Page is loading ...
AC1300 High Gain
Wireless Dual Band USB Adapter
7106507118 REV3.1.0
Quick
Installation
Guide
WPS
MODEL NO. Archer T4UH
Connect to a Computer
1 2
Install Driver and Utility
Insert the CD.
Browse the CD, go to Archer T4UH > Mac OS
X Driver, unzip the Mac OS X version.zip file
and run the Installer.
3
Join a Wireless Network
For Mac OS X
Option 1: Directly Option 2: Via the USB Cradle
WPS
uninstall.commandInstaller.pkg
SHELL
Follow the wizard to complete the installation.
b.
a.
c.
Note:
You can also download the driver and utility at
www.tp-link.com.
Option 1: Via TP-LINK Utility Option 2: Via Wi-Fi Protected Setup (WPS)
a. Click (TP-LINK Wireless Configuration
Utility) on the menu bar.
b. Select your Wi-Fi network and enter the Wi-Fi
password when prompted.
a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS button
on the adapter until WPS Progress screen appears.
c. When you are prompted “WPS Protocol Finished!”,
click OK.
Fri 5:14 PM
TP-LINK_0903
TP-LINK_
0210
TP-LINK_0001
TP-LINK_XXXX
Join Other Network
WPS
Open Wireless Utility
USB-WiFi: On
Turn USB-WiFi Off
Connect to a Computer
1
For Windows
Option 1: Directly Option 2: Via the USB Cradle
Note:
In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.
WPS
This USB Adapter can only be powered by computers that comply with
Limited Power Source (LPS).
2
Install Driver
Insert the CD and run the Autorun.exe from
the pop-up Autoplay window.
Setup Wizard
Browse CD
EXIT
Archer T4UH
Install Driver
User Guide
Select Archer T4UH and click Install Driver,
then follow the InstallShield Wizard to
complete the installation.
Notes:
1. You can also download the driver at www.tp-link.com.
2. In some operating systems, the CD screen will pop up
automatically. Otherwise, run the CD manually.
a.
b.
3
Join a Wireless Network
Option 2: Via TP-LINK Utility
Select your Wi-Fi network from the pop-up
utility window and click Connect. The symbol
indicates a successful connection.
Network Name(SSID)
Channel
Signal
Security
2 (2.4G)
5 (2.4G)
44 (5G)
None
WPA/WPA2-Personal
None
TP-LINK_0001
TP-LINK_0201
TP-LINK_0903
6 (2.4G)
TP-LINK_XXXX
Connect automatically
WPA/WPA2-Personal
Connect
Status WPS Profile AdvancedNetwork
TP-LINK_0903
Network Na
TP-LINK_XXXX
Note:
In Windows XP, if you have installed TP-LINK Utility, you
need to switch to Windows wireless configuration tool first.
Click or (Network icon) on the taskbar,
select your Wi-Fi network, and click Connect.
Option 1: Via Windows Wireless Utility
Option 3: Via Wi-Fi Protected Setup (WPS)
a. Press the WPS button on your router.
c. When you are prompted “Successfully connected to
the network by WPS!”, click OK.
b. Within 2 minutes, press and hold the WPS button on
the adapter until the configuring screen appears.
Note:
During the installation, select TP-LINK Wireless Configuration
Utility and Driver if you want to use TP-LINK Utility and WPS
function.
Networks
Connect automatically Connect
√
Wi-Fi
TP-LINK_XXXX
TP-LINK_0903
TP-LINK_0001
For more information, please visit our website
www.tp-link.com
©2017 TP-LINK
/