Donco 1001 Assembly Instructions

Donco
Brand
Donco
Model
1001
Type
Assembly Instructions
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Speciļ¬cation For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : #MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
1001 TWIN CIRCLESTWIN
BUNK BED
TO OBTAIN PARTS, PLEASE CONTACT: DONCO TRADING COMPANY - FORT WORTH, TEXAS
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Speciļ¬cation For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
1001 TWIN TWIN CIRCLES BUNK BED
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing
material carefully for small parts which may have come loose inside the
carton during shipment. Separate, identify and count all parts and hardware.
Compare with the parts list to be sure all parts are present.
"DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED"
IMPORTANT:
PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY
* Use of power tool to assemble this
product will invalidate any claim and
damage this product making unsafe !!!
* Please assemble on a clean soft
surface to avoid damage.
!
Tools Required
(Not included)
+
1
2
3
4
5
6
7
8
9
10
11 12
(Not included)
Fort , Texas 76140Worth
1:00 h
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
4,0 x 30 Screw
Qty
H25
Qty
F02
Identifying the Hardware-Identify the hardware using the illustrations below.
B24
Qty
14
10 x 40 Wood Dowel
1/4 x 0 Screw101/4 x 0 Screw10
7,0 x100 Screw
15 Wood Dowelx10015 Wood Dowelx100
D
G
A
Qty
16
Qty
Qty
Half Moon
06
04
EQty
1/4" 16
C
Qty
7,0 x 50 Screw
Part List - 1001 Twin Twin Circles Bunk Bed
Hook Ladder
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Speciļ¬cation For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
Hex Screwdriver
Qty
J01
3
4
2
6
8
87
9
9
10
10
11
12
13
13
13
13
13
9
6
2
2
5
1
1
Qty
06
3,5 x 20 Screw
I
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
KQty
02
01
02
TOP SIDE FRONT WITH HOLES
X3
X2
X2
X5
B
BOTTOM BED
24
10 x 40 Wood Dowel
Qty
15 Wood Dowelx10015 Wood Dowelx100
AQty
04
1/4 x 0 Screw101/4 x 0 Screw10
DQty
08
Half Moon
EQty
1/4" 08 Hex Screwdriver
JQty
01
B
B
BB
E
E
E
E
E
E
A
A
A
J
D
D
D
D
D
D
D
D
D
D
A
E
B
B
B
B
B
E
E
2
2
2
5
6
8
13
1
1
Hex Screwdriver
Qty
J01
1/4 x 0 Screw101/4 x 0 Screw10
DQty
08
Half Moon
EQty
1/4" 08 7,0 x100 Screw
GQty
04
03
04
4,0 x 30 Screw
Qty
H08
H
H
H
H
H
H
H
D
D
D
E
E
E
E
E
E
D
D
G
G
G
D
D
D
J
E
E
G
J
FRONT
H
The rst slats must be xed atfi fi
3ā€ from each headboard end.
!
SIDE-RAIL
LSAT
``INSTALL SLAT KIT WITH SPACER
TAPE ON TOP (FACING UP)``
10
2
5
6
6
3
4
TOP BED
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Speciļ¬cation For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Speciļ¬cation For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Speciļ¬cation For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
05
06
7,0 x100 Screw
GQty
02
Qty
02
C7,0 x 50 Screw
Qty
02
C7,0 x 50 Screw
Hex Screwdriver
Qty
J01
Hex Screwdriver
Qty
J01
G
C
C
C
C
G
G
J
8
8
7
J
J
C
C
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Speciļ¬cation For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
07
08
4,0 x 30 Screw
4,0 x 30 Screw
Qty
Qty
H
H
08
09
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
The rst slats must be xed atfi fi
3ā€ from each headboard end.
!
SIDE-RAIL
LSAT
``INSTALL SLAT KIT WITH SPACER
TAPE ON TOP (FACING UP)``
10
9
9
9
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
PREDRILLED
MARKS
Hook Ladder
Qty
F02
3,5 x 20 Screw
IQty
04
09
10 Qty
10
C7,0 x 50 Screw Hex Screwdriver
Qty
J01
C
C
C
C
C
C
J
C
C
C
C
C
F
F
I
I
I
I
11
12
13
13
13
13
13
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Speciļ¬cation For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
KQty
02
F
K
LADDER
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Speciļ¬cation For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
11
3,5 x 20 Screw
IQty
02
I
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Donco 1001 Assembly Instructions

Donco
Brand
Donco
Model
1001
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents