Julian Bowen UP10114 Assembly Instructions

Type
Assembly Instructions
Julian Bowen Limited
Chunky
Bunk Bed 90cm
Assembly Instructions
Version 160217
IMPORTANT - READ CAREFULLY - RETAIN
FOR FUTURE REFERENCE
03
HARDWARE
A
4x
B
16x
C
16x
D
6x
E
20x
J
2x
PARTS
1
01
1
01
1
03
1
02
1
04
1
04
1
05
1
05
1
06
1
06
1
07
1
07
1
08
1
09
1
10
1
10
1
11
1
11
1
12 12x
F
62x
G
4x
H
4x
I
1x
1
11
1
11
1
12 12x
L
10x
1
10
04
W ARNING High Beds and the upper bed of bunk beds are not suitable for children
under six years due to the risk of injury from falls.
W ARNING Bunk beds and high beds can present a serious risk of injury from
strangulation if not used correctly. Never attach or hang items to any part of the bunk
bed that are not designed to be used with the bed, for example, but not lim ited to
ropes, strings, cords, hooks, belts and bags.
W ARNING Children can become trapped between the bed and the wall, a roof pitch,
the ceiling, adjoining pieces of furniture (e.g. cupboards) and the like. To avoid risk of
serious injury the distance between the top safety barrier and the adjoining structure
shall not exceed 75mm or shall be more than 230m m .
W ARNING Do not use the bunk bed/high bed if any structural part is broken or
missing.
It is recomm ended that you always follow the manufacturers instructions to assem ble
this product.
Always follow the manufacturers recom mended mattress size, as per these
instructions and the bunk bed / high bed m aximum mattress height marking on the
item (185mm).
It is necessary to frequently ventilate the room in order to keep the hum idity low and
to prevent mold in and around the bed.
Please periodically check all the fixings of the item and re-tighten when necessary.
This item conform s to European Safety Standards BS EN 747-1: 2012 + A1:2015.
Maximum height
of mattress
Distributed by :
Distributed by :
Julian Bowen Limited
Julian Bowen Limited
Bennck House,
Bennck House,
Park Lane Business Park,
Park Lane Business Park,
Kirkby-in-Ashfield,
Kirkby-in-Ashfield,
Nos, NG17 9LE
Nos, NG17 9LE
WARNING: This upper bed is not suitable for children under six years
WARNING: This upper bed is not suitable for children under six years
CERTIFICATION LABEL
CERTIFICATION LABEL
This bunk bed model has been tested
This bunk bed model has been tested
by an independent laboratory and is in
by an independent laboratory and is in
compliance with BS EN 747-1:2012 +
compliance with BS EN 747-1:2012 +
A1:2015 - Standard Consumer Safety
A1:2015 - Standard Consumer Safety
Specificaon For Bunk Beds & High
Specificaon For Bunk Beds & High
Beds
Beds
Date of Manufacture: January 2016
Date of Manufacture: January 2016
Factory ID: Manufactured in Brazil
Factory ID: Manufactured in Brazil
CHUNKY BUNK BED
CHUNKY BUNK BED
Product Code: UP10114
Product Code: UP10114
IMPORTANT INFORMATION
05
103.2cm
205.6cm
150.7cm
3
1
06
B
20x
B
B
BB
BB
B
BB
2x
2x
2x
1
05
1
05
1
06
1
07
B
B
B
1
04
3
07
2
C
C
C
D
CD
D
E
E
E
E04
05
06
06
03
02
4x
E
I
C
D
D
D
1
04
1
05
1
01
1
01
D
C
C
C
C
D
D
D
D
C
C
C
8x
D
C
I
D
C
D
C
I
D
C
8x
C
D
C
C
D
C
D
D
D
4
Place the slats onto the side rail supports and distribute
evenly using the spacer provided. Attach the centre slat first,
as shown in the diagram, by first pushing the side rails together
until the slat is flush against the side rail, before inserting the screws.”
F
2x
F
F
1
12
84.5cm
98.5cm
J
F
F
26x
5
08
F
F
F
F
F
FF
F
F
F
FF
F
F
F
F
F
F
F
F
F
F
F
F
FFF
1
12
1
12
11X
11X
J
J
1
11
1
11
1
11
1
11
F
6
09
7F
F
F
F
F
F
F
F
F
F
1
12 11X
J
F
F
F
1
11
1
11
F
F
F
2x
84.5cm
98.5cm
1
12
F
F
F
F
F
F
F
F
F
F
F
F
J
F
Place the slats onto the side rail supports and distribute
evenly using the spacer provided. Attach the centre slat first,
as shown in the diagram, by first pushing the side rails together
until the slat is flush against the side rail, before inserting the screws.”
J
F
F
26x
F
8
10
L
L
L
L
L
L
A
L
L4x
8x
11
10
GH
GH
GH
GH
G
H
4x
9
09
08
10
10
6x
F
F
F
F
F
F
F
10
11
12
L
L
E
E
2x
E
I
L
1
07
1
07
2x
13
General Care
Recommendations
Periodical re-tightening of fixings.
Warning
This unit is heavy. Please use an assistant when lifting.
Notes
Wipe clean with a slightly damp soft cloth.
Avoid the use of all household cleaners and abrasives.
When moving your furniture, carefully lift into place.
Never drag or push the pieces across the floor as this
will cause damage to the joints and could result in failure
to the product that will invalidate the warranty.
We’ve tried to make this piece of furniture as easy to
assemble as possible. .
In the unlikely event that you have problems putting
it together or have damaged or missing pieces, please
contact our customer services on 01623 727374.
Julian Bowen Limited
Bentinck House, Park Lane Business Park, Kirkby-in-Ashfield,
Notts, NG17 9LE - www.julian-bowen.co.uk
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Julian Bowen UP10114 Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI