CONVENIENCE
CONCEPTS
203240W/203240BL
Omega
3 Tier Bookcase
Please do not return to the store
Broken or missing Hardware?
Neen help with Assembly?
If you have any questions just call 1-800-468-6447 or email us at
Assembly Instructions
We have designed our furniture with you,the customer in mind.Our clear,easy to follow
step by step instructions will guide you through the project from start to finish.
Feel confident that this will be a fun and rewarding project. The final product will be a quality piece of
furniture that will go together smoothly and give years of enjoyment.
1 1PC
2 2PCS
3 2PCS
4 2PCS
5 1PC
6 1PC
F 2PCS
G 2PCS
H 2PCS
A 12PCS B 12PCS C 8PCS
D
8PCS
E
8PCS
I 12PCS
Gently screw cam
bolt into the
threaded anchor.
Insert cam lock with
arrow pointing down.
Screw the cam firmly
into locked position.
Assembling the unit with cams.
*Special NoteW e recommend the use of a hand held screwdriver to avoid the stripping of screw heads.*
Bolt Lock Nut Cam Bolt Cam Lock Screw Anti-Tip Small Anchor Stickers
Bracket Screw
Page 2 of 4
Top Panel
Top Support Bars Back Support Bars
Shelves Right Panel Left Panel
NOTE: Assemble unit on carpet or other soft surface to avoid scratching.
Step 1
Step 2
1.Screw Cam Bolts (C) into Left panel
2.Attach Left panel to assembly using
Cam Bolts C) , Cam Lock (D) , Lock Nut (B)
and Bolts (A).
2
3
3
4
4
5
A
A
A
A
A
A
B
B
B
B
B
B
C
D
D
2
C
C
D
D
C
6
B
B
B
B
B
B
C
C
D
D
A
A
A
A
A
A
C
C
D
D
2
2
3
3
4
4
1.Screw Cam Bolts (C) into Right Panel .
2.Attach Shelves to right panel using Bolts (A) and Lock nutsB
4
5
3.Attach Top Support Bars to right panel using Bolts (A) and Lock NutsB).
4.Attach Back Support Bars to right panel using Cam BoltC) and
Cam Lock (D).
2
5
*Take extra care with Support Bar
and while they are awaiting step 2.*
3
5
2
3
6
6
*Refer to page 2 for cam lockbolt assembl y.*
Make sure threaded hole of lock nut (B) faces direction of bolt (A) entrance hole.
Page 3 of 4
5
6 X
(A)
6 X
(B)
4 X
(C)
4 X
(D)
6 X
(A)
6 X
(B)
4 X
(C)
4 X
(D)
Step 3
1.Attach Top Panel to assembly using Screws E).
2.Attach Anti-Tip Bracket (F) to back of unit using Screws (G).
1
E
E
E
E
E
E
2
2
F
G
G
F
Step 4
1.If desired place Stickers (I) over bolt holes.
2.Place unit into desired location and mark Anti-Tip
bracket’s (F) holes with pencil and remove unit.
3.Drill holes into wall slightly smaller then Anchors (H)
and gently tap Anchors (H) into wall.
4.Reposition unit and fasten to wall using Screws (E)
and Anti-Tip brackets (F).
I
I
I
I
I
I
I
I
I
I
I
I
E
H
E
H
1
6 X
(E)
2 X
(F)
2 X
(G)
2 X
(E)
2 X
(H)
12 X
(I)
Page 4 of 4
/
