT 14" ROUGH-IN TOILET
VITREOUS CHINA
COLONY™ ROUND FRONT
14" ROUGH-IN TOILET
2388.014
Vitreous china
Low-consumption (6.0 Lpf/1.6 gpf)
14" roughing-in
Round front siphon action jetted bowl
Fully glazed 2" trapway
American Standard Aquameter™ Water Control
Color-matched trip lever
Sanitary bar on bowl
2 bolt caps
100% factory ush tested
3338.012 Bowl
4314.016 Tank
Nominal Dimensions:
762 x 524 x 743mm
(30" x 20-5/8" x 29-1/4")
Fixture only, seat and supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
Revised 2/08
  • Page 1 1

American Standard 4314.016 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI