Julian Bowen Limited Blenheim Velvet Wing Bed Assembly Instructions Manual

Type
Assembly Instructions Manual
Julian Bowen Limited
Blenheim Velvet Wing Bed - 135cm
Assembly Instructions
VERSION: 161220
02
No Extra Tool
Required
PARTS
03
1
2
3
3
4
5
8
7
6
9
10
10
10
9
1x
G
1x
H
11x
F
6x
I
HARDWARE
34x
B
D
M8 x 50mm
3x
E
M8 x 80mm
8x
A
M8 x 25mm
12x
C
M8 x 40mm
4x
A x 8pcs & B x 8pcs already
attached to Bed end Part 1&2
11
12
J
Threaded rod
4x
S a f e t y A d v i c e
Please take the time to carefully read through the whole
of these instructions before you commence.
Keep these instructions for future reference.
Unpack, inspect and check off all of the contents.
Please dispose of all packaging safely.
Small component parts could choke a child if swallowed.
We strongly recommend that you keep children well away
from the work area.
It would be sensible to lay a sheet or blanket on the floor
where you intend to work to avoid scratching this product
and to protect your floor.
This product is heavy. Take extreme care when lifting to
avoid personal injury or damage to the product.
Assemble the product as close to its intended final position
in the room as possible.
HANDY HINT: If you keep the hardware in a bowl during
assembly you will be less likely to lose them.
04
05
E
G
B
10
1
2
8x
1
2
10
10
10
10
4x
I
10
1
2
B
F
B
F
4x
Back View
12
11
11
12
J
1
1
2
J
4x
12
11
1
G
A
4x
4
A
8x
B
G
3
06
3
3
3
4
2
2
1
3
3
4
2
2
1
G
D
B
B
F
H
5
3x
9
9
5
4
C
4x
G
B
B
F
4
9
H
I
2x
Urgent Warning
When correctly adjusted the centre support legs on this product should be raised by 5mm from
the floor with the added weight of the mattress and bedding.
If the bed is to be moved, carefully lift the product rather than dragging to ensure that the centre
legs do not become twisted and buckle.
This bed may fail if it is used on a wooden floor WITHOUT the use of non slip pads on all support
legs and bed posts
5
06
39x
8
6
7
07
G e n e r a l C a r e
Wipe clean with a slightly damp soft cloth.
Avoid the use of all household cleaners and abrasives.
When moving your furniture, carefully lift into place.
Never drag or push the pieces across the floor as this
will cause damage to the joints and could result in failure to
the product that will invalidate the warranty.
R e c o m m e n d a t i o n s
Periodical re-tightening of fixings.
W a r n i n g
This unit is heavy. Please use an assistant when lifting.
N o t e s
Weʹve tried to make this piece of furniture as easy to
assemble as possible.
In the unlikely event that you have problems putting
it together or have damaged or missing pieces,
please contact our customer services on 01623 727374
Julian Bowen Limited
Bentinck House, Park Lane Business Park, Kirkby-in-Ashfield, Notts, NG17 9LE
www.julian-bowen.co.uk
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Julian Bowen Limited Blenheim Velvet Wing Bed Assembly Instructions Manual

Type
Assembly Instructions Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI