The Great Outdoors 9016-66 User manual

The Great Outdoors
Brand
The Great Outdoors
Model
9016-66
Type
User manual

The Great Outdoors 9016-66 is a stylish and functional outdoor lantern that provides ample illumination for your outdoor space. Its durable construction ensures longevity, while its classic design adds a touch of elegance to your décor. With its easy installation process, you can quickly and effortlessly mount it on a post, providing ample lighting for pathways, patios, and other outdoor areas. The lantern accommodates three 60W/E12/B bulbs (not included), allowing you to customize the brightness to suit your needs.

The Great Outdoors 9016-66 is a stylish and functional outdoor lantern that provides ample illumination for your outdoor space. Its durable construction ensures longevity, while its classic design adds a touch of elegance to your décor. With its easy installation process, you can quickly and effortlessly mount it on a post, providing ample lighting for pathways, patios, and other outdoor areas. The lantern accommodates three 60W/E12/B bulbs (not included), allowing you to customize the brightness to suit your needs.

INSTALLATION INSTRUCTIONS
Model # 9016
READ AND SAVE THESE INSTRUCTIONS
WARNING ! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
1. Shut off power at the circuit breaker and remove old
fixture including mounting hardware.
2. Carefully unpack your new fixture and lay out all the
parts in a clear area. Take care not to misplace any
small parts necessary for installation.
3. Unscrew the cap nut (F) then move the top cover (J),
insert the nipple(C) with the rubber (B) and the finial (A)
into the top cover (J), have the key washer (D) through
the nipple (C) with the hex nut (E) tightly inside the top
cover (J) (Fig.1).
4. Pull black, white and ground wires out of post (I).
5. Connect electrical wires while supporting the lantern. If
your post has a ground wire (green or bare copper),
connect the fixture ground wire to it. If not, consult your
electrician for proper grounding. After wires are
connected, tuck them carefully inside the post cup (G).
Align the lantern with post (I) and secure with sheet
metal screws (H). (Fig.1&2)
6. At this point, install 3*60W/E12/B bulb (no bulb
included) in accordance with the fixture specification—
DO NOT EXCEED THE MAXIMUM WATTAGE
RATING! (NE PAS DEPASSER LA PUISSANCE
NOMINALE MAXIMALE!)
7. Replace the top cover (J) and secure with cap nut (F).
Your installation is now complete. Return power to and test
the fixture.
Fig. 1
BARE COPPER(GROUND)
Fig.2
FIXTURE
WIRES
WHITE
BLACK
(HOT)
WIRES
HOUSE
GREEN OR
WHITE
(NEUTRAL)
WIRES
HOUSE
(GROUND)
COPPER
BARE
FIXTURE
WIRES
BLACK
WIRES
FIXTURE
GREEN OR
HOUSE
WIRES
“CAUTION-RISK OF FIRE CONSULT A
QUALIFIED ELECTRICIAN TO ENSURE
CORRECT BRANCH CIRCUIT CONDUCTOR”
ATTENTION – RISQUE D’INCENDIE, CONSULTER UN
ÉLECTRICIEN QUALIFIÉ POUR VOUS ASSURER QUE
LES CONDUCTEURS DE LA DÉRIVATION SONT
ADÉQUATS.
  • Page 1 1

The Great Outdoors 9016-66 User manual

The Great Outdoors
Brand
The Great Outdoors
Model
9016-66
Type
User manual

The Great Outdoors 9016-66 is a stylish and functional outdoor lantern that provides ample illumination for your outdoor space. Its durable construction ensures longevity, while its classic design adds a touch of elegance to your décor. With its easy installation process, you can quickly and effortlessly mount it on a post, providing ample lighting for pathways, patios, and other outdoor areas. The lantern accommodates three 60W/E12/B bulbs (not included), allowing you to customize the brightness to suit your needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents