Angelo Decor AD93316 Operating instructions

Thank you for buying an Angelo Décor Fountain!

We hope you will find these instructions helpful in setting up your fountain.

If you have any issues with this item, please DO NOT return the unit to place of purchase.

Please visit our web site, www.angelodecor.com, for assistance and warranty information.

First unpack carton carefully, arranging parts safely in your working area.

This fountain is made from natural stone, setup may require 2 people.

Set the base in place. Connect the pump to the tubing Lower the main body onto

exiting the main body of the the base with the pump

fountain. attached as shown.

Secure the main body to the base using Add decorative rocks Set the top in place.

the screws and washers included as desired.

as shown above.

Secure the top in place at Attach the light cord to

the rear using the included the transformer as

screws and washers shown above.

as illustrated. This fountain includes an optional

planter feature. It can be used as

a planter, as shown above, or

without as shown in the final

assembly to the left.

Now simply fill with clean water and plug into a grounded GFCI outlet

We recommend keeping bowl 3/4 full of water to avoid pump burnout.