2. American Standard
  3. Colony FitRight Right Height Elongated 10" Rough-In Toilet 2487.010

American Standard Colony FitRight Right Height Elongated 10" Rough-In Toilet 2487.010 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard Colony FitRight Right Height Elongated 10" Rough-In Toilet 2487.010 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
2
© 2008 AS America Inc.
COLONY™ FitRight™ RIGHT HEIGHT™
ELONGATED 10" ROUGH-IN TOILET
VITREOUS CHINA

NN

NN

NN

NN

NN

NN

NN

NN

NNNN

NN
'*/*4)&%
8"--
'*/*4)&%
'-003

NN

NN

NN
$-0'4&"51045)0-&4
NN$&/5&34
NN

4611-:
"4
3&2h%
NN

$-0'065-&5
NN

To Be Specied:
❏ Color: ❏ White
❏ Seat: American Standard #5324.09 “Rise and
Shine" solid plastic closed front seat with cover.
❏ Seat: American Standard #53.02 “Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 254MM (0") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A2.9.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
COLONY™ FitRight™ RIGHT HEIGHT™
ELONGATED 10" ROUGH-IN TOILET
❑ 2487.010
• Vitreous china
• Low-consumption (6.0 Lpf/.6 gpf)
• 6-/2" rim height for accessible applications
• 0" roughing-in
• Elongated siphon action jetted bowl
• Fully glazed 2" trapway
• Pilot valve water control
• 2" Flapper ush valve
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 00% factory ush tested
❑ 3191.016 Bowl
❑ 4006.016 Tank
Nominal Dimensions:
673 x 457 x 778mm
(26-/2" x 8" x 30-5/8")
Fixture only, seat and supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A2.9.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specication for
Non-Adjustability
8/08
/