Eneo HDD-2110M1080 Installation And Operating Instructions Manual

Eneo
Brand
Eneo
Model
HDD-2110M1080
Category
Security cameras
Type
Installation And Operating Instructions Manual
1
Installations- und Betriebsanleitung
1/3” Tag/Nacht HD-SDI Domekamera, Fix
HDD-2110M1080
Installation and Operating Instructions
1/3” Day & Night HD-SDI Dome Camera
HDD-2110M1080
2
Inhalt
1. Sicherheitshinweise / Wartung.............................................................................................................................4
2. Allgemeine Beschreibung ....................................................................................................................................
5
3. Lieferumfang .......................................................................................................................................................5
4. Bezeichnungen ....................................................................................................................................................6
5. Installation ..........................................................................................................................................................7
6. Anschluss ............................................................................................................................................................8
7. Menubedienung ..................................................................................................................................................9
7.1 Hautmenü..................................................................................................................................................9
7.2 Belichtungseinstellung (Exposure)............................................................................................................10
7.3 Weißabgleich (White Balance) ..................................................................................................................11
7.4 Bild (Image) .............................................................................................................................................12
7.5 Intelligence ..............................................................................................................................................13
7.6 Spezialfunktionen (Special Function) ........................................................................................................14
7.7 Anzeige (Display) .....................................................................................................................................15
8. Fehlersuche.......................................................................................................................................................16
9. Technische Daten ..............................................................................................................................................
17
10. Maßzeichnungen ...............................................................................................................................................
34
Betriebsanleitung
Installation and Operating Instructions
Mode d’emploi
Instrukcja instalacji i obs
ługi
www.videor.com
www.eneo-security.com
⇒
3
Contents
1. Safety Instructions / Maintenance ......................................................................................................................19
2. General Description ...........................................................................................................................................
20
3. Supplied Items ..................................................................................................................................................
20
4. Part Names .......................................................................................................................................................
21
5. Installation ........................................................................................................................................................22
6. Connection ........................................................................................................................................................23
7. Menu Operation .................................................................................................................................................
24
7.1 Main Menu ..............................................................................................................................................24
7.2 Exposure .................................................................................................................................................25
7.3 White Balance .........................................................................................................................................26
7.4 Image ......................................................................................................................................................27
7.5 Intelligence ..............................................................................................................................................28
7.6 Special Function ......................................................................................................................................29
7.7 Display ....................................................................................................................................................30
8. Troubleshooting .................................................................................................................................................31
9. Technical Specifications ....................................................................................................................................
32
10. Dimensional Drawings .......................................................................................................................................
34
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
19
1. Safety Instructions / Maintenance
• Read these safety instructions and the operation manual first before you install and commission the camera.
• Keep the manual in a safe place for later reference.
• Protect your camera from contamination with water and humidity to prevent it from permanent damage.
Never switch the camera on when it gets wet. Have it checked at an authorized service center in this case.
• Never operate the camera outside of the specifications as this may prevent the camera functioning.
• Do not operate the cameras beyond their specified temperature, humidity or power ratings.
• Operate the camera only at a temperature range of -10°C to +50°C and at a humidity of max. 90%.
• To disconnect the power cord of the unit, pull it out by the plug. Never pull the cord itself.
• Pay attention when laying the connection cable and observe that the cable is not subject to heavy loads, kinks,
or damage and no moisture can get in.
• Do not attempt to disassemble the camera board from the dome.
• The warranty becomes void if repairs are undertaken by unauthorized persons.
Do not open the camera housing.
• Never point the camera towards the sun with the aperture open. This can destroy the sensor.
• Installation, maintenance and repair have to be carried out only by authorized service centers.
Before opening the cover disconnect the unit from mains input.
• Contact your local dealer in case of malfunction.
• Only use original parts and original accessories from Videor E. Hartig GmbH.
• Do not use strong or abrasive detergents when cleaning the dome.
Use a dry cloth to clean the dome surface.
In case the dirt is hard to remove, use a mild detergent and wipe gently.
• All openings provided in the housing for assembly purposes must be closed and/or sealed.
• The installer is responsible for ensuring that the degree of protection as per the technical specifications
is upheld, e.g. by using all enclosed gasket seals and O-rings, by waterproofing the cable exits with
silicon or through laying the cable in such a way that the cable does not act as a „gutter”.
• During assembly, care must be taken to ensure that existing seals are correctly inserted and are not
displaced as a result of assembly.
You must not continue to use damaged seals.
NOTE: This is a class A digital device. This digital device can cause harmful interference in a residential
area; in this case the user may be required to take appropriate corrective action at his/her own
expense.
