PALM HARBOR OUTDOOR
WICKER 29" BAR STOOL
CO7108-BR
PART LIST
HARDWARE LIST
Allen Key(M6mm)
Washer(M6mm)
Bolt(M6*20mm)
12pcs
D
E
F
G H
4pcs 16pcs
16pcs 1pc
A B C
1pc 2pcs
2pcs
Bolt(M6*40mm)
Foot panel
Screw cap(M6mm)
Seat
Stretcher
2
Step 1.
Step 2.
D
F
H
B
B
C
C
A
B
B
C
C
H
F
E
Attach foot panels (B) into stretcher (C). Please
do not screw at this step.
Lay seat (A) down on a flat surface.Attach assmbled parts B, C to the
seat (A) using bolts (D), washers (F), allen key (H) in vertical direction.
Cross direction by using bolts (E),washers (F), allen key (H).
NOTE: Do not fully tighten bolt until all bolts are in place.
X 8 X 12
D F
X 4
E
3
D
F
H
Step 4.
Tighten all bolts, and put Caps (G) on the head of bolts.
X 4 X 4
D F
A
B
B
C
C
Step 3.
Using bolts (D), and washers (F) attach stretchers (C) to foot panels (B).
G
D
G
G
E
D
X 16
G
4
Step 5.
Turn the assembled bar stool upright on a flat surface.
5
/
