3
#2
x4
#5
x1
#4
x4
#2
x3
#5
x1
#4
x3
#5
#2
#4
Lay front panel (part B) down on a soft flat surface,such as carpet as shown
below.Attach side panels (part C) to front panel (part B) using long bolts
(part #2),washers (part #4) and allen key (part #5).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
Attach bottom panel (part D) to side panels (part C) and front panel (part B)
using long bolts (part #2), washers (part #4) and allen key (part #5).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
#5
#2
#4