20
2. General Description
• 1/3” 2.0 megapixels Progressive Scan CMOS sensor
• Resolution max. 1920 x 1080 (HD 1080p)
• 1.5G HD-SDI video transmission via coax cable
• WDR (Wide Dynamic Range)
• Integral motion detection
• Integral object detection
• Digital zoom (2x - 32x)
• Privacy Zones
• Flat and compact design
• Wall or ceiling mount
• Vandal-resistant, IP66
3. Supplied Items
Mounting kit
Installation and Operating Instructions
Camera
Screws 8#25
Lens angle tool
21
4. Part Names
Security bolt
M4x12
Top case
CH MS M3x5 tap
Bottom case
PCB cover
CH MS M3x5 tap
Cable nut
Case rubber
Main PCB
Dome assembly
Dome bracket
Joystick
CH MS M3x5 tap
Top case
Dome rubber
Dome 45
MS M3x5 tap
Fixing dome bracket
22
5. Installation
1. Attach the FLAT DOME on the ceiling, using the screws provided, after giving due consideration to the camera
angle required for the surveillance function.
2. After attaching use the LENS ANGLE TOOL to direct the lens to the desired location.
3. The LENS adjustable viewing angle should be 22.5 degrees (see the picture above).
4. Connect the VIDEO OUT CABLE and check the video image.
Change the SETTINGS accordingly using the OSD menu or a keyboard controller.
5. After the LENS SETTING is completed, install the TOP COVER.
Lens angle tool
Controller
Video out cable
23
6. Connection
#1 HD-SDI (blue)
#2 CVBS (yellow)
#3 Power (red)
485(+) gray
485(–) white
D/N IN blue
MD OUT yellow
TRIGGER purple
GND green
No. Function Colour Specification
1
HD SDI cable blue HD SDI
2
Analog video cable
yellow CVBS
3
Power red 12VDC
RS-485
HD video cable
Video cable
Power
24
7. Menu Operation
7.1 Main Menu
Functions can be set-up using the Menu Key or Pelco protocol.
The menu consists of the „Main Menu” and „Sub Menus”.
The main Menu displays 6 camera functions that can be selected.
Sub-Menus are displayed by pressing each main menu selection.
25
7.2 Exposure
• BRIGHTNESS: Adjust brightness level
0 (dark) ~ 20 (bright) steps
• LENS: MANUAL
• SHUT SPEED: Can be set in AUTO or MANUAL
AUTO / 1/30 (25), 1/60 (50), 1/120 (100), 1/240, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/16000, 1/30000,
1/60000 sec
• DSS: Select maximum DSS (Digital Slow Shutter)
OFF / x2, x3, x4
• AGC: Select Auto Gain Control
OFF/ON
• WDR/ BLC: Select WDR (Wide Dynamic Range) or BLC (Back Light Compensation)
WDR
WEIGHT: Adjust WDR level - 0 ~ 3
BLC
AREA: Control BLC area according to light condition
POS-X: Adjust the window X-Axis position
POS-Y: Adjust the window Y-Axis position
SIZ-X: Adjust the window X-Axis size
SIZ-Y: Adjust the window Y-Axis size
NOTE: When WDR is ON, ACE and DEFOG functions do not turn on.
• DAY& NIGHT: Select Day& Night
AUTO / DAY / NIGHT / EXT
Delay: 0 ~ 255 sec
BURST: OFF / ON
THRS: LOW / MIDDLE / HIGH
Select Day&Night change level. Higher level make the night mode changed in lower illumination.
GAP: LOW / MIDDLE / HIGH
Select the switchover delay time from Day to Night, and from Night to Day.
26
7.3 White Balance
• AWB: Select WHITE BALANCE mode
AUTO / PRESET / MANUAL / INDOOR / OUTDOOR
AUTO: Automatically adjusts color according to the lighting.
PRESET: It is a fixed white balance mode that may be automatically readjusted only by pressing PRESET
MANUAL: You can change WB as changing „RED GAIN” and „BLUE GAIN” in manual mode.
– RED GAIN: Adjust R gain value 0 ~ 20
– BLUE GAIN: Adjust B gain value 0 ~ 20
INDOOR: Set colour temperature to be Indoor light (3700K)
OUTDOOR: Set colour temperature to be Outdoor light (5100K)
• CHROMA: Adjust CHROMA gain value
0 ~ 20 steps
27
7.4 Image
• SHARPNESS: Adjust sharpness level
0 ~ 10 steps
• MIRROR: Select a flip mode
OFF / H / V / H&V
H: Flips the picture horizontally on the screen
V: Flips the picture vertically on the screen
H&V: Flips the picture horizontally & vertically on the screen
• Freeze: Select real or still mode
OFF / ON
• E.ZOOM: Select maximum digital zoom magnification
x1 ~ x12, x14, x15, x18, x21, x25, x32
• HLC: Select High Light Compensation
If an extremely bright light is projected onto the camera, masking is used on this portion to prevent partial
saturation of the image.
