![](//vs1.manuzoid.com/store/data-gzf/1cbefb163475fbb4f32e4907a000a68e/2/001994118.htmlex.zip/bga.jpg)
Setting up barcode scanner
Triggers a scan via a programmable hardware button or button
in Rugged Control Center.
Select the desired barcode scanner operating mode.
Scanner automatically scans when a barcode is brought close to
A suffix is a series of keystrokes or characters to the end of the scan
A prefix is a series of keystrokes or characters added in front of the scan
Select the desired barcode scanner operating mode.
A suffix is a series of keystrokes or characters to the end of the scan
A prefix is a series of keystrokes or characters added in front of the scan
Triggers a scan via a programmable hardware button or button
in Rugged Control Center.
Scanner automatically scans when a barcode is brought close to
Select the desired barcode scanner operating mode.
Triggers a scan via a programmable hardware button or button
in Rugged Control Center.
Scanner automatically scans when a barcode is brought close to
A suffix is a series of keystrokes or characters to the end of the scan
A prefix is a series of keystrokes or characters added in front of the scan
Select the desired barcode scanner operating mode.
A suffix is a series of keystrokes or characters to the end of the scan
A prefix is a series of keystrokes or characters added in front of the scan
Triggers a scan via a programmable hardware button or button
in Rugged Control Center.
Scanner automatically scans when a barcode is brought close to
Select the desired barcode scanner operating mode.
A suffix is a series of keystrokes or characters to the end of the scan
A prefix is a series of keystrokes or characters added in front of the scan
Triggers a scan via a programmable hardware button or button
in Rugged Control Center.
Scanner automatically scans when a barcode is brought close to
Select the desired barcode scanner operating mode.
Triggers a scan via a programmable hardware button or button
in Rugged Control Center.
Scanner automatically scans when a barcode is brought close to
A suffix is a series of keystrokes or characters to the end of the scan
A prefix is a series of keystrokes or characters added in front of the scan