Aztech WMB260AC User manual

1

No part of this document may be reproduced, republished, or retransmitted in any

form or by any means whatsoever, whether electronically or mechanically,

including, but not limited to, by way of photocopying, recording, information

recording, or through retrieval systems without the express written permission. We

reserve the right to revise this document at any time without the obligation to notify

any person and/or entity. All other company or product names mentioned are used

for identification purposes only and may be trademarks of their respective owners.

LIMITATION OF LIABILITY AND DAMAGES

THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE

MANUFACTURER AND MANUFACTURER’S RESELLERS (COLLECTIVELY REFERRED TO AS

“THE SELLERS”) DISCLAIM ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY,

INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES

ARISING FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF

TRADE. IN NO EVENT WILL THE SELLERS BE LIABLE FOR DAMAGES OR LOSS, INCLUDING

BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL WILLFUL, PUNITIVE, INCIDENTAL,

EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF BUSINESS

PROFITS, OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD

PARTY ARISING OUT OF THE USE OR THE INABILITY TO USE THE PRODUCT OR THE

SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE RESULTING FROM DEFECTS IN THE

PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF DATA

OF ANY KIND, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY,

EVEN IF THE PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE

ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE PRODUCT OR ITS

SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF LIABLITY FOR DAMAGES, THE ABOVE LIMITATION MAY

NOT APPLY TO THE PARTIES. IN NO EVENT WILL THE SELLERS’ TOTAL CUMULATIVE

LIABILITY OF EACH AND EVERY KIND IN RELATION TO THE PRODUCT OR ITS SOFTWARE

EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT.

2

Contents

About the WMB260AC Whole-Home Wi-Fi Mesh System ....................................................... 3

Package Contents ........................................................................................................................ 5

Device Design ................................................................................................................................. 6

Getting Started as Router ................................................................................................................ 8

Plan your Extended Network ...................................................................................................... 9

Remove/Disable Conflicts ......................................................................................................... 10

Internet Sharing, Proxy, and Security Applications ............................................................ 10

Configuring TCP/IP Settings ....................................................................................................... 10

Configuring Internet Properties ................................................................................................ 10

Removing Temporary Internet Files......................................................................................... 11

Setup the Device ......................................................................................................................... 11

Accessing the Web User Interface ......................................................................................... 12

Web User Interface...................................................................................................................... 12

Status Icon and Reboot button ............................................................................................... 12

Internet Status ............................................................................................................................... 13

Reboot ............................................................................................................................................ 13

Navigation Panel ......................................................................................................................... 13

A. General ............................................................................................................................... 13

B. Advanced.......................................................................................................................... 16

C. Management .................................................................................................................... 25

Getting Started as Mesh Controller ............................................................................................ 29

Plan your Extended Network .................................................................................................... 30

AON Mesh Web User Interface ................................................................................................ 32

Setting up your WMB260AC Whole-Home Wi-Fi Mesh System as Mesh Controller ... 32

Adding More WMB260AC Whole-Home Wi-Fi Mesh System Mesh Nodes .................. 34

Getting Started as Mesh Node .................................................................................................... 35

Plan your Extended Network .................................................................................................... 36

AON Mesh Web User Interface ................................................................................................ 37

Setting up your WMB260AC Whole-Home Wi-Fi Mesh System as Mesh Node ........... 38

Adding More WMB260AC Whole-Home Wi-Fi Mesh System Mesh Nodes .................. 39

Setting WMB260AC as Access Point (AP) ............................................................................. 40

Safety Warning ................................................................................................................................. 41

3

About the WMB260AC Whole-Home Wi-Fi Mesh

System

Excellent wireless performance had always been the major requirement of homes

when it comes to having an extended wireless network which functions perfectly for

varying needs. And with the introduction of Mesh, seamless roaming from one point

to another has become one of the wanted features in extended networks and to be

able to tackle the Wi-Fi dead spots in our homes (especially with larger homes) with

efficient wireless performance and quality. With careful consideration to meet these

requirements, Aztech developed the WMB260AC Whole-Home Wi-Fi Mesh System, a

Dual Band Wireless-AC 1200Mbps Wireless Mesh Controller or Node, a device that

equips your home further with extended wireless flexibility and wireless performance.

WMB260AC Whole-Home Wi-Fi Mesh System is designed as a mesh-ready wireless

device capable to function as mesh controller or node to extend the wireless

network in your home.

• Amped up Speed for the Wireless Experience

WMB260AC Whole-Home Wi-Fi Mesh System has a Dual Band feature which

enables users to connect their dual band wireless devices in either (1) the

2.4GHz band with wireless speed of up to 300Mbps, and (2) the faster 5.0GHz

wireless frequency band with excellent wireless speed of up to 900Mbps -

speed perfect for High-Definition A/V streaming, endless hours of lag-free

online gaming, and other bandwidth hungry applications.

• Impressive Hardware Design

Aside from its compact look, the Aztech WMB260AC Whole-Home Wi-Fi Mesh

System is geared up with one (1) Gigabit Ethernet port designed to maximize

wired accessibility and also to ensure full compatibility even with wired

network requirements – allowing this device to be a better option when it

comes to extending networks.

• Easy Installation and Setup

Involving zero complexity in its setup, the WMB260AC Whole-Home Wi-Fi Mesh

System implements an intuitive design making the device easy to setup,

explore, and even use. Easily manage various features through an OS

Independent Web User Interface that users can easily access after setting up

the device.

• Fast and Reliable Wireless Performance

Aztech WMB260AC Whole-Home Wi-Fi Mesh System is exquisitely designed to

maximize the 802.11ac wireless standard by providing an ideal performance

to all 5.0GHz wirelessly connected devices SIMULTANEOUSLY.

4

• Connect Easily using Wi-Fi Protected Setup (WPS)

WMB260AC Whole-Home Wi-Fi Mesh System is also designed with a Wi-Fi

Protected Setup (WPS) button which enables an easier means of connecting

WPS-enabled wireless devices with just a few button presses.

• AON Mesh-Ready Controller or Node

WMB260AC Whole-Home Wi-Fi Mesh System is an AON Mesh-Ready Controller

that is designed to be compatible with any mesh ready nodes to provide the

efficient roaming and wireless experience. This device is also AON Mesh-

Ready Node that is designed to be compatible with Aztech AIR routers or any

mesh ready router.

• AON Mesh for Seamless Roaming

With AIR router, WMB260AC Whole-Home Wi-Fi Mesh System provides

seamless roaming and using only one password and a single Wi-Fi network

name. It delivers improved coverage and to provide a spectral blanket

spread eliminating the usual “hard-to-get” areas such as blind spots.

5

Package Contents

Package contents are listed below. For any missing items, please contact your

dealer immediately. Product contents vary for different models.

• WMB260AC Whole-Home Wi-Fi Mesh System

• Ethernet cable (Yellow)

• DC Power Adapter

• Easy Start Guide

• Warranty Policy

NOTE: You may also download the Quick Installation Guide and the User Manual by

visiting this link: http://www.aztech.com

6

Device Design

Front Panel

LED

Status

Description

1. Power

Off

Blue(Solid)

Red (Solid)

No power is supplied to the

device

Device Boot up successfully

Error on the device boot up

2. Wireless

Off

Blue (Solid)

Red (Solid)

Wireless is Off

All Wireless interface is up

Wireless Error or wireless is

disabled

3. AON

Off

Blue (Solid)

Red (Solid)

Red (Blinking)

Not in Mesh

Mesh Mode with good

connection between AIR

router and WMB260AC

Mesh Mode with poor

connection between AIR

router and WMB260AC

Mesh Link down

4. WPS

Blue(Fast Blinking)

Blue (Slow Blinking)

Indicates Mesh Pairing

process.

Indicates WPS pairing

between WMB260AC and

client’s device

7

Back Panel

Physical Interface

Description

5. Reset Button

To reset the modem to the factory default

configuration

6. Gigabit Ethernet Port

For Ethernet cable and connecting computers

and other Ethernet devices

7. Broadband Port

For Broadband connection

8. On/Off Switch

Switch to on and off the router

9. Power Input

Adapter input

8

Getting Started as Router

Setting up the device is fast and easy. The diagram below provides an outline of the

steps needed in order to complete the installation. Brief descriptions appear beside

each step. Detailed instructions are provided in the subsequent pages.

You may see the suggested network setup.

You may need to remove or disable some

settings in your computer before

proceeding with the installation

Connect the telephone cables, Ethernet

cables and power adapters

Complete the WAN Setup to get internet

connection.

9

Plan your Extended Network

Before moving ahead to setup your network, it is a good idea to draw out a network

diagram to help identify your network devices and plan out how to connect these

devices.

Each port in the device can be used only as defined below:

• Ethernet 1 – Broadband Port

• Ethernet 2 – (Gigabit Ethernet Port) Laptop

To create a network diagram:

• For wireless devices, identify the wireless devices you want to include in the

network.

• For wired devices, identify which Ethernet port you want to use for each

device.

