Strait-Flex WF-100 Specification

Type
Specification

Strait-Flex WF-100 is the fastest, cleanest, and most recommended compound applicator for vaulted ceilings. It is designed to apply a precise amount of compound, ensuring straight corners and perfect angles. The memory-free hinge design allows for ease of installation, while the diamond-punched 94 lb. paper edging provides faster feathering, drying, and the highest bonding strength. The PUR-laminated nose ensures perfect corners without paper fuzz-up during finishing and sanding. It is also rustproof and can be easily cut with a knife or scissors.

Strait-Flex WF-100 is the fastest, cleanest, and most recommended compound applicator for vaulted ceilings. It is designed to apply a precise amount of compound, ensuring straight corners and perfect angles. The memory-free hinge design allows for ease of installation, while the diamond-punched 94 lb. paper edging provides faster feathering, drying, and the highest bonding strength. The PUR-laminated nose ensures perfect corners without paper fuzz-up during finishing and sanding. It is also rustproof and can be easily cut with a knife or scissors.

C O M P O U N D A P P L I C A T O R
Product Description
n Designed to apply precise amount of compound.
n Mix and store compound in same bucket.
n Five-gallon capacity.
n No daily clean-up. Just fold legs; drop into 6” of water.
n Stainless steel construction for long-life.
Applications
n Inside and outside 90º corner beads.
n Inside and outside flex tapes.
n Outside bull-nose corner beads.
The Fastest,
and Cleanest,
Compound Applicator
A C C E L E R A T E P E R F E C T I O N
Highly recommended
for hard-to-straighten
vaulted ceilings.
L A M I N A T E D C O M P O s I T E
C O R N E R T A P E
Product Description
n Memory-free hinge design allows for ease of
installation, straight corners and perfect angles.
n Diamond-punched 94 lb. paper edging allows for
easier feathering, faster drying, and the highest
bonding strength. Also guarantees an even lay-down
of the paper, providing maximum adhesion with no
rippling or blistering.
n PUR-laminated nose ensures perfect corners without
paper fuzz-up during finishing and sanding.
n Prefinished surface. Just skim coat edges to finish.
n Rustproof.
n Cuts easily with knife or scissors.
n Straightens large framing irregularities.
n No cracks. No callbacks.
Applications
n Hard-to-straighten vaults.
n Butterfly vaults.
n Hard-to-straighten outside corners.
n Double 5/8” outside corners.
n Obtuse angles.
n Replacing damaged metal corner bead.
STRAIT-FLEX InTERnATIonAL, InC. o’FALLon, Mo
phonE: 888.747.0220 FAX: 636.300.0414
STRAITFLEX.CoM
L720310
Diamond-punched
pattern ensures
ultimate bonding and
faster drying.
Strait-Flex’s PVC
composite material
Memory-free
hinge design
allows for sharp
inside or outside
corners
Advantages over Competitors
STRAIT-FLEX COMPETITOR COMPETITOR
WIDE-FLEX 400 PAPER/PLASTIC FLEX PAPER/METAL FLEX
PUR-Laminated Nose No Protective Nose No Protective Nose
Diamond-Punched Formulated Surface Standard 84 lb. Paper
94 lb. Paper Paper
Superior Bond Adequate Bond Good Bond
Measurements Printed No Printing No Printing
in US and Metric
Printed Center Line No Printing No Printing
for Easy Alignment
Will Not Rust Will Not Rust Will Rust
C O L O R C O D E B L U E P h o n e : 8 8 8 - 7 4 7 - 0 2 2 0
Directions for Use
1 Cut Strait-Flex WIDE-FLEX
400
to desired length. Fold in half at center crease to
desired angle.
2 Using a 5” or 6” taping knife, apply a liberal coat of all-purpose joint compound
to inside or outside corners.
3 Press WIDE-FLEX
400
into wet compound. Adjust if necessary to create a straight
line. Wipe down with knife with additional pressure to the outer edge of
WIDE-FLEX
400
. Immediately apply light skim coat of joint compound to outer
edge and let dry.
4 Apply final coat, let dry, and sand.
Specifications
Warranty
Strait-Flex products are backed by a lifetime warranty. When applied to a sound
structure, built on a permanent foundation using recommended application
techniques, we warrant that these products will not edge-crack for the lifetime of
the structure. Contact Strait-Flex International, Inc. for complete details.
Storage
Store in a dry place protected from moisture.
Endorsements
Strait-Flex products are endorsed by the IUPAT (International Union of Painters
and Allied Trades) of North America. Strait-Flex products are used in their
day-to-day training curriculums.
Check out our website at www.straitflex.com
n
4” x 100’ roll size.
n Color Code BLUE
n Item# WF-100
UPC 6-56690-12373-6
n WHOLESALE PKG
7rls per case.
Case weight: 41 lbs.
24 cases per pallet.
  • Page 1 1
  • Page 2 2

Strait-Flex WF-100 Specification

Type
Specification

Strait-Flex WF-100 is the fastest, cleanest, and most recommended compound applicator for vaulted ceilings. It is designed to apply a precise amount of compound, ensuring straight corners and perfect angles. The memory-free hinge design allows for ease of installation, while the diamond-punched 94 lb. paper edging provides faster feathering, drying, and the highest bonding strength. The PUR-laminated nose ensures perfect corners without paper fuzz-up during finishing and sanding. It is also rustproof and can be easily cut with a knife or scissors.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI