2. Nikon
  3. WR-R11b
WR-R11b

Nikon WR-R11b, WR-R11a Reference guide

  • Hello! I am an AI chatbot trained to assist you with the Nikon WR-R11b Reference guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What functions does WR-R11a/WR-R11b serve?
    How to pair WR-R11a/WR-R11b and WR-T10?
    How many cameras can be controlled simultaneously using the WR-T10?
    What are the three channels supported by WR-R11a/WR-R11b?
    How can I remove the battery from the WR-T10?
WR-R11a
WR-R11b
WR-T10
Reference Manual
Wireless Remote Controller
• Read this manual thoroughly before using the product.
• To ensure proper use of the product, be sure to read
“For Your Safety” (page ix).
• After reading this manual, keep it in a readily accessible
place for future reference.
En
ii
What the WR-R11a/WR-R11b Can Do for You
The WR-R11a/WR-R11b can be used in combination with other
devices to control cameras or flash units. It can also be used to
release the shutters on multiple cameras simultaneously.
❚❚
Remote Release with the WR-T10
A WR-T10 wireless transmitter can be
used to release the shutter on a camera
to which a WR-R11a/WR-R11b is
attached (
0
8).
❚❚
Simultaneous Release with the WR-T10
Attach WR-R11a/WR-R11b units to
multiple cameras and press the shutter-
release button on the WR-T10 to release
the shutters simultaneously on all
cameras (
0
11).
WR-R11a Model Name: N2012
WR-R11b Model Name: N1839
What the WR-R11a/WR-R11b Can Do for
You
iii
What the WR-R11a/WR-R11b Can Do for You
❚❚
Synchronized Release with the WR-R11a/
WR-R11b
Attach WR-R11a/WR-R11b units to
multiple cameras for synchronized
shutter release controlled by a single
camera (
0
13).
❚❚
Using the WR-R11a/WR-R11b with WR-1 Wireless
Remote Controllers
In combination with a WR-1 wireless
remote controller, the WR-R11a/
WR-R11b can be used for interval-timer
photography—in which the camera
takes a selected number of shots
automatically at preset intervals—and
long time-exposures, as well as for simultaneous and
synchronized release (
0
18).
iv
What the WR-R11a/WR-R11b Can Do for You
❚❚
Using the WR-R11a/WR-R11b with SB-5000 Flash
Units
Control flash units remotely via radio
(radio AWL). Flash settings for the
SB-5000, including flash control mode
and flash output, can be adjusted from
the camera (
0
24).
❚❚
Controlling Devices on Different Channels
The WR-R11a/WR-R11b supports three
channels: 5, 10, and 15. Devices
connected via different channels can be
controlled separately simply by
switching the channel (
0
34).
15CH
15CH
15CH
10CH
10CH
10CH
5CH
5CH
5CH
v
Supplied Accessories
This manual assumes that your WR-R11a or WR-R11b comes
bundled as a kit with the purchase of a WR-T10. Depending on
whether it is part of a kit, the accessories supplied will vary.
Contact your retailer should you notice anything missing.
* Remove the insulating sheet from the WR-T10 before first use.
Supplied Accessories
Purchase includes Supplied accessories
A WR-R11a and
WR-T10
❏
Strap for WR-R11a or WR-R11b
❏
Strap for WR-T10
❏
CR2032 3 V lithium battery *
❏
Case
❏
User’s Manual
❏
Warranty
A WR-R11b and
WR-T10
A WR-R11a
❏
Strap for WR-R11a or WR-R11b
❏
Case
❏
User’s Manual
❏
Warranty
A WR-R11b
vi
About This Manual
A WR-T10 transmitter can be used for wireless remote control of
a compatible Nikon camera to which a WR-R11a/WR-R11b
transceiver has been attached. The WR-R11a/WR-R11b can also
be used in combination with a WR-1 wireless remote controller
or for radio control of SB-5000 flash units. Before using this
product, please read this Reference Manual carefully. You will
also need to consult the camera manual.
The WR-R11a is for use with cameras with a ten-pin remote
terminal, the WR-R11b for use with cameras with an accessory
terminal.
❚❚
Symbols
The following symbols are employed in this manual. Use them
to help locate the information you need.
A
For Your Safety
“For Your Safety” contains important safety instructions. Be sure to read
them before using the product. For more information, see “For Your
Safety” (
0
ix).
About This Manual
D
This icon marks notes, information that should be read before
using this product.
A
This icon marks tips, additional information you may find
helpful when using this product.
