Contec CPSN-MCB271-S1-041 Reference guide

Reference Manual

(Software)

CONTENTS

Remote I/O CPU Unit

CPSN-MCB271-S1-041

Remote I/O Model CPU Unit (LAN HUB)

CPSN-MCB271-1-041

Introduction .................................................................. 5

Safety Precautions .................................................... 11

Set the Computer Network ................................... 15

CONPROSYS nano WEB Setting .......................... 21

Access to Devices ..................................................... 58

Modbus Communication Function .................... 88

Virtual Address Map ............................................. 119

Maintenance ............................................................ 167

Troubleshooting ..................................................... 171

Appendix ................................................................... 174

Customer Support and Inquiry ......................... 204

— 2 —

Table of Contents

Introduction ...................................................................... 5

1. Procedure until ready to use ..............................................................................................................................6

2. Related manuals ......................................................................................................................................................7

3. Check the firmware version ................................................................................................................................8

4. About the product ..................................................................................................................................................9

5. Features ................................................................................................................................................................... 10

Safety Precautions ......................................................... 11

1. Safety Information ............................................................................................................................................... 12

2. Handling Precautions ......................................................................................................................................... 13

3. Security Warning .................................................................................................................................................. 14

1. Information security risks ........................................................................................................................... 14

2. Security measures – e.g. ............................................................................................................................. 14

Set the Computer Network ........................................... 15

1. Connect with a PC ............................................................................................................................................... 16

2. Set the Computer Network .............................................................................................................................. 17

1. Computer Network Setting Procedure (for Windows 10) ............................................................. 17

3. Check Communication ...................................................................................................................................... 20

CONPROSYS nano WEB Setting .................................... 21

1. CONPROSYS nano WEB Setting Outline .................................................................................................... 22

1. Setup Using a Web Browser ..................................................................................................................... 22

2. Setting the Browser ...................................................................................................................................... 22

3. Start up CONPROSYS nano WEB Setting ............................................................................................. 23

4. CONPROSYS nano WEB Setting Basic Operation ............................................................................ 24

2. Menu Function List .............................................................................................................................................. 25

3. Function Details .................................................................................................................................................... 26

1. System ............................................................................................................................................................... 26

2. Device I/O Control ........................................................................................................................................ 28

3. I/O Module ...................................................................................................................................................... 31

4. Network Time ................................................................................................................................................. 40

5. Log ...................................................................................................................................................................... 41

6. System ............................................................................................................................................................... 42

7. Log Information ............................................................................................................................................. 44

8. I/O Data View ................................................................................................................................................. 46

9. Modbus Data View ....................................................................................................................................... 48

10. Firmware Update ........................................................................................................................................... 49

11. Configuration File.......................................................................................................................................... 50

12. Time Adjustment ........................................................................................................................................... 51

13. Default Setting ............................................................................................................................................... 52

14. Save & Reboot ............................................................................................................................................... 53

— 3 —

Table of Contents

15. Save .................................................................................................................................................................... 54

16. Reboot ............................................................................................................................................................... 55

17. Shutdown ......................................................................................................................................................... 56

18. Logout ............................................................................................................................................................... 57

Access to Devices ........................................................... 58

1. Control I/O Module from CODESYS ............................................................................................................. 59

1. Setup .................................................................................................................................................................. 59

2. Programing ...................................................................................................................................................... 60

2. Control I/O Module from Windows PC....................................................................................................... 76

1. Setup .................................................................................................................................................................. 76

2. Installing the Hardware .............................................................................................................................. 77

3. Initializing the Software .............................................................................................................................. 78

4. Operation Checks .......................................................................................................................................... 79

5. Setup Troubleshooting ............................................................................................................................... 83

3. Control COM Port from Windows PC .......................................................................................................... 84

1. Setup .................................................................................................................................................................. 84

2. Initializing the Software .............................................................................................................................. 85

4. Control Flow of I/O Module ............................................................................................................................ 86

1. CPSN-DI-16BCL.............................................................................................................................................. 86

2. CPSN-CNT-3201I ........................................................................................................................................... 87

Modbus Communication Function ............................... 88

1. Modbus Slave ........................................................................................................................................................ 89

1. Communication Function .......................................................................................................................... 89

2. Function Code ................................................................................................................................................ 90

3. Data Type ......................................................................................................................................................... 90

4. Corresponding I/O Module....................................................................................................................... 91

5. Register Address Allocation ...................................................................................................................... 93

6. Register Address ............................................................................................................................................ 94

Virtual Address Map .................................................... 119

1. Virtual Address Map .........................................................................................................................................120

Virtual Address Space ...............................................................................................................................120

Common Device Information (00000000h) ......................................................................................121

Device-Specific Information (00100000h) .........................................................................................124

I/O Space (00300000h) .............................................................................................................................126

Maintenance ................................................................. 167

1. Maintenance ........................................................................................................................................................168

2. Save a File .............................................................................................................................................................169

Procedure .......................................................................................................................................................169

3. Write a File............................................................................................................................................................170

Procedure .......................................................................................................................................................170

— 4 —

Table of Contents

Troubleshooting ........................................................... 171

1. If You Encounter a Problem? .........................................................................................................................172

1. General ............................................................................................................................................................172

Appendix ...................................................................... 174

1. Software Specifications ...................................................................................................................................175

1. CPU Unit .........................................................................................................................................................175

2. I/O Module ....................................................................................................................................................177

2. Modbus Communication Specification .....................................................................................................185

1. Outline .............................................................................................................................................................185

2. Message Frame ............................................................................................................................................185

3. Function Code ..............................................................................................................................................187

4. Data Type .......................................................................................................................................................187

5. PDU Frame Format .....................................................................................................................................188

3. F&eIT Protocol Specifications .......................................................................................................................193

1. Communication Server Concept ...........................................................................................................193

2. Basic Specifications ....................................................................................................................................195

3. Control Information ...................................................................................................................................201

4. LED ...........................................................................................................................................................................202

5. Push Switch (SW) ...............................................................................................................................................203

Customer Support and Inquiry ................................... 204

1. Services ..................................................................................................................................................................205

— 5 —

Introduction

This chapter provides necessary information of the product

such as the product configuration and manuals before

actual use.

—

Introduction

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 6 —

1. Procedure until ready to use

The followings show the standard procedure until the product is ready to use.

Connect with a PC

Refer to

Page 16

Set up the network of PC

Refer to

Page 17

Set up with CONPROSYS nano WEB Setting

Refer to

Page 21

Set Password

Refer to

Page 26

Save the settings

Refer to

Page 53

Set up the product

Refer to Reference

Manual (Hardware)

*This procedure can be different depending on the user's environment or system types.

—

Introduction

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 7 —

2. Related manuals

The manuals related to the product are listed below.

Read them as necessary along with this document.

 Must read the following manuals.

Name

When to read

Contents

How to get

Product Guide

Must read this after opening the

package.

This lists the product

configuration and describes the

precautions.

Included in the package

(Printed matter)

Reference Manual for I/O

Module (Hardware)

Read this when operating the

I/O module with CPU Unit.

This describes the hardware

aspects such as functions and

settings of the I/O module.

Download from

the CONTEC

website (PDF)

Reference Manual for CPU

Unit (Hardware)

Read this when operating the

product. functions and settings.

This describes the hardware

aspects such as functions and

settings.

Download from

the CONTEC

website (PDF)

Reference Manual for CPU

Unit (Software)

Read this when setting up the

"CONPROSYS nano WEB

Setting"

This describes how to set each

function of "CONPROSYS nano

WEB Setting".

Download from

the CONTEC

website (PDF)

 Download manuals

Download the manuals from the following URL.

Download

https://www.contec.com/download/

—

Introduction

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 8 —

3. Check the firmware version

Before running the product, visit our website to check the firmware version and update to the latest

one if necessary.

Updating firmware to the latest version will resolve troubles and stabilize the operation.

Download

https://www.contec.com/download/

* Refer to the “Firmware Update (page49)” for further details.

—

Introduction

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 9 —

4. About the product

This product is a remote I/O type CPU Unit containing RS-232C *1 and LAN interface along with four

expansion slots. Arrange and combine I/O modules of CONPROSYS nano series to satisfy your needs.

Moreover, it is controllable from Windows / Linux PC, and Modbus TCP Slave, Modbus RTU Slave are

supported.

*1 This is available with the CPSN-MCB271-S1-041 model only.

—

Introduction

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 10 —

5. Features

 Compatible with Modbus TCP Slave and Modbus RTU

Slave *1

Modbus is a communication protocol widely adopted in the industrial sector.

Controlling and collecting data from higher-level devices with Modbus master function can be conducted.

*1 To use the RS-422A/485 (multi-drop), the CPSN-COM-1PD module is required and the firmware version in the product should be

1.10 or later.

 Applicable with Windows driver software

The product supplies UDP/IP-based original protocol (F&eIT) and applications can be created with Windows driver software in the Win32

API function format (DLL).

On top of that, you can check whether software and hardware are operating properly with the diagnostic program.

 Support the virtual COM driver *2

Software virtual COM driver enables you to operate the product in the same way as PC COM port (standard COM). Applications can be

created with the OS standard Win32 API communication function.

*2 The CPSN-MCB271-1-041 requires the CPSN-COM-1PD module to support this feature.

— 11 —

Safety Precautions

Understand the following definitions and precautions to

use the product safely. Never fail to read them before using

the product.

—

Safety Precautions

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 12 —

1. Safety Information

This document provides safety information using the following symbols to prevent accidents

resulting in injury or death and the destruction of equipment and resources.

Understand the meanings of these labels to operate the equipment safely.

DANGER

DANGER indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury or in property damage.

—

Safety Precautions

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 13 —

2. Handling Precautions

CAUTION

 The specifications of the product are subject to change without notice for enhancement and

quality improvement. Even when using the product continuously, be sure to read the manual

in the CONTEC’s website and understand the contents.

 Do not modify the software.

CONTEC will bear no responsibility for any problems, etc., resulting from modifying the

software.

 Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that

may appear in this document or for results obtained by the user as a result of using the

software.

—

Safety Precautions

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 14 —

3. Security Warning

When connecting to the network, be aware of security-related problems. See the examples of

Security measures below and set up the product properly along with the network devices.

1. Information security risks

 Unauthorized access from the outside through a network could cause the system halt, data

damage, or exposure to malware. *1

 Invaded and used as a stepping stone, a device might attack the others through networks. (a

victim becomes an assailant)

 Information might leak without realizing due to the connection to the network.

 Secondary damages such as harmful rumors, liability in damages, social credibility fall, and

opportunity loss are expected led by the troubles described above.

*1: Malware (Malicious Software) is software that brings harm to a computer system and performs

unintended operations.

2. Security measures – e.g.

 Do not keep using the default password. (Refer to the product manual for the password

setting).

 Set a strong password.

Combined with upper and lowercase letters, and numbers so that it cannot be easily

analogized by others.

 Change the password periodically.

 Disable unnecessary network services and functions.

 Restrict access to the network with network devices. *2

 Restrict ports to be released on the network with network devices. *2

 Create a closed network connection using such as dedicated network or VPN*3

*2: Inquire for setting procedure to manufacturers.

*3: VPN (Virtual Private Network) a secured network that wards off unauthorized access by

protecting the communication path with authentication and encryption.

Unfortunately, there are no perfect ways to avert unauthorized access or close a security hole

that are endlessly found day and night.

Please understand that risks are always involved with the Internet connection, and we strongly

recommend a user should constantly update information security measures.

— 15 —

Set the Computer

Network

This chapter describes how to connect the product with a

PC, set the network, and check the communication.

—

Set the Computer Network

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 16 —

1. Connect with a PC

To set the product, you need to first set up the network between the PC and the product in order to

establish communication.

First, connect the product with the PC.

1 Follow the instructions below to connect the computer, the controller, and the power unit.

* Refer to “Reference Manual (Hardware)” for how to create a power cable.

2 Connect the power unit with AC plug, then turn on the computer.

—

Set the Computer Network

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 17 —

2. Set the Computer Network

Follow the “Computer Network Setting Procedure” described below and set the network to make the

IP addresses as shown.

The product must set a unique IP address for the bold part (200 or 101) that is not used by other

devices on your network.

* If proxy is set to your PC, do not use the proxy.

1. Computer Network Setting Procedure (for Windows 10)

1 Click the [Network & Internet] on [Windows Settings] screen.

2 Click the [Change adapter options] in [Network status].

—

Set the Computer Network

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 18 —

3 Double-click the appeared [Ethernet]

4 Click the [Property] in [Ethernet Status] dialog box.

5 Double-click the [Internet protocol version 4(TCP/IPv4)] in [Ethernet Properties] dialog box.

—

Set the Computer Network

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 19 —

6 In the [Internet protocol version 4 (TCP/IPv4) property], set IP address and Subnet mask as

shown below.

7 Click the [OK] → the [OK] → the [Close] to close the dialog box and complete the network

setting.

—

Set the Computer Network

—

CPSN-MCB271-S1-041, CPSN-MCB271-1-041 Reference Manual (Software)

— 20 —

3. Check Communication

1 Start the Internet Explorer 11 on your computer. Enter IP address (10.1.1.101) of the controller

in the address bar, then press [Enter] key.

The dialog box asking for the Password appears, enter it and click the [Login].

* Refer to “Setup Using a Web Browser (page22) for details of compatible web browser.

* For an actual operation, change Password in [Settings] – [System] on CONPROSYS nano WEB

Setting page.

* After entering IP address and pressing [Enter] key, the “Security certificate” might appear on the

screen. Choose “Continue to this website”.

2 If CONPROSYS nano WEB Setting page appears, it indicates the success of the communication

between the computer and the controller.

Page is loading ...

Contec CPSN-MCB271-S1-041 Reference guide

This manual is also suitable for

Contec CPSN-MCB271-S1-041 Reference guide

Related papers

Other documents