2. TP-LINK
  3. Archer T2UH
Archer T2UH

TP-LINK Archer T2UH Quick Installation Guide

  • Hello! I am an AI chatbot trained to assist you with the TP-LINK Archer T2UH Quick Installation Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I connect the TP-LINK Archer T2UH to my computer?
    How do I install the driver and utility for the TP-LINK Archer T2UH?
    How do I join a wireless network using the TP-LINK Archer T2UH?
    How do I connect to a wireless network using TP-Link Utility?
    How do I connect to a wireless network using Wi-Fi Protected Setup (WPS)?
Wireless Utility
Profile Link Status Site Survey Statistics
WPS
About
AP List
Disconnected!!
RESCAN CONNECT ADD PROFILE
SSID
BSSID
Encr…
Authe…
Channel Network Type
Signal
TP-Link_XXXX 72 - 10 -18 - 01 - 00 - 03
TP-Link_TEST_
TP-Link_0903
TP-Link_0001_5 00 - 10 -18 - A9 - 5D - 8D
00 - 51 - E1 - 02 - 20 - 44
02 - 10 -18 - 01 - 00 - 02
4 11 WPA2- PS AES Infrastructure
Infrastructure
Infrastructure
Infrastructure
AES
NONE
NONE
WPA2- PS
Open
Open
36
6
4842
5
50
WPS
PBC - Scanning AP
a. Download the driver and utility from this
product’s Support page at
www.tp-link.com.
Note:
If your computer has a CD drive, you can also run the
included CD to install the driver and utility.
b. Unzip the downloaded folder and run the
Installer.pkg.
c. Follow the instructions to complete the
installation.
For Mac OS X
uninstall.commandInstaller.pkg
SHELL
Option 1: Via TP-Link Utility Option 2: Via Wi-Fi Protected Setup (WPS)
a. Select the Site Survey tab of the pop-up
utility window.
b. Select your Wi-Fi network and click
CONNECT. The connection status can
be viewed on the Link Status screen.
a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS
button on the adapter until the WPS
progress window appears.
c. When the "PBC-Get PBC prole successfully"
message appears, it is complete.
AC600 High Gain Wireless
Dual Band USB Adapter
MODEL NO. Archer T2UH
Quick Installation Guide
1 Connect to a Computer 2 Install Driver and Utility 3 Join a Wireless Network
Option 1: Directly Option 2: Via the USB Extension Cable
Connections are available
Wireless Network Connection
Connect automatically
Connect
√
TP-Link_XXXX
TP-Link_XXXX_5G
c. When the "Success!" message appears, your
computer is connected to Wi-Fi.
For Windows
Option 1: Via Windows Wireless Utility
a. Click the network icon ( or ) on the
taskbar.
b. Select your Wi-Fi network, click Connect
and enter the password when prompted.
Option 2: Via WPS Tool
a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS
button on the adapter until WPS Tool opens.
7106507558 REV3.2.0
1 Connect to a Computer
3 Join a Wireless Network
2 Install Driver and WPS Tool
This USB Adapter can only be powered by computers that comply with
Limited Power Source (LPS).
For detailed instructions, please refer to the
User Manual from this product’s Support
page at www.tp-link.com.
For technical support and other information,
please visit http://www.tp-link.com/support,
or simply scan the QR code.
©2017 TP-Link
Option 1: Directly Option 2: Via the USB Extension Cable
Note:
In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.
a. Insert the CD and run the Autorun.exe.
Note:
You can also download the driver from this product’s
Support page at www.tp-link.com.
b. Select Archer T2UH and follow the
steps to install the driver and WPS Tool.
Note:
If you can’t install the driver successfully, disable the
antivirus software and firewall, then try again.
WPS
Cancel
WPS
Cancel
Archer T2UHArcher T2U
/