0
This icon marks references to other sections in this manual.
vii
Table of Contents
What the WR-R11a/WR-R11b Can Do for You .............................. ii
Supplied Accessories ............................................................................. v
About This Manual................................................................................. vi
For Your Safety........................................................................................ ix
Wireless Regulation Data............................................ xiii
Notices............................................................................... xvi
Getting Started 1
Parts of the Controller ........................................................................... 1
WR-R11a............................................................................... 1
WR-R11b .............................................................................. 1
WR-T10 ................................................................................. 2
Attaching the WR-R11a/WR-R11b (Transceiver).......................... 5
Attaching the WR-R11a.................................................. 5
Attaching the WR-R11b.................................................. 6
Using the WR-R11a/WR-R11b with the WR-T10: The Basics.... 8
Pairing the WR-R11a/WR-R11b and WR-T10 .......... 8
Taking Pictures................................................................ 10
Table of Contents
viii
Table of Contents
Advanced Use 11
Applications for the WR-R11a/WR-R11b and WR-T10 ............. 11
Simultaneous Release with the WR-T10 ................ 11
Synchronized Release with the WR-R11a/
WR-R11b........................................................................ 13
Using the WR-R11a/WR-R11b with Other Devices.................... 18
Using the WR-R11a/WR-R11b with WR-1
Wireless Remote Controllers ................................. 18
Using the WR-R11a/WR-R11b with SB-5000
Flash Units .................................................................... 24
Channel Selection ................................................................................. 34
Technical Notes 35
Status LEDs .............................................................................................. 35
WR-R11a/WR-R11b ........................................................ 35
WR-T10 ............................................................................... 39
Specifications.......................................................................................... 40
WR-R11a/WR-R11b Wireless Remote
Controller...................................................................... 40
WR-T10 Wireless Remote Controller ....................... 41
ix
For Your Safety
To prevent damage to property or injury to yourself or to others, read “For
Your Safety” in its entirety before using this product.
Keep these safety instructions where all those who use this product will
read them.
For Your Safety
A
DANGER: Failure to observe the precautions marked with this icon
carries a high risk of death or severe injury.
A
WARNING: Failure to observe the precautions marked with this icon
could result in death or severe injury.
A
CAUTION: Failure to observe the precautions marked with this icon
could result in injury or property damage.
A
WARNING
Do not use while walking or operating a vehicle.
Failure to observe this precaution could result in accidents or other
injury.
Do not disassemble or modify this product.
Do not touch internal parts that become exposed as the result of a
fall or other accident.
Failure to observe these precautions could result in electric shock or
other injury.
Should you notice any abnormalities such as the product producing
smoke, heat, or unusual odors, immediately disconnect the
batteries or power source.
Continued operation could result in fire, burns or other injury.
x
For Your Safety
Keep dry.
Do not handle with wet hands.
Failure to observe these precautions could result in fire or electric shock.
Do not use this product in the presence of flammable dust or gas
such as propane, gasoline or aerosols.
Failure to observe this precaution could result in explosion or fire.
Keep this product out of reach of children.
Failure to observe this precaution could result in injury or product
malfunction.
In addition, note that small parts constitute a choking hazard.
Should a child swallow any part of this product, seek immediate medical
attention.
Do not entangle, wrap or twist the straps around your neck.
Failure to observe this precaution could result in accidents.
Do not use batteries not specifically designated for use with this
product.
Failure to observe this precaution could result in fire or electric shock.
A
CAUTION
Turn this product off when its use is prohibited.
Disable wireless features when the use of wireless equipment is
prohibited.
The radio-frequency emissions produced by this product could interfere
with equipment onboard aircraft or in hospitals or other medical
facilities.
xi
For Your Safety
Remove the battery if this product will not be used for an extended
period.
Failure to observe this precaution could result in fire or product
malfunction.
Do not leave the product where it will be exposed to extremely high
temperatures, for an extended period such as in an enclosed
automobile or in direct sunlight.
Failure to observe this precaution could result in fire or product
malfunction.
A
DANGER (Batteries)
Do not mishandle batteries.
Failure to observe the following precautions could result in the battery
leaking, overheating, rupturing, or catching fire:
•
Do not attempt to recharge the battery.
•
Do not expose batteries to flame or excessive heat.
•
Do not disassemble.
•
Do not short-circuit the terminals by touching them to necklaces,
hairpins, or other metal objects.
•
Do not expose batteries or the products in which they are inserted to
powerful physical shocks.
If battery liquid comes into contact with the eyes, rinse with plenty
of clean water and seek immediate medical attention.
Delaying action could result in eye injuries.
xii
For Your Safety
A
WARNING (Batteries)
Keep batteries out of reach of children.
Should a child swallow a battery, seek immediate medical attention.
Do not immerse batteries in water or expose to rain.
Failure to observe this precaution could result in fire or product
malfunction. Immediately dry the product with a towel or similar object
should it become wet.
Discontinue use immediately should you notice any changes in the
battery, such as discoloration or deformation.
Failure to observe this precaution could result in the battery leaking,
overheating, rupturing, or catching fire.
Insert the battery in the correct orientation.
Failure to observe this precaution could result in the battery leaking,
overheating, rupturing, or catching fire.
When batteries are no longer needed, insulate the terminals with
tape.
Overheating, rupture, or fire may result should metal objects come into
contact with the terminals.
If battery liquid comes into contact with a person’s skin or clothing,
immediately rinse the affected area with plenty of clean water.
Failure to observe this precaution could result in skin irritation.
xiii
For Your Safety
Wireless Regulation Data
The use of wireless devices may be prohibited in some countries or
regions. Contact a Nikon-authorized service representative before using
the wireless features of this product outside the country of purchase.
Notice for Customers in the U.S.A. and Canada
This device complies with part 15 of FCC Rules and Innovation, Science
and Economic Development Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC WARNING
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved by
Nikon Corporation may void the user’s authority to operate the
equipment.
FCC Radio Frequency Interference Statement
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/ TV technician for help.
xiv
For Your Safety
Co-location
This transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter.
Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064,
U.S.A.
Tel.: 631-547-4200
FCC/ISED RF Exposure Statement
The available scientific evidence does not show that any health problems
are associated with using low power wireless devices. There is no proof,
however, that these low power wireless devices are absolutely safe. Low
power Wireless devices emit low levels of radio frequency energy (RF) in
the microwave range while being used. Whereas high levels of RF can
produce health effects (by heating tissue), exposure of low-level RF that
does not produce heating effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological
effects. Some studies have suggested that some biological effects might
occur, but such findings have not been confirmed by additional research.
This product has been tested and found to comply with FCC/ISED
radiation exposure limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of
the ISED radio frequency (RF) Exposure rules. Please refer to the SAR test
report that was uploaded to FCC website.
xv
For Your Safety
Notice for Customers in Europe and in Countries Complying with
the Radio Equipment Directive
Hereby, Nikon Corporation declares that the radio equipment
types WR-T10, WR-R11a, and WR-R11b are in compliance with
Directive 2014/53/EU.
The full texts of the EU declarations of conformity are available
at the following internet addresses:
•
WR-T10: https://imaging.nikon.com/support/pdf/DoC_WR-T10.pdf
•
WR-R11a: https://imaging.nikon.com/support/pdf/DoC_N2012.pdf
•
WR-R11b: https://imaging.nikon.com/support/pdf/DoC_N1839.pdf
Notice for Customers in Singapore
Notice for Customers in Malaysia
Notice for Customers in Australia and New Zealand
This device complies with radio-frequency regulations. The content of
certification labels not affixed to the device is given below.
Complies with
IMDA Standards
DA103423
xvi
For Your Safety
Notices
About This Manual
•
In the absence of prior permission, reproduction or distribution of the
User’s Manual, Reference Manual, or online manuals for this product,
whether in whole or in part, is strictly prohibited.
•
Nikon reserves the right to change the appearance, specifications, and
performance of the product described in this manual without prior
notice.
•
Nikon will not be held liable for damages that may result from any
mistakes that this manual may contain.
Export
This product is controlled by the United States Export Administration
Regulations (EAR). The permission of the United States government is not
required for export to countries other than the following, which as of this
writing are subject to embargo or special controls: Cuba, Iran, North
Korea, Sudan, and Syria (list subject to change).
Notice for Customers in Canada
CAN ICES-3 B / NMB-3 B
Notices for Customers in Europe
This symbol indicates that electrical and electronic
equipment is to be collected separately.
The following apply only to users in European countries:
•
This product is designated for separate collection at an
appropriate collection point. Do not dispose of as
household waste.
•
Separate collection and recycling helps conserve natural
resources and prevent negative consequences for human
health and the environment that might result from incorrect disposal.
•
For more information, contact the retailer or the local authorities in
charge of waste management.
1
Parts of the Controller
Getting Started
WR-R11a
WR-R11b
Parts of the Controller
qwe
t
y
r
u
1
Red LED
2
Channel selector
3
Green LED
4
Pairing button
5
Strap eyelet
6
Locking screw
7
Mounting mark (
d
)
y
t
q
w
e
r
1
Red LED
2
Channel selector
3
Green LED
4
Pairing button
5
Strap eyelet
6
Mounting mark (
d
)
2
Parts of the Controller
WR-T10
t
r
y
q
w
e
1
Shutter-release button
2
Fn button
3
Strap eyelet
4
Red LED
5
Channel selector
6
Pairing button
3
Parts of the Controller
A
Straps for the WR-R11a and WR-R11b
Attach the controller to the camera strap as shown to prevent it being lost
or dropped.
A
The WR-T10 Fn Button
The function performed by pressing the Fn button on the WR-T10 is
assigned by the camera. Its role varies depending on the camera to which
the WR-R11a/WR-R11b is attached.
•
In the case of cameras with menu items controlling the behavior of Fn
buttons on remote controllers ([Assign remote (WR) Fn button],
[Assign remote Fn button], [Accessory terminal], or [Remote
control]), it performs the role assigned in the menus. The name of the
relevant menu item and its location vary with the camera.
- If you are using a D4, D800, or D800E, be sure the camera firmware is
up-to-date.
•
In the case of the D7100, D5300, and D5200, it performs the same role as
the camera Fn button.
•
With all other cameras, it activates the standby timer.
4
Parts of the Controller
A
Replacing CR2032 3 V Lithium Batteries
Replace the battery when the LED for the WR-T10 starts to dim. Insert a
fingernail behind the battery-chamber latch and open the battery
chamber (
q
). Ensure that the battery is inserted in the correct orientation
(
e
).
q
we
r
/