Poewit WAP-1 User guide

Brand: Poewit

Model: WAP-1

Type: User guide

Poewit WAP-1 is a cloud-intelligent Wi-Fi 6 wireless access point designed for enterprise-class, ultra-high-density environments. It features 8x8 MU-MIMO and OFDMA technology, allowing it to handle multiple devices and applications simultaneously with low latency and high throughput. The WAP-1 also supports WPA3 encryption, providing enhanced security for your wireless network. With its easy installation and configuration process, the Poewit WAP-1 is an ideal solution for businesses and organizations looking to upgrade their Wi-Fi network to the latest Wi-Fi 6 standard.

Poewit WAP-1 is a cloud-intelligent Wi-Fi 6 wireless access point designed for enterprise-class, ultra-high-density environments. It features 8x8 MU-MIMO and OFDMA technology, allowing it to handle multiple devices and applications simultaneously with low latency and high throughput. The WAP-1 also supports WPA3 encryption, providing enhanced security for your wireless network. With its easy installation and configuration process, the Poewit WAP-1 is an ideal solution for businesses and organizations looking to upgrade their Wi-Fi network to the latest Wi-Fi 6 standard.

poewit.com

WITH 8X8

CLOUD-INTELLIGENT

Enterprise-Class | Ultra-High-Density

WI-FI 6 WIRELESS

ACCESS POINT

QUICK START GUIDE

WAP-1

poewit.com

INSTALLATION AND SETUP

1

WARNING

BEFORE PROCEEDING, EXAMINE AP MOUNTING TO ENSURE THERE

IS AN AIR GAP BETWEEN THE BACK OF THE AP HOUSING AND THE

MOUNTING SURFACE. AIR FLOW IS IMPORTANT TO MAINTAINING A

LOW TEMPERATURE.

1) After mounting the WAP-1, connect an Ethernet cable (Cat5/6)

from the LAN1 port to the Router.

• Note: To achieve full power and wireless transmission, ensure

the PoE source is 802.3bt. Features will be limited when using

802.3at.

• Note: A blue LAN1 LED indicates a link of 2.5Gbps. An amber

LED indicates a link of 100/1000Mbps.

2) To configure the device, download the PoEWit App from Google

Play or the Apple App Store.

poewit.com

INSTALLATION AND SETUP

2

• Note: The WAP-1 and the mobile device running the PoEWit

App must be on the same external IP address and the same

local subnet.

3) Once powered On, the WAP-1 will automatically connect to the

internet, and the Power LED will appear blue when the device is

ready for operation.

4) There are two installation scenarios depending on whether or not

there is a wireless network already installed.

4a) With an Existing AP on the Network:

1. Connect to the existing AP using your mobile device.

 2.OpenthePoEWitApptodiscoverandcongurethenewWAP-1.

poewit.com

INSTALLATION AND SETUP

3

4b) With No Existing AP on the Network:

1. Connect to the newly-installed WAP-1 using the default

SSID and Passcode.

Default SSID and Passcode:

 2.OpenthePoEWitApptodiscoverandcongurethenewWAP-1.

3. Once the settings are saved, the WAP-1 will reboot and

lose connection to the mobile device. Allow 30 to 60

seconds for the WAP-1 to reestablish power.

SSID

poewit_2.4G_1

poewit_5.0G_1

poewitguest_2.4G

poewitguest_5.0G

Passcode

3301Andrews

3301Andrews

WelcomeGuest

WelcomeGuest

poewit.com

INSTALLATION AND SETUP

4

4. Once power is restored, connect to the new SSID you setup.

1
2
3
4
5

Poewit WAP-1 User guide

Brand: Poewit

Model: WAP-1

Type: User guide

Poewit WAP-1 is a cloud-intelligent Wi-Fi 6 wireless access point designed for enterprise-class, ultra-high-density environments. It features 8x8 MU-MIMO and OFDMA technology, allowing it to handle multiple devices and applications simultaneously with low latency and high throughput. The WAP-1 also supports WPA3 encryption, providing enhanced security for your wireless network. With its easy installation and configuration process, the Poewit WAP-1 is an ideal solution for businesses and organizations looking to upgrade their Wi-Fi network to the latest Wi-Fi 6 standard.

Download PDF

Related papers

Other documents