Extron XTP SR HD 4K User manual

Brand: Extron

Model: XTP SR HD 4K

Category: Video switches

Type: User manual

User Guide

XTP SR HD 4K

XTP Systems

XTP HDMI 4K Scaling Receiver

68-2717-01 Rev. D

Safety Instructions

Safety Instructions • English

WARNING: This symbol, , when used on the product, is intended to

alert the user of the presence of uninsulated dangerous voltage within the

product’s enclosure that may present a risk of electric shock.

ATTENTION: This symbol, , when used on the product, is intended

to alert the user of important operating and maintenance (servicing)

instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide, part number 68-290-01, on the Extron

website,

www.extron.com.

Sicherheitsanweisungen • Deutsch

WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf

aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes

gefährliche Spannungen herrschen, die nicht isoliert sind und die einen

elektrischen Schlag verursachen können.

VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in

der im Lieferumfang enthaltenen Dokumentation besonders wichtige

Hinweise zur Bedienung und Wartung (Instandhaltung) geben.

Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,

EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in

den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer

68-290-01) auf der Extron-Website, www.extron.com.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del

producto, lo que puede representar un riesgo de descarga eléctrica.

ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa

al usuario de la presencia de importantes instrucciones de uso y

mantenimiento recogidas en la documentación proporcionada con el

equipo.

Para obtener información sobre directrices de seguridad, cumplimiento

de normativas, compatibilidad electromagnética, accesibilidad y temas

relacionados, consulte la Guía de cumplimiento de normativas y seguridad

de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.

Instructions de sécurité • Français

AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le

produit, signale à l’utilisateur la présence à l’intérieur du boîtier du produit

d’une tension électrique dangereuse susceptible de provoquer un choc

électrique.

ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,

signale à l’utilisateur des instructions d’utilisation ou de maintenance

importantes qui se trouvent dans la documentation fournie avec le

matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la

réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets

connexes, lisez les informations de sécurité et de conformité Extron, réf.

68-290-01, sur le site Extron, www.extron.com.

Istruzioni di sicurezza • Italiano

AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad avvertire

l’utente della presenza di tensione non isolata pericolosa all’interno del

contenitore del prodotto che può costituire un rischio di scosse elettriche.

ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad avvertire

l’utente della presenza di importanti istruzioni di funzionamento e

manutenzione nella documentazione fornita con l’apparecchio.

Per informazioni su parametri di sicurezza, conformità alle normative,

compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento

alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo

68-290-01, sul sito web di Extron, www.extron.com.

Instrukcje bezpieczeństwa • Polska

OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu

poinformować użytkownika o obecności izolowanego i niebezpiecznego

napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie

porażenia prądem elektrycznym.

UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do

ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji

(obsługi) w literaturze, wyposażone w sprzęt.

Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji wzajemnej

zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne, zobacz Extron

bezpieczeństwa i regulacyjnego zgodności przewodnik, część numer 68-290-

01, na stronie internetowej Extron,

www.extron.com.

Инструкция по технике безопасности • Русский

ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан

на продукте, предупреждает пользователя о наличии

неизолированного опасного напряжения внутри корпуса

продукта, которое может привести к поражению электрическим

током.

ВНИМАНИЕ: Данный символ, , если указан на продукте,

предупреждает пользователя о наличии важных инструкций

по эксплуатации и обслуживанию в руководстве,

прилагаемом к данному оборудованию.

Для получения информации о правилах техники безопасности,

соблюдении нормативных требований, электромагнитной

совместимости (ЭМП/ЭДС), возможности доступа и других

вопросах см. руководство по безопасности и соблюдению

нормативных требований Extron на сайте Extron: ,

www.extron.com, номер по каталогу - 68-290-01.

安全说明 • 简体中文

警告：产品上的这个标志意在警告用户该产品机壳内有暴露的危险电压，

有触电危险。

注意：产品上的这个标志意在提示用户设备随附的用户手册中有

重要的操作和维护(维修）说明。

关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍

使用的特性等相关内容，敬请访问 Extron 网站 , www.extron.com，参见

Extron 安全规范指南，产品编号 68-290-01。

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks (

), registered service marks (

), and trademarks (

) are the property of RGBSystems, Inc. or

ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks

(

)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free, Global

Configurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink,

MediaPort, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch,

StudioStation, SystemI

NTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XPA, XTP,

XTPSystems, and ZipClip

Registered Service Mark

(SM)

: S3 Service Support Solutions

Trademarks

(

™

)

AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, AVEdge, CableCover, CDRS(ClassD

Ripple Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,

DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, Flex55, FOX, FOXBOX,

IP Intercom HelpDesk, MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller),

RoomAgent, Scope-Trigger, ShareLink, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, Triple-Action Switching, True4K, Vector™ 4K ,

WebShare, XTRA, and ZipCaddy

안전 지침 • 한국어

경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는

접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을

경고합니다.

주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와

있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.

안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에

대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및

규제 준수 안내서, 68-290-01 조항을 참조하십시오.

安全記事 • 繁體中文

警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著

可能會導致觸電之風險的未絕緣危險電壓。

注意若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有

重要的操作和維護（維修）説明。

有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細資

訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與法規

遵守手冊》，準則編號 68-290-01。

安全上のご注意

• 日本語

警告: この記号が製品上に表示されている場合は、筐体内に絶縁されて

いない高電圧が流れ、感電の危険があることを示しています。

注意:この記号が製品上に表示されている場合は、本機の取扱説明書に

記載されている重要な操作と保守(整備)の指示についてユーザーの注意

を喚起するものです。

安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に

ついては、エクストロンのウェブサイト www.extron.com より『 Extron Safety

and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ください。

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause interference. This interference must be corrected at the expense of the user.

ATTENTION: The Twisted Pair Extension technology works with unshielded twisted

pair (UTP) or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE

compliance, STP cables and STP Connectors are required.

For more information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the “Extron Safety and Regulatory

Compliance Guide” on the Extron website.

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

WARNING: Potential risk of severe injury or death.

AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.

ATTENTION:

• Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

TIP: A tip provides a suggestion to make working with the application easier.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C

[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]

EX!*X1&*X2)*X2#*X2!CE}

NOTE: For commands and examples of computer or device responses mentioned

in this guide, the character “0” is used for the number zero and “O” represents the

capital letter “o.”

Computer responses and directory paths that do not have variables are written in the font

shown here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32

C:\Program Files\Extron

Variables are written in slanted form as shown here:

ping xxx.xxx.xxx.xxx —t

SOH R Data STX Command ETB ETX

Selectable items, such as menu names, menu options, buttons, tabs, and field names are

written in the font shown here:

From the File menu, select New.

Click the OK button.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.

xiiiXTP SR HD 4K Scaling Receiver •

Contents

Introduction ...............................................1

Guide Overview ................................................... 1

Product Description ............................................. 1

System Compatibility ....................................... 2

Control Methods .............................................. 2

Features .............................................................. 2

XTP Interconnection Features .......................... 2

Video Features ................................................. 3

Audio Features ................................................ 3

Control Features .............................................. 3

General Features ............................................. 4

Installation .................................................5

Rear Panel Connectors ........................................ 5

XTP Interconnection ........................................ 6

Output Connections ........................................ 6

Control Connections ........................................ 7

Power Connection ........................................... 8

Connection Details .............................................. 8

HDMI Connection ............................................ 8

Twisted Pair Cable Termination and

Recommendations for XTP Communication ... 9

Twisted Pair Cable Termination for

Pass-Through Ethernet Communication ....... 10

RS-232 and IR Over XTP Communication ..... 11

Power Connection ......................................... 12

Operation .................................................15

Front Panel Features .......................................... 15

HDMI Audio Switch ........................................... 16

Audio Output Overview ...................................... 16

On-Screen Display Menu System ...................... 17

Menu Navigation Using Front Panel

Controls ........................................................ 17

Menu Overview .............................................. 17

Image Reset Submenu .................................. 18

Picture Controls Submenu ............................. 19

User Presets Submenu .................................. 20

Input Configuration Submenu ........................ 21

Output Configuration Submenu ..................... 21

Advanced Configuration Submenu ................ 24

Front Panel Lockout Mode (Executive Mode) ..... 25

Reset Modes ..................................................... 25

SIS Conﬁguration and Control .................26

Host Device Connection .................................... 26

SIS Overview ..................................................... 26

Host and Device Communication ................... 26

Device-Initiated Message ............................... 26

Error Responses ............................................ 27

Command and Response Table Overview...... 27

Symbol Definitions ......................................... 27

Command and Response Tables for SIS

Commands ...................................................... 28

Picture Control Commands............................ 28

Output Configuration Commands .................. 29

Audio Configuration Commands .................... 31

Preset Commands ......................................... 32

Advanced Configuration Commands ............. 32

Device Commands ........................................ 34

XTP SR HD 4K Scaling Receiver • xiv

Conﬁguration Software ............................35

Software Installation........................................... 35

Software Download Center Page ................... 35

Software Product Page .................................. 36

Software Connection ......................................... 37

Software Operation............................................ 37

Menu Bar ...................................................... 37

Device Settings .............................................. 41

Reference Information ............................. 50

Mounting ........................................................... 50

Tabletops ....................................................... 50

Furniture ........................................................ 50

Racks ............................................................ 50

Firmware Download ........................................... 51

XTP SR HD 4K Scaling Receiver • Introduction 1

Introduction

This section contains general information about this guide and the Extron XTP SR HD 4K

scaling receiver. Topics in this section include the following:

• Guide Overview

• Product Description

• Features

Guide Overview

This guide contains installation, operation, control, and reference information for the

XTP SR HD 4K scaling receiver primarily in point-to-point applications.

NOTE: See an XTP matrix switcher user guide at www.extron.com for matrix

applications.

In this guide, the terms “scaling receiver” and “XTP SR HD 4K” are used interchangeably to

refer to the XTP SR HD 4K scaling receiver.

Product Description

The Extron XTP SR HD 4K receives video, audio, bidirectional control, and Ethernet signals

over a single twisted pair cable. It is compliant with HDCP 2.2 standards and support video

signal resolutions up to 4K. It works with Extron XTP devices in matrix or point-to-point

applications for signal distribution and long-distance transmission between XTP devices.

It can be powered locally or remotely through an Extron XTP Power Injector or XTP matrix

switcher (see Power Connection on page 12).

The following diagram shows one way the XTP SR HD 4K can be integrated in an XTP

point-to-point application.

POWER

12V

HDMI

0.7A MAX

Rx GTx

RS-232 IR

RxTx

−+

LOOP THRU

RESET

AUDIO

OFF

AUDIO

XTP T HD 4K

LAN

SIG LINK

XTP OUT

INPUTS

OVER XTP

Ext

ron

P T HD 4K

P Transmitter

LAN

SIG LINK

XTP IN

POWER

12V

HDMI

1.4A MAX

Rx GTx

RS-232 IR

RxTx

−+−+

OVER XTP

AUDIO

OFF

S/PDIF

RESET

RS-232

Tx Rx G

REMOTERELAYS

OUTPUTS

AUDIO

HDMI

MODEL 80

FLAT PANEL

Extron

XTP SR HD 4K

XTP Receiver

4K Display

HDMI

Shielded

Twisted Pair Cable

up to 330' (100 m)

Figure 1. Typical XTP SR HD 4K Point-to-Point Application

XTP SR HD 4K Scaling Receiver • Introduction 2

System Compatibility

The XTP SR HD 4K is compatible with XTP systems, but the maximum video resolution may

be limited with different XTP devices. See the table below for maximum video resolutions

and refresh rates for various inputs and outputs.

Maximum Resolution and Refresh Rates for XTP Systems

Output

Non-4K 4K Fiber 4K Twisted

Pair

4K PLUS

Input

Analog 1920x1200

@ 60 Hz

1920x1200

@ 60 Hz

1920x1200

@ 60 Hz

1920x1200

@ 60 Hz

Non-4K Digital 2048x1080

@ 60 Hz

2048x1080

@ 60 Hz

2048x1080

@ 60 Hz

2048x1080

@ 60 Hz

4K Fiber 2048x1080

@ 60 Hz

4096x2160

@ 24 Hz

4096x2160

@ 24 Hz

4096x2160

@ 24 Hz

4K Twisted Pair 2048x1080

@ 60 Hz

4096x2160

@ 24 Hz

4096x2160

@ 30 Hz

4096x2160

@ 30 Hz

4K PLUS 2048x1080

@ 60 Hz

4096x2160

@ 24 Hz

4096x2160

@ 30 Hz

4096x2160

@ 60 Hz

Control Methods

To directly control the receiver, use one of the following methods:

• On-screen display (OSD) menu (see On-Screen Display Menu System on page 17)

• Simple Instruction Set (SIS) commands (see SIS Configuration and Control on

page 26)

• XTP System Configuration Software (see Configuration Software on page 35)

Certain features can also be controlled through an XTP matrix switcher (see the XTP matrix

switcher user guide at www.extron.com).

Features

XTP Interconnection Features

• Reliable cable infrastructure — Receives video, audio, bidirectional RS-232 and IR,

and Ethernet over a shielded twisted pair cable to provide high reliability and maximum

performance on an economical and easily installed cable infrastructure.

• Shielded twisted pair cable compatibility — Supports a maximum transmission

distance of 330 feet (100 meters) for all compatible resolutions when used with shielded

twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of

24 AWG or better is recommended for optimal performance.

• Bidirectional RS-232 and IR insertion for AV device control — Inserts bidirectional

RS-232 control and IR signals into the XTP output, allowing a remote device to be

controlled without the need for additional cabling.

• Ethernet extension — Reduces the amount of independent network drops required

within a system with centralized 10/100Base-T Ethernet communication via an Ethernet

pass-through port.

XTP SR HD 4K Scaling Receiver • Introduction 3

• Remote power capability — Allows for simplified integration of XTP twisted pair

transmitters and receivers. They can be powered by an XTP matrix switcher or another

XTP endpoint with an Extron power injector.

• RJ-45 signal and link status LED indicators for XTP ports — Provide a means

for validating signal flow and operation from transmitter to receiver, allowing quick

identification of connectivity issues.

Video Features

• Extron Vector 4K scaling technology — Ensures 4K imagery, with image upscaling

and downscaling, enhanced color accuracy, and picture detail.

• Scaler bypass mode — Allows scaling to be bypassed to support unprocessed

transmission of 3D, UHD 3840x2160 @ 60 Hz 4:2:0, 4096x2160 @ 60 Hz 4:2:0, and

other formats.

• Multiple video format compatibility — Scales HDMI, DVI, RGB, HD component

video, and standard definition video received from an XTP device.

• Computer and video resolutions up to 4K — Supports digital signal extension,

maintaining superior image quality at the highest resolutions.

• HDMI support — Includes data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D,

and HD lossless audio formats.

• HDCP compliance — Ensures display of content-protected media and interoperability

with other HDCP-compliant devices.

• Aspect ratio control — The aspect ratio of the video output can be controlled by

selecting a fill mode, which provides a full screen output, or a follow mode, which

preserves the original aspect ratio of the input signal.

Audio Features

• Multiple embedded audio formats — Provides reliable operation from HDMI sources,

compatible with a broad range of multi-channel audio signals.

• HDMI audio de-embedding with analog stereo and digital S/PDIF audio outputs

— Digital HDMI audio is made available as a balanced or unbalanced analog stereo

signal on captive screw connectors or a S/PDIF connector.

• Audio output volume adjustment and muting capabilities

• Selectable HDMI audio pass-through — Enables or disables audio signal

pass-through on the HDMI output from a rear panel toggle switch.

Control Features

• Front panel USB configuration port

• Contact closure device control — Enables control of room functions such as

projector lifts, screen operations, and other environmental controls.

• Extron XTP System Configuration Software compatibility — Allows for easy setup

and commissioning.

• On-screen menus — Intuitive on-screen menus allow for easy system setup using the

front panel controls.

• RS-232 control — Enables the use of serial commands for integration into a control

system. Extron products use the SIS command protocol, a set of basic ASCII

commands that allow for quick and easy programming.

XTP SR HD 4K Scaling Receiver • Introduction 4

General Features

• XTP compatibility — Provides a completely integrated solution for multiple digital and

analog formats through XTP integrated system products. XTP is a flexible, reliable signal

switching and distribution system.

• EDID Minder — Automatically manages EDID communication between connected

devices. It ensures that all sources power up properly and reliably outputs content for

display.

• Key Minder — Authenticates and maintains continuous HDCP encryption between

input and output devices to ensure quick and reliable switching in professional AV

environments, while enabling simultaneous distribution of a single source signal to one

or more displays.

• HDCP Visual Confirmation — Provides a green signal when encrypted content is

sent to a non-HDCP compliant display, providing immediate visual confirmation that

protected content cannot be viewed on the display.

• Aspect ratio control — Controls the aspect ratio of the video output by selecting a

FILL mode, which provides a full screen output, or a FOLLOW mode, which preserves

the original aspect ratio of the input signal.

• Image freeze control — Freezes a live image through RS-232 or USB control.

• Output Standby Mode — Automatically mutes video and sync output to the display

device when no active input signal is detected. This allows the projector or flat-panel

display to automatically enter into standby mode to save energy and enhance lamp or

panel life.

• Internal test patterns — Include five test patterns for calibration and setup.

• Front panel security lockout — Allows security lockout of front panel buttons.

• LED indicators for signal presence, HDCP, and power — Provides visual indication

of signal presence, HDCP, and power for real-time feedback and monitoring of key

performance parameters.

• LockIt HDMI cable lacing brackets — Secure HDMI cables to the HDMI connectors.

• 1" (2.5 cm) high, half rack width metal enclosure — Allows for discreet placement

and concealment.

• Highly reliable, energy-efficient external universal power supply included —

Provides worldwide power compatibility, with high demonstrated reliability and low

power consumption for reduced operating costs.

XTP SR HD 4K Scaling Receiver • Installation 5

Installation

This section contains installation procedures for the XTP SR HD 4K and wiring details.

Topics in this section include the following:

• Rear Panel Connectors

• Connection Details

Rear Panel Connectors

LAN

SIG LINK

XTP IN

POWER

12V

HDMI

1.4 A MAX

Rx GTx

RS-232 IR

RxTx

−+−+

OVER XTP

AUDIO

OFF

S/PDIF

RESET

RS-232

Tx Rx G

REMOTERELAYS

OUTPUTS

AUDIO

IABCDEFG

Interconnection

Connectors

Output Connectors Control and Power

Connectors

XTP input connector

(see the next page)

LAN connector

(see the next page)

RS-232 and IR Over

XTP connector

(see the next page)

HDMI output connector

and audio switch

(see the next page)

Analog audio output

connector

(see page 7)

S/PDIF audio output

connector

(see page 7)

Relay connectors

(see page 7)

Remote RS-232

connector

(see page 7)

Power connector

and LED

(see page 8)

Figure 2. XTP SR HD 4K Rear Panel Connectors

XTP SR HD 4K Scaling Receiver • Installation 6

XTP Interconnection

XTP input connector (see figure 2 on the previous page) — Connect an XTP twisted

pair cable transmitter or matrix switcher (see Twisted Pair Cable Termination and

Recommendations for XTP Communication on page 9) to the RJ-45 XTP input

connector. This cable carries the following signals:

• Digital video

• Digital audio

• Bidirectional RS-232 and IR commands

• Remote power

• Ethernet communication

• System communication

Signal LED indicator — Lights green when the XTP SR HD 4K receives an

active XTP input signal from a compatible transmitter or matrix switcher.