10

Remove/Disable Conflicts

To ensure that the router installation moves on smoothly, you need to remove or

disable conflicts that may interfere with the installation. Probable conflicts may

include:

• Internet sharing applications

• Proxy software

• Security software

• TCP/IP settings

• Internet properties

• Temporary Internet files

Internet Sharing, Proxy, and Security Applications

Internet sharing, proxy software, and firewall applications may interfere with the

router installation. These should be removed or disabled before starting the

installation. If you have any of the following or similar applications installed on your

computer, remove or disable them according to the manufacturer’s instructions. If

you have any of the following or similar applications installed on your computer,

remove or disable them according to the manufacturer’s instructions.

Internet Sharing

Applications

Proxy Software Security Software

Microsoft Internet Sharing

Win Gate

Symantec

WinProxy

Zone Alarm

Configuring TCP/IP Settings

Check if your computer uses the default TCP/IP settings. Follow the steps below to

check the TCP/IP properties:

1. Select Start > Run. The Run dialog box would appear.

2. Enter control ncpa.cpl on the input box, and then click the OK button. This

would open the Network Connections window in your computer.

3. Right-click LAN and then select Properties. The Local Area Connection

Properties dialog box would appear.

4. Select Internet Protocol (TCP/IP) and then click Properties. The Internet

Protocol (TCP/IP) dialog box would appear.

5. Select Obtain an IP address automatically.

6. Click the OK button to close the Internet Protocol (TCP/IP) dialog box.

7. Click the OK button to close the Local Area Connection Properties dialog

box.

Configuring Internet Properties

Follow the steps below to set the Internet Properties:

1. Select Start > Run. This opens the Run dialog box.

11

2. Enter control inetcpl.cpl and then click OK to open the Internet Properties

window.

3. Click on the Connections tab.

4. On the Dial-up and Virtual Private Network settings pane, select Never dial a

connection.

5. Click OK to close Internet Properties.

Removing Temporary Internet Files

Temporary Internet files are files from Web sites that are stored in your computer.

Delete these files to clean the cache and remove footprints left by the Web pages

you visited. Follow the steps below to remove temporary Internet files:

1. Select Start > Run to open the Run dialog box.

2. Enter control and then click the OK button to open the Control Panel.

3. Double-click Internet Options.

4. On the Internet Options window, in the Temporary Internet Files pane, click

Delete Cookies.

5. Click Delete Files.

6. Click OK to close Internet Properties.

Setup the Device

When installing the router, find an area near the ONT and near an electrical outlet

for the router.

a. Power ON your WMB260AC Whole-Home Wi-Fi Mesh System by

connecting and plugging its power adapter to a power outlet.

b. Connect your ONT*/Cable Modem to the WMB260AC Whole-Home Wi-Fi

Mesh System’s Broadband port using an Ethernet cable.

c. Connect PC/Laptop to the router through local Ethernet or wireless.

12

The Web User Interface

The Web User interface allows you to configure your WMB260AC Whole-Home Wi-Fi

Mesh System’s features.

Accessing the Web User Interface

To access your WMB260AC hole-Home Wi-Fi Mesh System Web User Interface:

1. Launch any web browser (e.g. Internet Explorer, Google Chrome).

2. Type-in 10.0.10.254 on the address bar and then press Enter. This is only for

stand-alone WMB260AC Whole-Home Wi-Fi Mesh System.

3. If you have connected the WMB260AC Whole-Home Wi-Fi Mesh System to

a main router as Mesh Node, access the main router’s Web User Interface

and check the IP of the WMB260AC Whole-Home Wi-Fi Mesh System. After

finding out the IP of WMB260AC Whole-Home Wi-Fi Mesh System, access

the Web User Interface of WMB260AC using that IP. WMB260AC Whole-

Home Wi-Fi Mesh System will be listed as WMB260 in your router connected

device list.

E.g. if IP of the main router is 192.168.1.254, the possible IP of WMB260AC

Whole-Home Wi-Fi Mesh System can be 192.168.1.x

Web User Interface

The Web User Interface is subdivided into three (3) different categories:

• General

• Advanced

• Management

Status Icon and Reboot button

The WMB260AC Whole-Home Wi-Fi Mesh System has a top panel which displays a

representation of the Internet Status. A Reboot feature is also available in the top

panel for easier means of soft device reboot.

• Internet Status

• Reboot

13

Internet Status

The internet status shows the different internet status. There 2 different statuses: Up or

Down.

Internet Status Colour

Description

Down – No internet

Up

Reboot

A Reboot button is provided in the top panel for easy access of the reboot

function if there is a need to reboot the WMB260AC Whole-Home Wi-Fi Mesh System

using the GUI without having to access the Advanced Page.

