Assembly of the Connector:
INFO to the screw driver:
Place bushing and chuck over cable.
Prepare cable as shown.
Insert wires into terminals and secure clamp
terminals with screw driver (Pozidrive ).
For easy wiring especially on big cables, first
screw on the inner conntacts 1+ and 2+ and
afterwards the outer contacts 1- and 2- !
Push chuck up to housing .
Tighten the bushing
Pozidrive #1 Philips
Important is the stripping length of 25 mm and
12 mm.
®
Important: Align the chuck by positioning
the nose into the recess.
DO NOT USE!
12 mm [0.5"]
25 mm [1.0"]
A
B
C
D
E
A
B
C
F
F
2+
1+
1-
2-
2+
2-
1-
1+
D
E
ASSEMBLY INSTRUCTION
NL4FX / NL4FRX
speakON SPX Series Lockable Loudspeaker Connector
®
R
Page 1
IMPORTANT SAFETY INSTRUCTION
Electrical Rating acc. UL & CSA:
USR: 40A/250V, CNR: 25A/250V
“CAUTION: NOT FOR INTERRUPTING CURRENT”
ATTENTION: NE PAS UTILISER POUR COUPER LE COURANT”
“