Link LED indicator — Lights yellow when a valid XTP link is established.

ATTENTION:

• Do not connect this connector to a computer data or telecommunications

network.

• Ne connectez pas cet connecteur à un réseau de télécommunications ou de

données informatiques.

• XTP remote power is intended for indoor use only. No part of the network that

uses XTP remote power should be routed outdoors (see Remote power on

page 14).

• XTP à distance est destiné à une utilisation en intérieur seulement. Aucune

partie du réseau qui utilise l’alimentation XTP à distance ne peut être routée en

extérieur (voir Remote power à la page 14).

LAN connector — Connect a control or controlled device to the receiver for

10/100Base-T Ethernet communication through this

pass-through connector. LEDs on the connector indicate link and activity status.

RS-232 Over XTP port — To pass bidirectional serial or other control signals between

XTP-compatible devices, connect a control device to the 5-pole captive screw

connector. The connector includes only the two poles labeled “RS-232” and shares the

ground pole with the IR poles.

IR Over XTP port — To transmit and receive IR signals (up to 56 kHz), connect a

control device to the 5-pole captive screw connector. This connector includes only the

two poles labeled “IR” and shares the ground pole with the RS-232 poles.

NOTE: RS-232 and IR data can be transmitted simultaneously (see RS-232 and IR

Over XTP Communication on page 11 for wiring details).

Output Connections

HDMI output connector and audio switch — Connect a digital video display to the

female HDMI connector. To mute or unmute the embedded audio, hold the HDMI audio

switch up or down (see HDMI Audio Switch on page 16). It supports HDMI or DVI

(with an appropriate adapter) signals.

NOTES:

• The maximum cable length is 15 feet (4.6 meters).

• Use an Extron LockIt Cable Lacing Bracket to secure the HDMI connector to

the device (see HDMI Connection on page 8).

SignalLink

XTP SR HD 4K Scaling Receiver • Installation 7

Analog audio output connector (see figure 2 on page 5) — Connect a balanced or

unbalanced, stereo or mono audio output device to the 3.5 mm, 5-pole captive screw

connector for analog audio output (see figure 3 for wiring details).

Do not tin the wires!

Balanced Audio Output

Tip

Ring

Tip

Ring

Slee

ves

Unbalanced Audio Output

Tip

No Ground Here

Tip

Sleeves

Figure 3. Audio Output Wiring

ATTENTION:

• For unbalanced audio, connect the sleeves to the contact ground. Do not

connect the sleeves to the negative (-) contacts.

• Pour l’audio asymétrique, connectez les manchons au contact au sol. Ne pas

connecter les manchons aux contacts négatifs (–).

NOTE: If the device is receiving 2-channel LPCM embedded audio on the HDMI

input signal, it is extracted and converted to a stereo analog signal.

S/PDIF audio output connector — Connect an audio device to the female orange

RCA connector for digital S/PDIF audio output (see Audio Output Overview on

page 16 for supported audio formats on the S/PDIF output). The type of audio

present on this output is dictated by the following:

• The audio format selected on the source material or device.

• The source device automatically outputting an audio format through EDID.

Control Connections

Relay connectors — Connect equipment that can be controlled via momentary or

latching contact, such as projector screens or lifts, to the normally open relays.

ATTENTION:

• Do not exceed 24 V at 1.0 A for each port.

• Ne pas dépasser 24volts à 1,0A pour chaque port.

Remote RS-232 connector — Connect a host device to the 3.5 mm, 3-pole captive

screw connector for serial control of the scaling receiver.

Do not tin the wires!

Controlling

Device

Ground (G)

Receive (Rx)

Transmit (Tx)

Ground (G)

Receive (Rx)

Transmit (Tx)

Bidirectional

Tx Rx G

RS-232

Figure 4. Remote RS-232 Wiring

XTP SR HD 4K Scaling Receiver • Installation 8

Power Connection

Power connector and LED (see figure 2 on page 5) — Connect the provided power

supply to the 2-pole captive screw connector (see Power Connection on page 12).

The Power LED lights to indicate the device is receiving power. It is the same as the

front panel Power LED (see figure 11,

on page 15).

NOTE: The XTP SR HD 4K can also be powered remotely (see Remote power on

page 14).

Connection Details

HDMI Connection

To secure the HDMI cable to the HDMI connector, use an Extron LockIt Cable Lacing

Bracket and a tie wrap.

Figure 5. Installing the LockIt Cable Lacing Bracket

1. Plug the HDMI cable into the panel connection (see figure 5,

2. Loosen the HDMI connection mounting screw from the panel (

) enough to allow the

LockIt to be placed over it. The screw does not have to be removed.

3. Place the LockIt on the screw and against the HDMI connector (

), and then tighten

the screw to secure the bracket.

4. Loosely place the included tie wrap around the HDMI connector and the LockIt (

5. While holding the connector securely against the cable lacing bracket, use pliers or

similar tools to tighten the tie wrap. Remove any excess length (

ATTENTION:

• Connect and pull the tie wraps until they are secure. Do not overtighten.

• Connectez et tirez les serre-câbles jusqu’à ce qu’ils soient sécurisés. Ne pas

trop serrer.

XTP SR HD 4K Scaling Receiver • Installation 9

Twisted Pair Cable Termination and Recommendations for XTP

Communication

Use the following pin configurations for twisted pair cables used for XTP communication.

12345678

RJ-45

Connector

Inser

t Twisted

Pair Wires

Pins:

Wire color

White-green

Green

White-orange

Blue

White-blue

Orange

White-brown

Brown

Wire color

T568A T568B

White-orange

Orange

White-green

Blue

White-blue

Green

White-brown

Brown

TIA/EIA-T568B

Pin Wire Color

1 White-orange

2 Orange

3 White-green

4 Blue

5 White-blue

6 Green

7 White-brown

8 Brown

Figure 6. Twisted Pair Cable Termination

Supported cables

The XTP SR HD 4K is compatible with shielded twisted pair (F/UTP, SF/UTP, and S/FTP)

and unshielded twisted pair (U/UTP) cables.

ATTENTION:

• Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201

cable to link the XTP products.

• N’utilisez pas le câble Skew-Free UTP version améliorée UTP23SF Extron ou le

câble STP201 pour relier les produits XTP.

• To ensure FCC Class A and CE compliance, STP cables and STP connectors are

required.

• Aﬁn de s’assurer de la compatibilité entre FCC Classe A et CE, les câbles STP et

les connecteurs STP sont nécessaires.

Cable recommendations

Extron recommends using the following practices for XTP communication to achieve full

transmission distances up to 330 feet (100 meters) and reduce transmission errors.

• Use the following Extron XTP DTP 24 SF/UTP cables and connectors for the best

performance:

• XTP DTP 24/1000 Non-Plenum 1000' (305 m) spool 22-236-03

• XTP DTP 24P/1000 Plenum 1000' (305 m) spool 22-235-03

• XTP DTP 24 Plug Package of 10 101-005-02

• If not using XTP DTP 24 cable, at a minimum, Extron recommends 24 AWG, solid

conductor, STP cable with a minimum bandwidth of 400 MHz.

• Terminate cables with shielded connectors to the TIA/EIA-T568B standard.

• Limit the use of more than two pass-through points, which may include patch points,

punch down connectors, couplers, and power injectors. If these pass-through points

are required, use shielded couplers and punch down connectors.

XTP SR HD 4K Scaling Receiver • Installation 10

NOTE: When using STP cable in bundles or conduits, consider the following:

• Do not exceed 40% ﬁll capacity in conduits.

• Do not comb the cable for the ﬁrst 20 m, where cables are straightened, aligned,

and secured in tight bundles.

• Loosely place cables and limit the use of tie wraps or hook-and-loop fasteners.

• Separate twisted pair cables from AC power cables.

Twisted Pair Cable Termination for Pass-Through Ethernet Communication

The twisted pair cable used for Ethernet communication depends on the network speed.

