2. Hoymiles
  3. HRSD-1C Transmitter

Hoymiles HRSD-1C Transmitter Installation guide

  • Hello! I've reviewed the HRSD-1C Transmitter Installation Guide. This document outlines the installation procedure for the device, including ventilation specifications, proper connection sequences for input and output cables, and safety precautions. I'm ready to assist with any questions you have regarding the installation or use of the HRSD-1C.
  • What is the minimum space required for ventilation when installing the HRSD-1C?
    What is the correct order for connecting and disconnecting cables while installing the HRSD-1C?
    What is the HRSD-1C output voltage when transmitter signal is absent?
Home » hoymiles » hoymiles HRSD-1C Transmitter Installation Guide
HRSD-1C Quick Installation Guide
Contents
1 Appearance
2 Installation
3 Wiring
4 Documents /
Resources
5 Related Posts
Appearance
hoymiles HRSD-1C Transmitter Installation Guide
Manuals+ — User Manuals Simplified.
Installation
Note:
Allow a minimum of 1.5 cm of space between the roof and the HRSD-1C enclosure to ensure ventilation and
heat dissipation.
Wiring
· Connect modules to HRSD inputs.
Note:
When installing HRSD-1C, connect the input cables to the PV module before connecting the HRSD-1C output
cables in series.
If disconnecting HRSD-1C, disconnect the HRSD-1M output cables from the string before disconnecting the
input cables from the PV module.
Connectors from different manufacturers cannot be mated with each other.
Transmitter must be powered off during HRSD-1C installation.
HRSD-1C output Voltage is 0.9V to 1.1V when Transmitter “permission to operate” signal is not present.
Region: Global AP040555 REV1.1
© 2022 Hoymiles Power Electronics Inc. All rights reserved.
Documents / Resources
hoymiles HRSD-1C Transmitter [pdf] Installation Guide
HRSD-1C Transmitter, HRSD-1C, Transmitter
Manuals+,
/