Instruction Manual for V.FLASH
TM
Memory Card
Thanks for purchasing the VTech
®
V.FLASH
TM
Memory Card!
Please carefully read this instruction manual before using this
product and keep this manual for future reference.
You can save your game records from certain V.DISC titles on
the memory card. Then you can load those records from the
card and continue playing the next time you play the V.DISC.
You can also delete any record from the card when it’s inserted
into the V.FLASH
TM
main unit.
HOW TO USE THE V.FLASH
TM
MEMORY CARD:
• Make sure to turn off the main unit before inserting or removing
the memory card.
• Hold the memory card with the arrow facing up, and securely
insert the card into the Memory Card port on the front of the
V.FLASH
TM
main unit.
Instruction Manual for V.FLASH
TM
Memory Card
• Saving, loading methods and the amount of memory required
may vary depending on the V.DISC title.
•
Data can be saved or deleted even when not playing a game.
For details, please refer to the main unit user’s manual and
specific V.DISC title user’s manual.
PRECAUTIONS
• Do not remove the card while saving, as doing so may cause
data loss or corruption and damage to the card.
•
Do not repeatedly turn off or reset the main unit when a
memory card is inserted in the main unit, as doing so may
cause data loss or corruption.
•
Do not expose the card to high temperatures, high humidity or
direct sunlight.
•
Do not allow liquid or small particles to get into the card.
•
Do not put heavy objects on the card.
• Never attempt to disassemble or modify the card.
•
Do not bend, throw or drop the card.
•
Do not expose the card to static electricity.
•
Do not touch the metal parts or insert foreign objects into the
card.
Instruction Manual for V.FLASH
TM
Memory Card
• When cleaning the card, please use a soft and dry cloth. Do
not use solvents or other chemicals.
Data will not be lost under normal operating conditions because
this product incorporates memory that does not require battery
backup. The memory card has limited capacity for rewriting
over saved data. If you want to save new data but there’s not
enough memory left on the card, you need to delete some old
data. After repeated use, this card may lose the ability to save
data. If you find that your card can no longer save data, please
use a new memory card.
NOTICE
The V.FLASH
TM
Memory Card has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation.
Instruction Manual for V.FLASH
TM
Memory Card
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
Caution: changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN
ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À
LA NORME NMB-003 DU CANADA.
Made in China
/