Navigation Panel

Allows you to access the General, Advanced and Management configurations of

WMB260AC Whole-Home Wi-Fi Mesh System. This includes the basic and advanced

wireless network properties, view the connected clients and the administration

settings.

• General

• Advanced

• Management

A. General

The General is the default page of the Web User Interface. It allows you to view the

operation mode, IPv4 address, internet status, SSID and System Uptime. The General

Tab consists of two sub-tabs:

• Connected Devices

• Wireless

14

Connected Devices

The Connected Devices Page shows the connected devices to the WMB260AC

Whole-Home Wi-Fi Mesh System. It also shows the interface of the device.

WAN Setup

You can select Protocol as DHCP or PPPoE. If DHCP is selected, you have option to

set VLAN number. If the VLAN number is blank, VLAN not enabled.

If, PPPoE is selected, you will prompted to key-in PPPoE username and password as

well.

15

Wireless (Basic)

The Wireless Page allows you to set the basic wireless configurations of WMB260AC

Whole-Home Wi-Fi Mesh System. In this page, you can change the SSID, Password

and set the Band Steering to Enabled or Disabled. The wireless settings of

WMB260AC Whole-Home Wi-Fi Mesh System will sync with the AIR router settings after

a successful mesh pairing.

To configure the Wireless Settings in the Wireless Page (Basic):

1. You may designate a new SSID or a Wireless Network Name for your wireless

network or use the same SSID as your main router.

2. Set the Band Steering:

a. Set to Enabled if you wish to see a single SSID. When Enabled:

o Your 2.4GHz and 5GHz SSID name and Network Password must be

the same.

o Your device will either connect to the 2.4GHz or 5GHz bands

depending on the distance your device from the WMB260AC.

o Connection to 5GHz is only for devices that support both 2.4GHz

and 5GHz.

b. Set to Disabled if you wish to see two separate SSID for 2.4GHz and 5GHz.

o SSID for 2.4GHz and 5GHz must be different

3. Click Apply to save the settings.

16

B. Advanced

Advanced Tab allows you to configure the Advanced Wireless settings and Wireless

MAC Filtering. There are two sub tabs for Advanced:

• LAN Settings

• Wi-Fi MAC Filtering

• Port Forwarding

• Port Triggering

• Parental Control

• MAC Filtering

• URL Filtering

LAN Settings

In this LAN Settings page, you can set IP Address, subnet mask, and default gateway

of the Router.

You can also set if DHCP Server is active, start and end IP addresses.

17

Wi-Fi MAC Filtering

The Wi-Fi MAC Filtering page will provide additional protection to your wireless

network. It allows or denies Wireless Devices from accessing the WMB260AC Whole-

Home Wi-Fi Mesh System with the use of the MAC address which is unique for every

network device.

To add a MAC Filter in your 2.4GHz network,

1. Enable MAC Filtering by selecting Yes

2. Set the Access Rule to Deny to deny wireless to the listed MAC Address in the

MAC Filtering Table.

3. Add the client’s MAC Address by typing out the MAC Address of the client or

click on Add currently associated MAC stations.

18

By clicking the Add currently associated MAC stations, a device that are

connected to 2.4GHz will be added. If there is more than one 2.4GHz device

connected, one of those devices will be added.

To add a MAC Filter in your 2.4GHz network,

1. Enable MAC Filtering by selecting Yes

2. Set the Access Rule to Deny to deny wireless to the listed MAC Address in the

MAC Filtering Table.

3. Add the client’s MAC Address by typing out the MAC Address of the client or

click on Add currently associated MAC stations.

By clicking the Add currently associated MAC stations, a device that are

connected to 2.4GHz will be added. If there is more than one 2.4GHz device

connected, one of those devices will be added.

19

To add a MAC Filter in your 5.0GHz network,

1. Enable MAC Filtering by selecting Yes

2. Set the Access Rule to Deny to deny wireless to the listed MAC Address in the

MAC Filtering Table.

3. Add the client’s MAC Address by typing out the MAC Address of the client or

click on Add currently associated MAC stations.

By clicking the Add currently associated MAC stations, a device that are

connected to 5.0GHz will be added. If there is more than one 2.4GHz device

connected, one of those devices will be added.

NOTE:

1. When MAC Filtering is set to Enabled with Access Rule set to Yes, this means

that clients listed in the MAC Filtering Table are the only devices allowed to

wireless access.

2. When MAC Filtering is set to Enabled with Access Rule set to Yes, this means

that clients listed in the MAC Filtering Table is empty, this means NO devices

have access to wireless

Page is loading ...

Aztech WMB260AC User manual

Aztech WMB260AC User manual

Related papers

Other documents