The LAN connectors support both 10Base-T (10 Mbps Ethernet) and 100Base-T

(100 Mbps Fast Ethernet), half-duplex and full-duplex Ethernet connections. Terminate

the RJ-45 connectors for Ethernet communcation with straight-through or crossover

termination standards.

NOTES:

• Do not use standard telephone cables. Telephone cables do not support Ethernet

or Fast Ethernet.

• To avoid transmission errors, do not stretch or bend the cables.

• Crossover cable — Wire one end of the twisted pair cable with the T568A standard

and the other with the T568B standard. Use this to connect to a computer.

• Straight-through (patch) cable — Wire both ends of the twisted pair cable with the

T568B standard. Use this to connect to a switch, hub, or router.

Straight-Through Cable

Pin End 1 Wire End 2 Wire

1 White-orange White-orange

2 Orange Orange

3 White-green White-green

4 Blue Blue

5 White-blue White-blue

6 Green Green

7 White-brown White-brown

8 Brown Brown

Crossover Cable

Pin End 1 Wire End 2 Wire

1 White-green White-orange

2 Green Orange

3 White-orange White-green

4 Blue Blue

5 White-blue White-blue

6 Orange Green

7 White-brown White-brown

8 Brown Brown

Figure 7. RJ-45 Pin Assignment

12345678

RJ-45 Connector

Insert T

wisted

Pair Wires

Pins:

Side View

XTP SR HD 4K Scaling Receiver • Installation 11

RS-232 and IR Over XTP Communication

The RS-232 and IR Over XTP connector passes serial signals (such as projector control

signals) and infrared data. To pass bidirectional serial command signals between

XTP-compatible devices, connect a control device to the three poles (Tx, Rx, and G) under

RS-232 of the 5-pole captive screw connector. To transmit and receive IR signals, connect

a control device to the three poles (G, Tx, and Rx) under IR. The ground (G) pole is shared.

NOTE: RS-232 and IR data can be transmitted or received simultaneously (see figure 8

for wiring considerations).

Tx/Rx

Pins

RxTx

RS-232 IR

RxTx

TxRx

RxTx

IR Device

RS-232 Device

Figure 8. Wiring the RS-232 and IR Over XTP Connector

ATTENTION:

• The length of the exposed wires in the stripping process is critical.

• La longueur des câbles exposés est primordiale lorsque l’on entreprend de les

dénuder.

• The ideal length is 3/16 inch (5 mm).

• La longueur idéale est de 5mm (3/16inches).

• If the exposed portion is longer, the wires may touch, causing a short circuit

between them.

• S’ils sont un peu plus longs, les câbles exposés pourraient se toucher et

provoquer un court circuit.

• If the exposed wires are shorter, they can be easily pulled out, even if tightly

fastened by the captive screws.

• S’ils sont un peu plus courts, ils pourraient sortir, même s’ils sont attachés par

les vis captives.

• Do not tin the wires. Tinned wire does not hold its shape and can become loose

over time.

• Ne pas étamer les câbles. Les câbles étamés ne sont pas aussi bien ﬁxés dans le

connecteur et pourraient être tirés.

XTP SR HD 4K Scaling Receiver • Installation 12

Power Connection

Apply power to the scaling receiver locally with the provided power supply (if necessary,

see figure 9 for wiring considerations) or remotely (through the XTP connector) with a power

injector or a matrix switcher.

Local power

SECTION A–A

Power Supply

Output Cord

2-Pole Captive Screw

Connector

Ridges

Smooth

Tie

Wrap

3/16”

(5 mm) Max.

Figure 9. Power Wiring

See the notifications on the next page for local power information and considerations.

Page is loading ...

Extron XTP SR HD 4K User manual

Brand: Extron

Model: XTP SR HD 4K

Category: Video switches

Type: User manual

Download PDF

report

in other languages

français: Extron XTP SR HD 4K Manuel utilisateur

Extron XTP SR HD 4K User manual

Extron XTP SR HD 4K User manual

in other languages

Related papers

Other documents