OFF / ON
ON LEVEL: 0 ~ 20 steps
COLOR: Black, White, Yellow, Cyan, Green, Magenta, Red, Blue
• ACE: Select Digital WDR (Wide Dynamic Range)
OFF / ON
NOTE: When ACE is ON, WDR/BLC and DEFOG functions do not turn on.
• DNR: Select Digital Noise Reduction
AUTO / OFF / LOW / MIDDLE / HIGH
• D.COMPRESS: Video image data compression function. Please use this function only with an IP camera model.
OFF / ON
28
7.5 Intelligence
• PRIVACY: Hide an on screen screen area
OFF / ON
MASK#: Select mask area number (0 ~ 31)
MODE: Set-up masking areas (OFF / ON)
X-POS: Adjust the mask X-Axis position
Y-POS: Adjust the mask Y-Axis position
X-SIZ: Adjust the mask X-Axis size
Y-SIZ: Adjust the mask Y-Axis size
COLOR: Cyan, Green, Magenta, Red, Blue, Black, White, Yellow
TRANS: Select mask transparency level (0 ~ 4)
• MOTION: If there is subject movement on the screen, this is detected as motion by the camera.
OFF / ON
SENSITIVITY: Adjust sensitivity of MD (0 ~ 20 steps)
More sensitive to lower settings for sensitivity
AREA: Designate motion detection area (WHOLE / EACH)
– AREA#: Setting 3 areas (0~2) for motion detection
– MODE: Limit and define areas of motion detection
– X-POS: Adjust the mask X-Axis position
– Y-POS: Adjust the mask Y-Axis position
– X-SIZ: Adjust the mask X-Axis size
– Y-SIZ: Adjust the mask Y-Axis size
– TRANS: Adjust colour tone of out of selected areas
INTERVAL: Select the alarm interval time (0 ~ 255 sec)
DWELL: Select the duration time for changing MD mode (0 ~ 255 sec)
RETURN
29
7.6 Special Function
• SHADING DET: Sets the shading calibration that the Lens will perform.
Only occurs if the entire screen is viewed in white light (OFF / ON).
• SHADING: Select Lens shading compensation (OFF / ON)
• DEFECT DET: Compensates for bad pixels that may appear. Occurs when the whole screen is fully black, or
if there is bad pixelation, and it changes the THRS values until the screen is fixed (OFF / ON).
• DEFOG: Carry out defog function
OFF / ON
LEVEL: Adjust amount of fog viewed on the display screen
0 ~ 10
NOTE: When DEFOG is ON, ACE and WDR/BLC functions do not turn on.
• SYSTEM: Select NTSC or PAL (NTSC / PAL)
• HD FORMAT: Select Digital Output 1080P or 720P (1080P / 720P)
• PG: Select Colour pattern generator (OFF / ON).
• CVBS: Select Composite signal (OFF / ON)
• COMM: Set up the camera ID, baud rate, protocol
ID: Select the Camera ID
1 ~ 255
BAUD RATE: Select serial communication speed
2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200bps
PROTOCOL: Select operating protocol
PELCO-D / PELCO-P / UPDATE
• DEFAULT: All the settings will be restored to their factory defaults.
30
7.7 Display
• DISP SEL: Select display item
ID: OFF / ON
TITLE: OFF / ON
EZOOM : OFF / ON
• SET TITLE: Select camera title menu (Text edit)
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z a b c d e f g h i j k l m n
o p q r s t u v w x y z , . ( ) { } [ ]
0 1 2 3 4 5 6 7 8 9 * + - / = ! ?
" '
S P B S C L R P O S
RETURN
31
8. Troubleshooting
If you have trouble operating your camera, refer to the following. If the guidelines do not enable you to solve the
problem, contact an authorized technician.
Problem Possible Solution
Nothing appears on the screen.
• Check the power connection and power supply is functioning.
• Check the video signal line connection.
• Check and make sure that the lens mode switch is set to DC (VIDEO)
when using a VIDEO (DC) lens.
The video image is not clear.
• Clean the lens with a soft lint-free clean cloth.
• Adjust that the screen is not exposed directly to a bright light.
