Contec PCE78/9PS Owner's manual

Contec
Brand
Contec
Model
PCE78/9PS
Type
Owner's manual

Contec PCE78/9PS: This cable converts the CN1 (78-pin D-SUB connector) on the board of RS-232C 8CH to 9-pin D-SUB male connectors for four channels. Suitable boards include COM-8C-PE, COM-8(PCI)H, and COM-8(PCI). It features a 70.0mm x 18.0mm external dimension, a 1000mm cable length, and a weight of 680g. The cable is a 9 core shield cable with a conductor size of AWG28 and a conductor composition of 7pcs/0.127mm UL2919. It supports various signals, including SG, DTR, TxD, RxD, DCD, RI, CTS, RTS, and DSR. The PCE78/9PS is a versatile cable that enables

Contec PCE78/9PS: This cable converts the CN1 (78-pin D-SUB connector) on the board of RS-232C 8CH to 9-pin D-SUB male connectors for four channels. Suitable boards include COM-8C-PE, COM-8(PCI)H, and COM-8(PCI). It features a 70.0mm x 18.0mm external dimension, a 1000mm cable length, and a weight of 680g. The cable is a 9 core shield cable with a conductor size of AWG28 and a conductor composition of 7pcs/0.127mm UL2919. It supports various signals, including SG, DTR, TxD, RxD, DCD, RI, CTS, RTS, and DSR. The PCE78/9PS is a versatile cable that enables

1 PCE78/9PS
Connection Conversion Cable for RS-232C (78Pin→9Pin×8)
PCE78/9PS User’s Guide
CONTEC CO.,LTD.
This cable converts the CN1 (78-pin D-SUB connector) on the board of RS-232C 8CH to 9-pin D-SUB
male connectors for four channels as shown below.
Suitable boards : COM-8C-PE, COM-8(PCI)H, COM-8(PCI)
External Dimensions
18.0mm
70.0mm
1
78
21
40
20
39
59
60
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
1000mm
5
1
6
33.1mm
9
15.0mm
Specifications
Item Specification
Connector 78-pin
D-SUB
male connector
Thumb screw:
UNC#4-40(
Inch screw
)
9-
p
in D-SUB male connector Screw nut: UNC#4-40 (Inch screw)
x 8
Cable
9 core shield cable Conductor size: AWG28 Conductor composition: 7pcs/0.127mm UL2919
Weight
680g
Notes!
- Do not strike or bend the product. Otherwise, the product may malfunction, overheat, cause a
failure or breakage.
- Do not insert or remove the connector while the power is turned on to the PC. Failure to observe
this precaution may cause malfunction, overheating.
- The specifications of this product are subject to change without notice for quality improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
- Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for any results of using the product.
- All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
PCE78/9PS User’s Guide
Copyright 2013 CONTEC CO., LTD. ALL RIGHTS RESERVED.
CONTEC CO., LTD. October 2013 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/ A-41-998 (LZH7212)
Chinese http://www.contec.com.cn/ 10162013_rev5 [11301998]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
Connection Diagram
Pin No.
Pin No.on
the 9-pin
D-SUB
connectors
Pin No.
Pin No.on
the 9-pin
D-SUB
connectors
Pin No.
Pin No.on
the 9-pin
D-SUB
connectors
Pin No.
Pin No.on
the 9-pin
D-SUB
connectors
60 CH8-5 40 CH8-9 21 CH8-8 1 CH8-4
61 N.C. 41 CH8-1 22 CH8-7 2 CH8-2
62 CH7-9 42 CH8-6 23 CH7-8 3 CH8-3
63 CH7-5 43 CH7-4 24 CH7-7 4 CH7-2
64 N.C. 44 CH7-1 25 CH7-6 5 CH7-3
65 CH6-5 45 CH6-9 26 CH6-8 6 CH6-4
66 N.C. 46 CH6-1 27 CH6-7 7 CH6-2
67 CH5-9 47 CH6-6 28 CH5-8 8 CH6-3
68 CH5-5 48 CH5-4 29 CH5-7 9 CH5-2
69 CH4-9 49 CH5-1 30 CH5-6 10 CH5-3
70 CH4-5 50 CH4-4 31 CH4-8 11 CH4-2
71 CH4-6 51 CH4-1 32 CH4-7 12 CH4-3
72 CH3-5 52 CH3-9 33 CH3-8 13 CH3-4
73 N.C. 53 CH3-1 34 CH3-7 14 CH3-2
74 CH2-9 54 CH3-6 35 CH2-8 15 CH3-3
75 CH2-5 55 CH2-4 36 CH2-7 16 CH2-2
76 N.C. 56 CH2-1 37 CH2-6 17 CH2-3
77 CH1-5 57 CH1-9 38 CH1-8 18 CH1-4
78 N.C. 58 CH1-1 39 CH1-7 19 CH1-2
59 CH1-6
1214060
20
395978
20 CH1-3
-
-
-
-
-
-
-
-
-
-
5
4
3
2
1
SG 1
DTR 1
TxD 1
RxD 1
DCD 1
9
8
7
6
RI 1
CTS 1
RTS 1
DSR 1
CH1
CH8
5
4
3
2
1
SG 8
DTR 8
TxD 8
RxD 8
DCD 8
9
8
7
6
RI 8
CTS 8
RTS 8
DSR 8
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
  • Page 1 1
  • Page 2 2

Contec PCE78/9PS Owner's manual

Contec
Brand
Contec
Model
PCE78/9PS
Type
Owner's manual

Contec PCE78/9PS: This cable converts the CN1 (78-pin D-SUB connector) on the board of RS-232C 8CH to 9-pin D-SUB male connectors for four channels. Suitable boards include COM-8C-PE, COM-8(PCI)H, and COM-8(PCI). It features a 70.0mm x 18.0mm external dimension, a 1000mm cable length, and a weight of 680g. The cable is a 9 core shield cable with a conductor size of AWG28 and a conductor composition of 7pcs/0.127mm UL2919. It supports various signals, including SG, DTR, TxD, RxD, DCD, RI, CTS, RTS, and DSR. The PCE78/9PS is a versatile cable that enables

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents