Geotab IOX-WORKS Installation guide

Brand: Geotab

Model: IOX-WORKS

Type: Installation guide

Geotab IOX-WORKS is a versatile device that connects various truck equipment to Geotab's telematics platform, enabling real-time data monitoring and control. With its wide range of supported equipment, including plows, spreaders, and beacons, IOX-WORKS provides valuable insights into winter operations, such as material usage, plow blade position, and truck activity. The device's customizable mapping feature allows users to assign inputs to specific functions or equipment, enhancing data accuracy and usability.

Geotab IOX-WORKS is a versatile device that connects various truck equipment to Geotab's telematics platform, enabling real-time data monitoring and control. With its wide range of supported equipment, including plows, spreaders, and beacons, IOX-WORKS provides valuable insights into winter operations, such as material usage, plow blade position, and truck activity. The device's customizable mapping feature allows users to assign inputs to specific functions or equipment, enhancing data accuracy and usability.

ACE Ecobite + IOX-WRKS

ACE Chlorobite + IOX-WRKS

Field Services Installer Documentation:

IOX-WRKS

IOX-WRKS

Notice: Always use winter input mapping for telemetries

AUX5- Belly Plow or Manual Spreader, AUX6- Front Plow, AUX7- Wing Plow, AUX8- Tow Plow or Beacon

ACE Ecobite II to IOX-WRKS Primary port

IOX-WRKS primary port connects

(19200 baud) to the serial port

on the ACE Ecobiite II with cable HRN-FAI

IOX-WRKS primary port connects

(19200 baud) to the serial port

on the ACE Infobite with

cable HRN-FAI

ACE Ecobiite II controllers must be PRO version 4.6 or higher,

and have their GPS function activated with 15430-1 protocol.

Earlier models, and controllers that do not yet have activation

can be upgraded by contacting Ace Electronics

ACE Chlorobite controllers must be version 3.0 and have the

15430-1 emulation module.

Earlier models, or those without the 15430-1 module

can be upgraded by contacting Ace Electronics

To activate the GPS port:

1. Press the red and buttons together until “Config” is displayed (~3 seconds)

2. Rotate conveyor knob until Usine/Factory is displayed. Press the green button.

3. Rotate conveyor knob until GPSACT. Press the green button.

4. Enter the 6 digit port activation code provided by ACE.

Use the Spin knob to select the digit, and the green button to advance to the next character, and save.

After saving the code you will be exited to the previous menu.

5. Move to GPSPTC, presss the green button and using the spin knob, select 154301 protocol.

6. Press the green button to save this change, then press the red and green button together to exit back to main menu.

The ace controller is now configured to send data to the port and will be sending data.

ACE 15430-1 emulation module to IOX-WRKS Primary port

The ACE com port has +12V on pins 1 and 9, do not use a straight cable!

In manual mode the controller only sends totals, in Auto mode it will also send rates.

The ACE com port has +12V on pins 1 and 9, do not use a straight cable!

1

Geotab IOX-WORKS Installation guide

Brand: Geotab

Model: IOX-WORKS

Type: Installation guide

Geotab IOX-WORKS is a versatile device that connects various truck equipment to Geotab's telematics platform, enabling real-time data monitoring and control. With its wide range of supported equipment, including plows, spreaders, and beacons, IOX-WORKS provides valuable insights into winter operations, such as material usage, plow blade position, and truck activity. The device's customizable mapping feature allows users to assign inputs to specific functions or equipment, enhancing data accuracy and usability.

Related papers

Other documents