• Move the camera if necessary.
• Re-adjust the back-focus of the camera.
The screen is dark.
• Adjust the contrast feature of the monitor.
• If you have an intermediante device, set the 75Ohm/Hi-z properly, and
check the termination.
• Check if an auto iris lens is being used and adjust the brightness level.
The MOTION DETECTION function
is not working.
• Check if „MOTION DETECTION” mode is turned on in OSD menu.
• Check if the MD Sensitivity is too low.
• Check the setting of the MD AREA.
The WDR function is not working.
• Check if the WDR Level is too low.
• Check if the AE Mode is set to MANUAL.
The WDR doesn’t work in MANUAL Exposure mode.
Colours are not quite right.
• Check if the camera is facing directly into sunlight or fluorescent light.
• Check if an auto iris lens is being used.
• Check, if applicable, the connection of the lens connector cable.
The Day&Night function
doesn ’t work.
• Check if the mode is set to something other than Auto mode.
• Check the Day <–> Night LEVEL.
32
9. Technical Specifications
Type HDD-2110M1080
Art. No. 200840
Series
eneo HD-SDI
System
day&night
Sensor size
1/3”
Imager
CMOS, Panasonic Progressive Scan CMOS imager
Active picture elements
1944(H) x 1092(V)
Resolution
1920x1080 (16:9), 1280x720 (16:9)
Frame rate
1080 at 25/30p, 720 at 50/60p
Synchronization
internal
Signal-to-noise ratio
-50dB
Sensitivity (at 50% video signal)
1Lux, 0.5Lux (b&w)
Automatic gain control (AGC)
ON/OFF switchable
Exposure modes
automatic, manual
Automatic electronic shutter (ESC)
1/25 ~ 1/60000sec.
Low speed shutter
yes, 2x ~ 4x
Digital Noise Reduction (DNR)
yes, 2D & 3D
Backlight compensation
BLC, ON/OFF switchable
Wide Dynamic Range (WDR)
yes, ON/OFF switchable
White balance
automatic, manual, indoor, outdoor, Preset
Blemish compensation
pixel compensation ON/OFF selectable
IR cut filter
standard
Day/Night switching
auto, day, night, by external contact closure
Privacy zones masking
32 zones masking
Menu language
English
OSD function control
AGC, day&night, white pixel correction, WDR/BLC, digital zoom, white
balance, DNR, privacy zones, motion detection, shutter control, freeze,
H/V flip (mirror picture), rotation
Text display
title and camera ID
Activity detection
yes
Motion detector
3 zones, ON/OFF switchable, vertical, horizontal & vertical
Digital zoom
2x ~ 32x
Lens type
fixed focal length
Focal length
3mm
Horizontal angle of view
77.4°
Aperture range (F)
F1.8
33
Optional Accessories
The optional accessories currently available can be found on our Homepages: www.videor.com and
www.eneo-security.com
Video outputs
HD-SDI, CVBS, HD-SDI (BNC), 1Vp-p, (C)VBS, 75ohms, BNC
Alarm inputs
no
Alarm outputs
1
e-PTZ support
yes
Illumination
no
External connections
12VDC power input, RS-485, HD-SDI BNC output, video (BNC)
Serial interfaces
RS-485
Serial interfaces protocols
Pelco D, Pelco P
Housing
outdoor
Housing material
aluminium
Colour (bubble)
clear
Colour (housing)
Pantone Warm Gray 1C
Heater
no
Blower
no
Mounting
wall mount, ceiling mount
Supply voltage
12VDC, (+/-10%)
Power consumption
2.5W
Temperature range (operation)
-10°C ~ +50°C
Protection rating
IP66
Vandalism resistant
yes
Dimensions
see drawings
Weight
410g
Parts supplied
screw set, manual
Certificates
CE
Page is loading ...
Page is loading ...
36
Technische Änderungen vorbehalten.
Technical changes reserved.
© Copyright by VIDEOR E. Hartig GmbH 02/2012
eneo
®
ist eine eingetragene Marke der Videor E. Hartig GmbH
Vertrieb ausschließlich über den Fachhandel.
eneo
®
is a registered trademark of Videor E. Hartig GmbH
Exclusive distribution through specialised trade channels only.
VIDEOR E. Hartig GmbH
Carl-Zeiss-Straße 8 · 63322 Rödermark/Germany
Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-100
www.videor.com
www.eneo-security.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Eneo HDD-2110M1080 Installation And Operating Instructions Manual

Eneo
Brand
Eneo
Model
HDD-2110M1080
Category
Security cameras
Type
Installation And Operating Instructions Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents