DYNATEK DYNA FS is a complete ignition kit designed to work with the stock coil, coil wire, plug cap, and spark plug. It includes a mounting bracket, 8” tie wraps, Curve Selector Switch, and instruction sheets.

The Dyna FS ignition is preprogrammed with four timing curves, which can be selected by the curve selector switch. Curve 4 is identical to the curve that came with the stock ignition module. Curves 1, 2, and 3 offer different timing advances for improved performance.

The ignition also includes a programmable launch limiter, tachometer output, and two programmable RPM switches. The launch limiter can be used to limit the engine's RPM during launch, and the RPM switches can be used to activate solenoids or relays.